Skip to main content

All Questions

Filter by
Sorted by
Tagged with
1 vote
0 answers
13 views

Efficiency of a 2-stroke spark-ignition IC engine

Efficiency of a 2-stroke spark-ignition IC engine The slope of $\eta$ vs $r$ graph is steep at less $r$, so is it possible to use more than one cylinder, with less compression ratio with the nth ones ...
Om Agrawal's user avatar
1 vote
3 answers
60 views

Why doesn't a metal disk expand in all directions when heated?

The hole in a metal disk gets bigger when heated. This has been explained by the reason that if we take the already cut out piece of the metal and heat it separately it also gets bigger, but the metal ...
user162803's user avatar
0 votes
1 answer
19 views

Difference in efficiency of isobaric reversible and irreversible process [closed]

I know that the efficiency of a process depends on the reversibility of the same process. When the process is reversible, the efficiency is the highest. Although I don't understand how this works for ...
PhysicsEnthusiast's user avatar
0 votes
2 answers
47 views

Stefan and Boltzmann law

How does Stefan's law relate to cooling It tells about power radiated by a body at a certain temperature as related to a black body But it does not include how temperature of that body changes every ...
Ninja Ronin's user avatar
0 votes
1 answer
38 views

Phase transition and connection with fluid dynamics

In statistical mechanics, when there’s a phase transition, is there a mechanism that actually enforces it? For example, could there be some specific motion of the particles that forces a phase ...
Joshua Haim Mamou's user avatar
1 vote
1 answer
29 views

From material derivatives to partial derivatives in the wave equation

Consider the Cauchy momentum equation: $$\rho \frac{d^2 \mathbf{u}}{d t^2} = \nabla \cdot \boldsymbol{\sigma} + \rho \mathbf{f}$$ where $\rho(\mathbf{x},t)$ is the density, $\mathbf{u}(\mathbf{x},t)$ ...
Michał Kuczyński's user avatar
-1 votes
2 answers
36 views

Why must the total time derivative only be a linear function of velocity? [duplicate]

I'm hung up on page 7 of Landau & Lifshitz Course on Mechanics. They claim, $$L(v'^2) = L(v^2)+\frac{\partial L}{\partial v^2}2\textbf v\cdot \epsilon \tag{p.7}$$ The second term on the right of ...
Kyle Tennison's user avatar
0 votes
0 answers
26 views

How can one calculate the energy required to heat a substance from 298K to 6000K, factoring in formation enthalpies? [closed]

For the example of hydrogen, is it valid to subtract the enthalpy of $H_2$ at $298K$ from the enthalpy of $H$ (atomic) at $6000K$ (after converting $J/mol$ to $J/kg$ to account for the change in mole ...
nando2002's user avatar
-7 votes
0 answers
67 views

Theoretic advancements in the fundamentals of physics can offer a solution to the heat death? [closed]

Recent Rumination over the potential implications of advances in Fundamental Physics and whether they might provide a way to avoid or mitigate the heat death of the universe have led me to wonder if ...
Matt Harper's user avatar
1 vote
1 answer
35 views

Irreversible Processes in Thermodynamics

Here’s the updated text using dollar signs for MathJax formatting instead of parentheses: Question: Understanding Work in Irreversible Processes in Thermodynamics I am currently studying irreversible ...
Shiwam Bhashkar's user avatar
0 votes
0 answers
19 views

How Dump Tubes (arrangement with lot of perforation) reduces the pressure of Steam flow. How to derive a scientific basis of designing a dump tube [closed]

Recently I have come across simple yet intriguing device - The steam dump pipe with multiple perforations (orifices). The dump pipe is typically used to reduce the steam flow pressure. The inlet steam ...
JC_'s user avatar
  • 1
1 vote
0 answers
49 views

The Green's function for the four-dimensional solution of the Proca equation is what?

From the Proca equation: \begin{equation} \color{red}{\partial_\mu}\color{blue}{\partial^\mu}A^\nu-m^2A^\nu=-4\pi J^\nu\\ \end{equation} For the metric signature (-+++) and considering the steady-...
liangre's user avatar
  • 79
3 votes
1 answer
118 views

Covariant derivative acting on Dirac delta function

Pardon my naive computational question. In my calculations, I encounter the following expression: \begin{equation} \label{eq1} \frac{\delta}{\delta g^{\gamma \epsilon}(z)} \left( g_{\mu \alpha}(x) \...
haj's user avatar
  • 85
1 vote
1 answer
88 views

Is the second law of thermodynamics about microstates or macrostates?

