# Questions tagged [statics]

Analysis of a system of bodies where all forces are in balance and there is no motion relative to a chosen reference frame.

422 questions
Filter by
Sorted by
Tagged with
546 views

### Sum of all Moments around an axis as a nonzero number in Statics [closed]

Good time of day, everyone! Here's one thing I can't quite grasp on. So given a Statics problem, I have: $ΣM_x = 159 \;\mathrm{N\cdot m} ≠ 0$; (Sum of all moments around x-axis equals 150 N•m) Now, ...
363 views

### Equilibrium of rigid body [closed]

A uniform beam $AB$ of length $2l$ rests with end $A$ in contact with rough horizontal ground. A point $C$ on the beam rests against a smooth support. $AC$ is of length $\frac{3l}{2}$ with $C$ higher ...
2k views

### Minimum force needed to keep the book from slipping?

I would just like to know if my answer to part C is correct because I am confident in parts a and b, Also note that 51.5N is the wrong value for P. P=515N. Ok so since P= normal force, this means ...
122 views

### Balancing Orthogonal Forces on 2D plane with arbitrary placement [closed]

I have a rectangular block in the xy plane with the center of mass that acts in the z direction at an arbitrary place in the plane. I also have 4 legs that support this weight underneath the block. ...
117 views

### Why is shear force indeterminate at a section where point load acts

Why is shear force indeterminate at a section where a point load acts, i understand it from the mathematical point of view, since the left and right hand limits would not agree and would lead to ...
252 views

### Stuck on certain types of static equilibrium problems [closed]

I'm not looking for a direct answer, more like something that can get me started. A lot of the other problems like this were easier, but I'm just lost. This concept seems really difficult to me in ...
654 views

### Why moment equilibrium must be calculated around the center in this problem?

Consider this problem, which ask for the value of the two normal forces (friction is negligible). Easy, right? You calculate the moments around G, the center of mass, and equate them to 0 (the object ...
109 views

### Rope tension definition

What is the exact definition of the tension of a rope? Here http://web.mit.edu/8.01t/www/materials/modules/chapter08.pdf the following definition is given The tension $T(x)$ in a rope at a ...
708 views

### I need help with determining angles after shifting of axis in Free Body Diagrams

I can't figure out by which property of the triangle the angles in shifted axis are also 30 degrees. Vertical angle theorom doesn't work. I drew it again and again. If someone could draw me a diagram, ...
476 views

### Stuck on a static equilibrium problem [closed]

This is the problem: "The figure below shows a 25-foot sailboat. The mast is a uniform 119-kg pole that is supported on the deck and held fore and aft by wires as shown. The tension in the forestay (...
47 views

### How would you get the velocity in this problem? (and what did I do wrong) [closed]

This problem is supposed to be solved by using the conservation of energy but I do not really know how to solve it that way.
58 views

### What component of the payload appears on the cross member? [closed]

I have a set of DIY steps; I've modelled it as the steps themselves "s", a short vertical support "a", a long vertical support "b" and a cross-member "c". Here's a picture: Just to be sure I modelled ...
697 views

### Draw the Free Body Diagram

Question: Draw the Reaction Force at point P. My Attempt and Reasoning: Since the Reaction or the Normal Force is normal to the surface the solution according to me should be- However, the correct ...
188 views

### Basic tension and equilibrium confusion

The following is what I did: $$Fsin\theta = 60 => F = 93 N$$ $$Fcos\theta = 40 => F = 52 N$$ Why do I get different results? Does this mean the object isn't in equilibrium? How can I proceed ...
306 views

I completely disagree with the following calculations: Based on my understanding, there is no force either internal or external applied to the Green bar, so it should be 0N. The reaction (internal) ...
151 views

### Why curvatures relieve stress?

Per example, we can stop a crack in a steel plate by drilling a hole at the end of it. Or we all know the famous example of popular science that airplane windows are round for the same reasons. Why ...
1k views

### Mass required to prevent sign falling over with a set wind load - activity stations for disabled children

I'm currently working on my thesis and I'm stuck on a question. I'm designing activity stations for disabled children to be used for equine therapy. The stand is 9ft tall and I've calculated the the ...
2k views

### The Physics Behind the American Death Triangle [closed]

I've heard a lot about the American Death Triangle and how it is awful for belaying. The Death Triangle is set up as such: you have two anchor points with a single rope or line running through both ...
1k views

### Calculating force with two fulcrums and many forces [closed]

I may not be wording the question the right way. I have a lever. About 2/3 the way back there is a pivot point. We'll call this B On the very front (end of the lever) there is a block that the lever ...
1k views

### Do supports exert torque?

I think I'm missing something about torques. Do supports exert torques? Consider these two situations I'm confused about. A rod is attached in to a wall so that it cannot rotate. Since weight exerts ...
476 views

### What are the clicking sounds when static electricity occurs?

Sometimes, when there's static electricity, soft clicking sounds can be heard. This may happen when two fabrics are rubbed or when you get a static shock. What exactly causes this sounds?
87 views

### What way did this person solve the problem? [closed]

Im curious, I have no idea how they solved the problem to get from the unitary vector to the Moment/Tension. How did they managed to get it so reduced? What steps did they perform in the blue part?
567 views

### Maximum Load of a Crane before Car will Tip

Imagine a car with a crane. In scenario 1, the tension on the crane cable by the load points straight down, ie, perpendicular to the ground. In scenario 2, the tension on the crane cable by the ...
174 views

### Interpreting force components in statics problems involving inclined planes or similar

I'm having troubles to understand how to interpret the components of forces on inclined plane in quite complicated situations. I will make an example of one of the cases where I get confused. ...
2k views

### Angles in a static equilibrium

I have three masses $\left(F_\alpha, \, F_\beta , \, \text{and} \,F_g \right)$ with 2 pulleys, and a wind variable which is in static equilibrium. I have already calculated the appropriate forces for ...
102 views

### Homework Question: Moments [closed]

Can someone please explain this question? My work: If we take B to be the pivot then as B gets closer to mg the torque due to mg gets smaller, but I don't really see how this affects the force F (I ...
15k views

### Calculating the tipping point of a lamp post

So I'm designing an outdoor lamp post and trying to calculate whether it will withstand the heavy winds at the worst case scenario. Here are the parameters and what I've done so far: The lamp post is ...
162 views

### Laws and Intuition for physical problems

So I've been reading the book 'Feynman: Tips on Physics' recently and in chapter 2 (the book is available for free online) he works out the answer for this problem using his intuition rather than ...
20k views

### Determine resultant couple moment by summing moments

The question states: Determine the resultant couple moment by (a) summing moments about point $O$ and (b) summing the moments about point $A$. I used scalar analysis for solving this ...
2k views

71 views

### I'm building a bubble pane. What can I do to reduce static pressure? [closed]

I'm building a bubble pane, just for decoration in my home, using some patio door glass panes and an aquarium air pump. Soon into my testing, I learned what static pressure is. When I fill it up, even ...
62 views

### Distortion of non-circular cross sections upon torsion

True or false? Non-circular cross sections can be non-planar when torsion is applied. This was on a quiz today and I wasn't sure of the answer. I guessed true by intuition, but does anyone have a ...