Skip to main content

All Questions

Filter by
Sorted by
Tagged with
0 votes
1 answer
7 views

How to determine air velocity in open ended tube?

I am an electrical engineer but was tasked with something a little different this time around and was hoping you guys could help. I would like to determine if my dry air system is sufficient for my ...
Jason O'Connor's user avatar
0 votes
0 answers
6 views

From material derivatives to partial derivatives in the wave equation

Consider the Cauchy momentum equation: $$\rho \frac{d^2 \mathbf{u}}{d t^2} = \nabla \cdot \boldsymbol{\sigma} + \rho \mathbf{f}$$ where $\rho(\mathbf{x},t)$ is the density, $\mathbf{u}(\mathbf{x},t)$ ...
Michał Kuczyński's user avatar
0 votes
0 answers
26 views

Lattice Boltzmann Methods

I'm reading an article from Shiyi Chen et.al named "On boundary conditions in lattice Boltzmann methods". In the first section they proceed to the well known Chapman-Enskog expansion in ...
Tristan Millet's user avatar
1 vote
0 answers
25 views

Questions on surface tension

I've learned that surface tension occurs due to the difference between the molecules of surface and the bulk molecules and the asymmetry between them. The particles next to the walls of the container ...
PRM's user avatar
  • 11
1 vote
1 answer
18 views

'Physics behind the morphology of clouds' book recommendations?

Clouds are a wonderful and fascinating tracer of atmospheric motions, and I keep wondering if there's a textbook/popular science book out there that focuses on explaining the atmospheric dynamics/ ...
0 votes
1 answer
28 views

Ideal fluid flow in a frictionless pipe at same horizontal level

Assume ideal fluid in a frictionless pipe at same horizontal level. If we apply an external force and then remove it. 1.Will the fluid keep flowing with the same velocity? What is meant by pressure ...
Samar Gupta's user avatar
0 votes
0 answers
35 views

What is meant by fluid pressure?

I understand that fluid pressure means the pressure the fluid exerts on some surface, but what surface are we talking about? Is it the force exerted on tubing or the fluid itself or are these both the ...
Kryptic Coconut's user avatar
4 votes
1 answer
202 views

Can the irrotational vortex be described using spherical harmonics?

THE BACKGROUND: The irrotational vortex is an ideal fluid flow that can be represented via the following expressions in cylindrical $\{R,\psi,z\}$ and spherical $\{r,\theta,\varphi\}$ coordinates: $$\...
aghostinthefigures's user avatar
0 votes
0 answers
12 views

How to use Bernoulli Equation in a rotating reference frame in this problem? [closed]

I've been trying to think how can we use the value of pressure to find the inlet flow rate because I don't see another use for that value and I believe they have to be relate because of conservation ...
Augusto's user avatar
1 vote
1 answer
41 views

Why do we include both local and temporal acceleration in fluid mechanics but only consider temporal acceleration in solid-body mechanics?

I am a beginner in physics, and I was studying fluid mechanics, specifically Newton's second law, when I was surprised to find that the expression for acceleration was composed of both local and ...
Bezina Taki's user avatar
0 votes
0 answers
17 views

How Dump Tubes (arrangement with lot of perforation) reduces the pressure of Steam flow. How to derive a scientific basis of designing a dump tube [closed]

Recently I have come across simple yet intriguing device - The steam dump pipe with multiple perforations (orifices). The dump pipe is typically used to reduce the steam flow pressure. The inlet steam ...
JC_'s user avatar
  • 1
-1 votes
1 answer
47 views

Reynolds Transport Theorem in a Non-deforming Control Volume Moving At a constant velocity [closed]

Question: In this problem do I have to use Bernoulli's equation to find the velocities in sections 2,3 and 4? and I want to know that can I assume that the flow is uniform. Edit: I'm not looking for ...
illestboi's user avatar
2 votes
2 answers
71 views

While crossing a river should we cross it at wider regions or narrower region? [closed]

I know that in wider regions velocity of river is less than that in narrower region. This suggests that we should cross the river at the wider region. But at wider regions pressure is more due to the ...
user avatar
-2 votes
0 answers
76 views

Has low pressure been generated in the open space of this device?