The second law of thermodynamics says that entropy is increasing. Since the entropy of a given macrostate depends entirely on the probability distribution of the microstates this appears to be a ...
CBBAM's user avatar
  • 3,992
0 votes
1 answer
50 views

Whats the lowest energy substance reaches during adiabatic expansion of carnot engine? [closed]

In carnot engine we know the steps like first isothermal, than adiabatic, then reverse isothermal and adiabatic. And we know that efficiency increase if the temperature of hot box(heat supllier) is ...
kashpia tahamin's user avatar
-5 votes
0 answers
31 views

On Thermal Expansion [closed]

Can anyone tell me how d1= d2(1+gamma thetha)
Arceus's user avatar
  • 1
-10 votes
0 answers
48 views

hypthesis how big bang expand [closed]

"D Hypothesis" – Space-Time Swapping and Energy Conservation Mechanism 1. The Concept of Space-Time Swapping The core idea of the D Hypothesis is the notion that space-time can be swapped ...
divyansh dhakad's user avatar
-2 votes
0 answers
107 views

State-dependent properties of different isolated atoms from hydrogen to copper [closed]

I am an independent researcher and I am working on a theory that could theoretically determine a temperature value for a single particle. With new equations I've derived, predicts the values in these ...
Kristo's user avatar
  • 25
4 votes
4 answers
688 views

Heating object in airless environment

Lets assume I had two containers sitting over a fire or some source of heat. Lets say I also placed two of the same objects with a low melting point in these containers (lets also assume this object ...
Sam's user avatar
  • 41
1 vote
1 answer
68 views

Understanding entropy and its connection to probability distributions

Entropy tells us about the "uncertainty" of a probability distribution, i.e. roughly how much information is needed to describe an event that is described by a probability distribution. With ...
CBBAM's user avatar
  • 3,992
2 votes
0 answers
36 views

Why is tensor product used to model the early and late time excitations of a region of a two-side black hole?

In their paper (Large $N$ algebras and generalized entropy), Witten et al. studied the excitations of the right side $R$ of a two-side black hole. They consider the algebra $\mathcal{A}_{R,0}$ ...
Kadi Harouna Illia's user avatar
2 votes
0 answers
36 views

Can a window fan keep heat indoors? [closed]

Can a window fan keep heat indoors when it is colder outside than inside? Suppose a window with 1 unit of area must be open. If the goal is to decrease the rate at which the inside / outside ...
mikebolt's user avatar
  • 121
0 votes
3 answers
51 views

How are heat capacities of substances measured?

To summarise Wikipedia: take substance at known temperature, add known amount of heat energy to it and measure the change in its temperature. But how do we add a known amount of heat energy?
lylehunder's user avatar
2 votes
1 answer
35 views

Does viscosity increase temperature of a fluid at the cost of macroscopic kinetic energy?

Viscosity on molecular level can be stated as a transfer of momentum from fast moving layers to slow moving layers through random molecular collisions. So can we state that (in case of no external ...
user avatar
0 votes
0 answers
34 views

What is the mechanism by which placing a spoon in a cup of water being heated in a microwave oven prevents the water from becoming super-heated?

Should I place a spoon in a cup of liquid before heating it in a mircowave? explains why one should do this and the safe ways of doing it, but it doesn't provide the physics behind it. What is the ...
Ray Butterworth's user avatar
2 votes
2 answers
81 views

Complete ionization temperature of an atom

If you google at which temperature hydrogen and helium are ionized completely, so that there is theoretically only a nucleus left, the given answers are around 10000K and 29000K respectively. Is there ...
Kristo's user avatar
  • 25
-1 votes
0 answers
78 views

NP-hard problems over honeycomb lattice [closed]

Are there physics-based NP-hard problems for spin models defined on the honeycomb lattice? I was not able to find much on Google Scholar. So far I have the following: Counting the number of “legal ...
Omar Shehab's user avatar
1 vote
0 answers
40 views

Mass Conservation in Kinetic Theory

In chapter 9 (The Boltzmann Equation) of Schwabl's 2006 text 'Statistical Mechanics', the author has the following statement of conservation of mass, $$ \frac{\partial n}{\partial t} + \nabla \mathrm{...
Zachary Candelaria's user avatar
2 votes
0 answers
36 views

Throwing near-boling water into minus 20C air

I have observed my daughter throw a flask of near-boiling water into the air outside at -20C. The water appears to turn into "steam" which actually appears to be ice crystals. She also tried ...
DJDJ's user avatar
  • 21
0 votes
0 answers
48 views

Maxwell's demon paradox and a Szilard engine

I’m now studying quantum information physics and have a question about Maxwell's demon paradox. I know an explanation using a Szilard engine but I omit the detailed settings as they are well known. ...
Kitchen's user avatar
  • 173
0 votes
0 answers
13 views

Relationship between temperature and mass dimension in AdS/CFT

I've been reading Hartnoll et. al.'s paper on holographic superconductors, specifically PRL 2008 https://doi.org/10.1103/PhysRevLett.101.031601. In the paper, they mention "Recall that $T$ (...
jboy's user avatar
  • 625
-1 votes
0 answers
63 views

Four gradient relation

I'm doing an exercise in QFT and I have to calculate the energy-momentum tensor for the Klein-Gordon Lagrangian and by doing it I got the following term: $$ \frac{\partial \ \partial^{\nu}\phi}{\...
syphracos's user avatar
  • 141
1 vote
1 answer
54 views

Mean-field theory and coarse-grained modelling: Are these the same methodology?

