7
$\begingroup$

Following up on this question: Weinberg says

In general, it may be possible by using suitable linear combinations of the $\psi_{p,\sigma}$ to choose the $\sigma$ labels in such a way that $C_{\sigma'\sigma}(\Lambda, p)$ is block-diagonal; in other words, so that the $\psi_{p,\sigma}$ with $\sigma$ within any one block by themselves furnish a representation of the inhomogenous Lorentz group.

But why inhomogeneous Lorentz group if, in the first place, we performed a homogeneous Lorentz transformation on the states, via $U(\Lambda)$? I also want to be clear what is meant by the states "furnishing" a representation.

Regarding the above confusion, the same scenario again shows up during the discussion on the little group. Here's a little background: $k$ is a "standard" 4-momentum, so that we can express any arbitrary 4-momentum $p$ as $p^{\mu} = L^{\mu}_{\nu}(p) k^{\nu}$, where $L$ is a Lorentz transformation dependent on $p$. We consider the subgroup of Lorentz transformations $W$ that leave $k$ invariant (little group), and find that:

$U(W)\psi_{k \sigma} = \sum_{\sigma'} D_{\sigma' \sigma}(W)\psi_{k \sigma'}$. Then he says:

The coefficients $D(W)$ furnish a representation of the little group; i.e., for any elements $W$ and $W'$ , we get $D_{\sigma' \sigma}(W'W) = \sum_{\sigma''}D_{\sigma' \sigma''}(W)D_{\sigma''\sigma}(W')$.

So is it that even in the first part about the Lorentz group, $C$ matrices furnish the representation and not $\psi$?

Also, for the very simplified case if $C_{\sigma'\sigma}(\Lambda, p)$ is completely diagonal, would I be correct in saying the following in such a case, for any $\sigma$?

$$U(\Lambda)\psi_{p,\sigma} = k_{\sigma}(\Lambda, p)\psi_{\Lambda p, \sigma}$$

Only in this case it is clear to me that $U(\Lambda)$ forms a representation of Lorentz group, since $\psi_{p,\sigma}$ are mapped to $\psi_{\Lambda p, \sigma}$.

$\endgroup$
4
  • $\begingroup$ Just a tip: no need to mark the questions as follow-up questions so boldly. I've made some cosmetic edits to this and your last question, but if I changed the meaning anywhere from what you wanted to ask, please do fix it. :-) $\endgroup$
    – David Z
    Commented May 25, 2013 at 6:33
  • 2
    $\begingroup$ A representation is a vector space with a group action attached to it. In linear algebra, it's a bunch of vectors $v^i$ which move around under the group action, i.e. when $g$ is a group element then there is a matrix $D(g)^i{}_j$ which acts on them as $D(g)^i{}_j v^j$. In QM/QFT, the vector space is spanned by states $|\psi(p,\sigma)\rangle$ (or whatever notation Weinberg uses). That what he means by "furnishing" a rep. $\endgroup$
    – Vibert
    Commented May 25, 2013 at 6:51
  • $\begingroup$ @Vibert: That's what I thought. But $U$ matrices map the states $\psi$ to Lorentz-transformed states, so then it should be the $C_{\sigma \sigma'}$ matrices that furnish a representation of the Lorentz group. I'm confused why Weinberg says that the states $\psi$ are the ones furnishing such a representation. (See the edited question) $\endgroup$
    – 1989189198
    Commented May 26, 2013 at 5:14
  • $\begingroup$ OK, I see, it's a matter of language. Formally a representation is a linear map from the group to your vector space, so in this case the map $W \mapsto D(W).$ But when you use this construction, of course it depends on both the cases $\psi$ and the Lorentz matrices acting on them. That's why in physics we use the term representation in a sloppier way than our mathematician friends. $\endgroup$
    – Vibert
    Commented May 26, 2013 at 7:02

2 Answers 2

1
$\begingroup$

Re the meaning of representation, here is a definition from Peter Woit's "Quantum Mechanics for Mathematicians" lecture notes (available on-line), section 1.3:

Definition (Representation). A (complex) representation ($\pi, V$) of a group $G$ is a homomorphism $$ \pi: g \in G \rightarrow \pi(g) \in GL(V) $$ where $GL(V)$ is the group of invertible linear maps $V \rightarrow V$, with $V$ a complex vector space.

Saying a map is a homomorphism means $$ \pi(g_1) \pi(g_2) = \pi(g_1g_2) $$ When $V$ is finite dimensional and we have chosen a basis of $V$, then we have an identification of linear maps and matrices $$ GL(V) \simeq GL(n,\boldsymbol{C}) $$ where $GL(n,\boldsymbol{C})$ is the group of invertible $n$ by $n$ complex matrices.

So the representation is the homomorphism (the operation-preserving map) from the group $U(\Lambda)$ to the transformation matrices (Weinberg's C's and D's), but these matrices require a vector space (the $\psi$s), on which to act.


For the rest, here's my answer (caveat emptor, I'm just a slow student):

This section 2.5 is titled "One Particle States". If $C$ turns out to be reducible (block-diagonalizable), the different blocks are independent of one another (no mixing between blocks) and are interpreted as different particles species. So, for a single particle state a single irreducible block is assumed.

In this argument it's OK to generalize from homogeneous to inhomogeneous transformations, because translations don't mix $\sigma$'s and hence don't affect the block structure of $C$:

$$U(1,a) \Psi_{p,\sigma} = e^{-ip\cdot a} \Psi_{p,\sigma} $$

Finally, in the case you posit of a completely diagonal $C$, I think you are left with a bunch of particle species with no $\sigma$-mixing at all, i.e. scalars, each with a trivial little group ($k=1$).

$\endgroup$
1
$\begingroup$

In the inhomogenous Lorentz group $ISO(1,3)$, you have the space-time translation group $\mathbb{R}^{1,3}$, and the Lorentz group $SO(1,3)$.

You begin to find a representation of the space-time translation group, by choosing a momentum $p$. So your representation must have a $p$ index,

$$\psi_p \, .$$

After this, you will have to get the full representation, by finding a representation of the Lorentz group compatible with the momentum $p$, this will add another index $\sigma$ which corresponds to the polarization, so you will have a representation,

$$\psi_{p, \sigma} \, ,$$

which is the representation of the inhomogenous Lorentz group.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.