A represents the left and right speakers, B represents the left and right baffles, C represents the rectangular holes on the left and right baffles through which the sound waves from the speakers can ...
enbin's user avatar
  • 2,165
2 votes
0 answers
36 views

Can a window fan keep heat indoors? [closed]

Can a window fan keep heat indoors when it is colder outside than inside? Suppose a window with 1 unit of area must be open. If the goal is to decrease the rate at which the inside / outside ...
mikebolt's user avatar
  • 121
0 votes
1 answer
33 views

Hydrostatic equilibrium and fluid velocity

If we consider a fluid with velocity $\vec{u}_0 = u_0 \hat{x} + v_0 \hat{z}$ which is now in hydrostatic equilibrium. I know that the force associated to the gravity and force associated with the the ...
merlinbluepickle's user avatar
1 vote
0 answers
56 views

Determine the maximum and minimum acceleration from the velocity field [closed]

If the speed distribution, in m/s, of a flow is given by $v = 2x^3 + 2y^2 - 3z$, then the acceleration of the fluid at the point with coordinates $[2, 1, 5]$, in meters, will be greater than $20, \...
lucas bublitz's user avatar
1 vote
0 answers
56 views

Forces on a 18th century ship [closed]

I am trying to make a 18th century ship simulation where the ships are moved by the aerodynamic forces in their sails and the hydrodynamic forces on their hulls. The simulation is in 2D, so I ignore ...
Depenau's user avatar
  • 555
0 votes
1 answer
36 views

Potential flow over a sphere in circular motion

The potential for a sphere moving in a straight line with a constant velocity U in an incompressible, inviscid and irrotational fluid is given by the following potential: $$ \phi =−U \left(r+\frac{a^3}...
Luca Giulioni's user avatar
2 votes
1 answer
35 views

Does viscosity increase temperature of a fluid at the cost of macroscopic kinetic energy?

Viscosity on molecular level can be stated as a transfer of momentum from fast moving layers to slow moving layers through random molecular collisions. So can we state that (in case of no external ...
user avatar
2 votes
0 answers
34 views

Throwing near-boling water into minus 20C air

I have observed my daughter throw a flask of near-boiling water into the air outside at -20C. The water appears to turn into "steam" which actually appears to be ice crystals. She also tried ...
DJDJ's user avatar
  • 21
1 vote
0 answers
92 views

Why can I hear when my shower gets hot?

I noticed recently that when I turn on my shower, I can hear the moment that the water heats up. The hissing sound gets slightly louder and its pitch changes. The pressure doesn't noticeably change ...
user34722's user avatar
  • 3,195
0 votes
0 answers
27 views

Nusselt number for developing turbulent flow

I need to develop a uniform method to cool a plate 1 degree, our idea was to let helium flow under it to transfer heat via convection. I concluded by some calculations that the Nusselt number for ...
Day Time Gamer's user avatar
0 votes
0 answers
30 views

Thrust on container due to effluxing fluid

we know that by F=dP/dt=vdm/dt=pav^2 where p is density and P is momentum.considering the hole really small compared to the container. however by Bernoullis equation Pressure(inside)= Presure(atm) + 1/...
Kshitij's user avatar
0 votes
0 answers
11 views

What equation models the shear rate as a function of the cross-sectional height of a square channel in lamina flow?

I am trying to model how shear rate changes across the cross section of a square channel (in a microfluidic device), depending on the height+width, fluid viscosity (assuming water) given it is fully ...
heptanitrocubane's user avatar
0 votes
0 answers
22 views

How to (coarsely) estimate turbulent kinetic energy (TKE) dissipation in a large tank?

