Dielectric permittivity

Question

I recently learned about the dielectric that is used between the plates of a capacitor. If $E_0$ is electric field between the plates of capacitor in free space and $E_i$ is electric field due to induced charge in a dielectric after it is inserted inside the capacitor, (Let the dielectric constant be $K$) It is known that electric field becomes $\dfrac{E_0}{K}$. That is,

$$\frac{E_0}{K} = E_0 - E_i$$

Now from where I studied it, they use $\sigma_i$ as charge density of induced charge. And write $E_i=\dfrac{ \sigma_i}{\epsilon_0}$

$\epsilon_0$ being the permittivity of free space. What I don't get is why use the permittivity of free space instead of permittivity of dielectric material? After all, the electric field inside the dielectric is being calculated.

So I went to MIT 802 Walter Lewin's lectures and this is what I got.

https://youtu.be/GAtAG938AQc?t=170

He also uses $\epsilon_0$

Why is it that we not use the permittivity of dielectric medium?

Answer 1

You do this one of the two ways, you don't both take into count the induced electric field of the dielectric and use the permittivity of the dielectric. Think of it in this way, writing out the permittivity of the dielectric or writing a dielectric constant is an easy, express way to define the counter-effect the dielectric has on the external electric field passing through it. So in the 'base' calculation, you subtract the two electric fields, every other way to write it follows that calculation. Therefore using the dielectric permittivity in that case would be doing the same thing twice.

Answer 2

So I think I found the answer and I'll just post it here for future users who face the same problem. See the thing is the $K$ I've been treating all together as a new constant which is absolute for any given dielectric is NOT ANYTHING NEW! but it is the same thing as $\epsilon_r$ the relative permittivity! That is where the $\epsilon$ of the medium comes into play. $K$ is not absolute but relative to the permittivity of free space. Hell $$K= \frac{\epsilon_m}{\epsilon_0}$$

The electric field decreases as $E_m = \frac{E_0}{\epsilon_r}$

This is where $K$ comes from.

$E_m = \frac{E_0}{K}$

The gist is, you can write induced E field as follows

$$E_i= \frac{\sigma_i}{\epsilon_0} = \frac{\sigma_i \times K}{\epsilon_{medium}}$$

this link here has been useful.