In statistical mechanics, a Mean Field Theory defined as solving the reduced representation of physical system, on the other hand Coarse-grained modelling has similar purposes. Are these two ...
patagonicus's user avatar
0 votes
1 answer
34 views

Work in a two-compartment system

A well-insulated container of fixed volume is divided into two equal compartments by a thermally-conductive, weightless, frictionless piston. Initially, compartment A, on the left, contains 50 mol of ...
thermo_help's user avatar
4 votes
2 answers
830 views

Confusion about reversibility of a carnot engine

I recently posted a question about entropy and the conversation changed topic to bring up an interesting question. @Chemomechanics explained that for a transformation to be reversible it is needed ...
Lorenzo's user avatar
  • 63
0 votes
0 answers
38 views

Are density perturbations possible in a globally homogeneous and isotropic universe such as ours...?

I would like to ask some questions about an interesting paper that was written back in the late 90's (https://arxiv.org/abs/astro-ph/9701131) There, the authors propose how the universe may evolve ...
vengaq's user avatar
  • 2,878
0 votes
1 answer
20 views

What does breaking or overcoming intermolecular forces mean?

Latent heat is thermal energy that rather than increasing the temperature or the kinetic energy of a substance is used to break intermolecular forces. It is also defined as overcoming intermolecular ...
Ahmed Nadeem's user avatar
1 vote
0 answers
92 views

Why can I hear when my shower gets hot?

I noticed recently that when I turn on my shower, I can hear the moment that the water heats up. The hissing sound gets slightly louder and its pitch changes. The pressure doesn't noticeably change ...
user34722's user avatar
  • 3,195
1 vote
0 answers
24 views

I have some questions about heat transfer (heat evaporative minichannel heat sink)

Problem Description As shown in the diagram, an evaporative minichannel heat sink with 48 minichannels is being analyzed. A glass plate is attached to the top of the minichannels for flow ...
Hongjun Youn's user avatar
0 votes
0 answers
27 views

Nusselt number for developing turbulent flow

I need to develop a uniform method to cool a plate 1 degree, our idea was to let helium flow under it to transfer heat via convection. I concluded by some calculations that the Nusselt number for ...
Day Time Gamer's user avatar
0 votes
0 answers
16 views

Good resource for thermodynamics [duplicate]

I am looking for a good resource (preferably a book) on thermodynamics. I am currently an high schooler -- that pretty much sums up my mathematical qualifications so I was looking for something not ...
1 vote
1 answer
65 views

Internal energy of a gas and $p$-$V$ curve

The internal energy is said to be same for 2 gases which have undergone 2 different processes. The same is often explained by a $p$-$V$ curve. If the initial and final final points of 2 different ...
T Es's user avatar
  • 13
1 vote
0 answers
33 views

Hawking radiation without horizons

According to this Bigthink article which cites this paper all massive objects emit Hawking radiation because they curve spacetime. But I thought Hawking radiation is the time reversal of a particle ...
Kevin Kostlan's user avatar
1 vote
1 answer
173 views

Exercise about entropy

I solved the following problem, but I still have some doubts: The problem: "Two equal quantities of water at temperatures $T_1$ and $T_2$ respectively, with a mass $m$ and specific heat $c$, are ...
Lorenzo's user avatar
  • 63
-3 votes
4 answers
98 views

Zero Kelvin and Negative Kelvin [duplicate]

Basically the word Temperature (in Kelvin) of the body is the average Kinetic Energy of molecules in a body. Zero Kelvin is understandable that all molecules kinetic energy is Zero But what is ...
Praneel's user avatar
  • 74
5 votes
3 answers
318 views

Taking derivative with respect to quantum canonical ensemble expectation value

Let's say I have a Hamiltonian operator $H(x_a..)$, where $x_a,x_b$ are some parameters of my Hamiltonian. I can calculate the quantum canonical ensemble expectation value of $\frac{\partial H}{\...
Tixuan Tan's user avatar
2 votes
4 answers
96 views

Effect of movement of container on pressure of gas

Take a case- We have two containers A and B, one of the containers is moving with constant velocity while the other one is stationary. Both containers are identical, have same gas, same number of ...
Physics_enthus's user avatar
9 votes
3 answers
1k views

What if gas molecules collide inelastically?

I know that inelastic collision ($e=0$) of gas molecules does not make sense, but I wonder, if somehow hypothetically gas molecules made inelastic collision with the container in which it is filled ...
Het Patel's user avatar
  • 608
1 vote
1 answer
94 views

Why does the partition function require an integral?

The partition function of a single particle can be given by: $$Z_1 = \sum_{E_r}^{}e^{-\beta E_r}$$ Where $E_r$ denotes the energy of microstate $r$ But the energy of a particle is given by: $$E_r = \...
cookiecainsy's user avatar
3 votes
0 answers
43 views

Why do airplane air conditioning systems use a turbine to expand air? [closed]

Why do airplane air conditioning systems use a turbine to expand air? The cooling medium in airplanes is air. The Joule-Thomson effect causes the temperature to drop during expansion under these ...
Krzysiek's user avatar

1
2 3 4 5
345