I'm wondering if it is possible to say something semi-quantitative (approximate order of magnitude) about turbulent kinetic energy (TKE) dissipation in a large tank of water (6 m tall, 3 m wide). The ...
Tor's user avatar
  • 111
1 vote
2 answers
68 views

Doubt with Heat and Potential Energy. (Warning: Many Assumptions) [closed]

I had a question in my Textbook which reads as follows, Before that, we have to assume that the flowing water is ideal. So, here we have to equate Change in Potential Energy to Heat Energy/Internal ...
Anirudh Reddy M's user avatar
0 votes
0 answers
15 views

Measuring a fluid's temperature using video of a drop falling into the fluid

Katie Bouman's PhD thesis begins with the following paragraph: Watching a raindrop fall into a puddle of water, causing a ring of expanding ripples, may seem mundane. However, behind this commonplace ...
Tamas Ferenci's user avatar
1 vote
0 answers
30 views

Is the Mach cone the model of a shockwave?

I am in the process of writing a mathematics paper which aims to model the interaction of a supersonic (or transonic for that matter) object with a flat plane. I need to determine the shape that a ...
Bubber-ducky's user avatar
0 votes
0 answers
11 views

Difference between Pressure Jump and Pressure Gradient in multiphase flow, and Relationship between them

Assuming we have a multiphase flow (maybe a bubble immersed in water) with interface separating between the two phases. The interface is defined with a certain surface tension. Due to the liquid ...
jamill1283's user avatar
0 votes
0 answers
24 views

High-performance liquid chromatography (HPLC) injection

While practicing with high-performance liquid chromatography (HPLC), my lecturer asked me to inject the syringe slowly into six-port valve. She briefly explained that fast injection is disadvantageous ...
Shira's user avatar
  • 109
0 votes
0 answers
30 views

Interaction of Supersonic and Hypersonic Objects

Lets imagine you are chilling in a plane cruising at some Mach 1 or Mach 2. Behind you, parallel with your direction a Mach 11 missile passes you by. What would you experience? Would you experience ...
User198's user avatar
  • 904
0 votes
0 answers
18 views

Can the turbulent viscosity in Large Eddy Simulation (LES) be taken out of the derivative for compressible flows?

I am working on Large Eddy Simulation (LES) for compressible flows and using the Smagorinsky model to compute the turbulent viscosity $\nu_t$. In the filtered Navier-Stokes equations for compressible ...
Somestudent01's user avatar
0 votes
0 answers
21 views

Would an object floating on a very low dense object go away by the force of air resistance?

Suppose that you have an object that is floating on the surface of a fluid. If the fluids viscosity was low enough, would normal air have enough drag to make it go away flying? If it would, how would ...
lemmgua's user avatar
-1 votes
0 answers
47 views

Does Bernoulli's Equation make Wind Tunnels Inaccurate?

From what I understand, Bernoulli's equation should be applied in the reference frame of still fluid. Using Bernoulli's equation to a wind tunnel, we find that the pressure inside a wind tunnel should ...
Fluidized Pigeon Reactor's user avatar
0 votes
0 answers
18 views

Extrapolating Missing Water Level Gage Data - Best Method

I'm interested in what would be the best method to extrapolate what may have been the peak surge elevation given some amount of data and a missing peak value due to the water level gage having topped ...
Adrian Beltran's user avatar
0 votes
0 answers
41 views

Bernoulli's Equation + Conservation of Mass

In the following example am I allowed to assume the velocity of point (1) is zero? my argument for this is that since $D_{tank}>>D_{tube}$ therefore by writing the continuity equation or ...
illestboi's user avatar
1 vote
0 answers
45 views

Fluid dynamics in Newtonian regime from action

I struggle to understand how one can get the Euler, continuity and Poisson equation describing a fluid in the weak gravity regime from the Einstein-Hilbert plus fluid matter action. Say I start from $$...
NicoPranzo's user avatar
1 vote
1 answer
40 views

Energy exchange between particle species in gravitational systems

Consider a gravitational system consisting of two different particle species. Particle 1 only interacts gravitationally. Particle 2 interacts gravitationally and via some short-range force such that ...
Lenard Kasselmann's user avatar
1 vote
1 answer
32 views

Why can't choked flow accelerate?

