0
$\begingroup$

I always assumed tension is uniform in a wave but i saw a question in which we had to form an equation for tension at different position and time. The answer given was $$ T \sqrt{ 1+\left(\frac{\partial y}{\partial x}\right)^2 }.$$ Where $T$ I assume is the uniform tension which we usually talk about. Please help .Sorry if there is any problem with my query.

$\endgroup$
1

2 Answers 2

1
$\begingroup$

I think you are confusing the tension with the potential energy of a stretched string. If a string under tension $T$ is slighly stretched by a distance $dl$ the work done to stretch it is $Tdl$. This assumes that the change in length is small so that the change in $T$ due to the stretch is negligible (i.e of second order in $dl$). If the string, originally lying along the $x$, axis from $0$ to $L$, is bent so that its profile becomes $y(x)$ the change in length is $$ \delta L= \int_0^L \sqrt{1+\left(\frac {\partial y}{\partial x}\right)^2} dx- L $$ so the potential energy stored in the string is $$ T \delta L= \int_0^L T \left(\sqrt{1+\left(\frac {\partial y}{\partial x}\right)^2}-1\right) dx\\ \approx \int_0^L \frac 12 T \left(\frac {\partial y}{\partial x}\right)^2dx. $$ There are cases where we need to consider the change in $T$, but these require knowledge of the Young's modulus of the string, and this does not seem to be what you are asking about.

Note added. I just saw that I answered essentially the same quastion here. I am getting old. I have no recollection of this previous answer....

$\endgroup$
2
  • $\begingroup$ Thanks a lot for the answer but actually I am sure I was asked to make this equation for tension. I tried to reverse engineer this ans and it seems they have assumed that "T" is actually the horizontal component of the tension along the string and then solved for the Tension along the string. Does this make any sense according to you? $\endgroup$ Commented Dec 29, 2021 at 14:32
  • $\begingroup$ No it does not make much sense. Where did you find this claim? $\endgroup$
    – mike stone
    Commented Dec 29, 2021 at 16:45
0
$\begingroup$

If you multiply your expression by dx/dx, it can be expresed as T(ds/dx) where the (ds) is then length of a short segment after it is tilted. This implies that the tension in each segment is proportional to the length of the segment (which is not true).

$\endgroup$
2
  • $\begingroup$ Wouldn't the expression T(ds/dx) just imply that we are solving for the orginal tension along the string and T is just the horizontal component of the tension along the string. $\endgroup$ Commented Dec 29, 2021 at 15:02
  • $\begingroup$ I would agree with Mke Stone that relating the tension to the stretch requires the use of Young's modulus. $\endgroup$
    – R.W. Bird
    Commented Dec 30, 2021 at 15:56

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.