Why can't flow accelerate in the choked condition? I think the best way to explain my question is through an example, so here it is: Imagine you have $2$ boxes connected with a valve that is closed. ...
Wyatt's user avatar
  • 355
0 votes
0 answers
26 views

Torque Create by a propeller

I am working in a robotics project for a holomonic Drone, and I am having some difficulties understanding how a propeller generate thrust. My robot currently has 6 motors + rotors, all the motor are ...
André Teixeira's user avatar
0 votes
2 answers
60 views

Can Shear-Stress Cause Translation Motion? If Not, Why is There a Viscous Term in the Navier-Stokes Equations?

Something has recently begun to trouble me, specifically, the presence of the viscous shear term - ie $\mu \nabla^2 \mathbf{u}$ - in the Navier-Stokes equations. I'm somewhat troubled by the presence ...
Zachary Candelaria's user avatar
0 votes
1 answer
66 views

Is Stress a Derivative?

On page 289 of the text "Fundamentals of Fluid Mechanics" by Munson et al., the authors give the following definition of the normal stress acting on the surface of a fluid element: At any ...
Zachary Candelaria's user avatar
0 votes
2 answers
97 views

How to draw the Coriolis force in 2D?

I'm studying Geophysical fluid dynamics, especially the Coriolis force. Now, in my book, this force$^{1}$ is defined as: $$ \vec{F_c} = -fv \hat{x} + fu \hat{y} $$ where ($u,v$) are the components of ...
emek's user avatar
  • 3
1 vote
0 answers
35 views

Frank White's Fluid Mechanics pressure work derivation

So I have been trying to get my head around the derivation given by Frank White in his Fluid Mechanics book on pressure work (page 164,. He states that for mass going into the control volume, $$d\dot{...
Bogdan Profir's user avatar
0 votes
0 answers
49 views

Drag force equation using the pressure distribution in fluid dynamics

I want to obtain the drag force equation for a flow around a cylinder. Starting with the definition of pressure: $${\displaystyle d\mathbf {F} _{n}=-p\,d\mathbf {A} =-p\,\mathbf {n} \,dA.}\tag1$$ ...
User198's user avatar
  • 904
1 vote
0 answers
37 views

Explosions in high viscosity liquids

I was watching The Score (2001) in which De Niro manages to make a hole in a cobalt and titanium infused steel safe. he fills it with water. inserts an explosive and boom! the safe is open. It made me ...
Blake's user avatar
  • 11
0 votes
0 answers
41 views

Von Kármán momentum integral explanation

The Von Kármán momentum integral is the equation $${\displaystyle {\frac {\tau _{w}}{\rho U^{2}}}={\frac {1}{U^{2}}}{\frac {\partial }{\partial t}}(U\delta _{1})+{\frac {\partial \delta _{2}}{\partial ...
User198's user avatar
  • 904
1 vote
0 answers
22 views

Displacement thickness derivation in the Von Kármán momentum integral

The Von Kármán momentum integral is $${\displaystyle {\frac {\tau _{w}}{\rho U^{2}}}={\frac {1}{U^{2}}}{\frac {\partial }{\partial t}}(U\delta _{1})+{\frac {\partial \delta _{2}}{\partial x}}+{\frac {...
User198's user avatar
  • 904
0 votes
1 answer
51 views

Using bernoulli's equation in a siphon doesn't work out?

I was thinking about doing a simple siphon experiment for my physics project like the follwing image: The problem is, I can't calculate the flow rate of water in this situation - I used bernoulli's ...
fugue's user avatar
  • 3

1
2 3 4 5
144