# Questions tagged [friction]

The resistance a surface or object encounters when moving over another.

1,642 questions
Filter by
Sorted by
Tagged with
3k views

### Friction on a conveyor belt

I was surfing through an Olympiad paper and I was caught with this question. A block of mass 1 kg is stationary with respect to a conveyor belt that is accelerating with $1\, \tfrac{m}{s^2}$ ...
8k views

### Coefficients of friction for steel, aluminum & polymers

I am trying to analyse the problem of sticking an aluminum piece to a stainless steel piece only with pressure. The holding capacity of the system is determined by the static friction between the two ...
4k views

### Work done by Static friction

Here $v1$ is relative to the block on which sphere is pure rolling but static friction isn't $0$ as of now . In the following diagram, is work done by static friction $0$ ?, since the point of ...
5k views

### Angular momentum conservation while internal frictional torque is present

So this appears in a problem which looks simple enough in its context; It's something like this: Two discs, A and B, are mounted coaxially on a vertical axle. The discs have moments of inertia $I$ ...
2k views

### Angular momentum after elastic collision

If two balls collide (elastically) and there is no friction between them, will their angular momentum change after the collision?
345 views

### Are there real life applications for Hausdorff dimensions, specifically crack formations?

I was curios about Hausdorff dimensions. They seem to neatly describe rough surfaces. So I was wondering if there are common applications of Hausdorff dimensions in things like complicated friction ...
1k views

### How does the resistance force on a rolling ball depend on the ball radius?

A billiard ball set gently rolling on a billiard table slows and stops, because it is decelerated by resistance forces at the contact between the ball and table. I expect the magnitude of the ...
411 views

### What is $\gamma$ in the damping equation?

$x''+\gamma x'+w_0^2x=0$ That is the general equation for damped harmonic motion. What is the term or name that describes $\gamma$? Is it called the damping constant? I know its the ration between ...
61 views

### Does friction depend on the area between bodies thats in contact? [duplicate]

Does friction depend on the area between bodies thats in contact? If yes why we make threads on vehicles tires and below shoes? Does it not cause reduce in friction?
8k views

### Why is the damping force on a spring oscillator linearly dependent on velocity?

If you consider the damping force is friction like in: then the force should be $$F=\mu N$$ where $\mu$ is the coefficient of kinetic friction. Why then is the damping force assumed to be linearly ...
789 views

### Smallest force to move a brick

Having a brick lying on a table, I can exert horizontal force equal to $\mu m g$ to a middle of it's side, and it will start moving (assume $\mu$ is the friction coefficient). However, can I make the ...
3k views

### Is the wind's force on a stationary object proportional to $v^2$?

I am on a boat docked at Cape Charles, VA, about 30 or 40 miles from the center of Hurricane Irene. This understandably got me thinking about the force of wind on the boat. Since air friction is ...
576 views

### Why did increasing the Ackermann geometry in my race car make it faster in corners?

Ackermann geometry is used to account for the different radius arcs that the front tires follow when the steering wheel is turned from center. It's often expressed as a percentage: e.g. 25% Ackermann, ...
2k views

### Can I survive a free fall using a ramp and a rope?

Can I survive a free fall by carrying a very light and resistant ramp using a rope? Note: lets assume the ramp is a little bit heavier at the bottom and I am very skilled at making it always land ...
576 views

### calculating work done by friction

I want to calculate the work done by friction if the length $L$ of uniform rope on the table slides off. There is friction between the cord and the table with coefficient of kinetic friction $\mu_k$. ...
283 views

### Hyperbolic, parabolic, elliptical PDE related to under-, critical- and overdamped in harmonic osciallation

A damped harmonic oscillator has three cases for the damping: underdamped, critically damped and overdamped. With partial differential equations, I know the hyperbolic wave equation, the parabolic ...
818 views

### A very elementary question regarding force of friction

When I first studied friction I faced f = $\mu$ N where f is force of friction, $\mu$ is coefficient of friction for the surface considered and N is the normal force for the body on surface. Now f is ...
258 views

### friction on atomic scale

I am getting into friction on an atomic scale. For instance, take two rigid layers of atoms of the kind A that are placed on top of each other, just like putting two boards of wood on top of each ...
6k views

### Will two trains running along the equator in opposite direction experience same wear out?

Two identical trains, at the equator start travelling round the world in opposite directions. They start together, run at the same speed and are on different tracks. Which train will wear out its ...
19k views

### Torque Required For a Motor to Move an Object on Wheels?

I've been attempting to calculate how much torque a motor needs to produce in order to start a stationary object on wheels moving. (The torque is being applied to the rear 2 wheels, the front 2 are on ...
131 views

### Car tires wearing in dependence on breaking system

Lets say I have two cars. They are identical in every way, except that Car A has a normal breaking system, where most of the breaking power is inflicted on the front wheels, and some on the back, and ...
291 views

### Which theory predicts that dubbed tires have more friction?

The physical reasoning I suppose could be that more contact areas mean more and higher friction. But is there an actual formula or a more mathematical explanation? Application for bicycling was my ...
2k views

### What is a natural movement of a ball on a upward curve (the two arrow lines pointing upward) given no external force?

If you drop a ball down a upward curving parabolic ramp, what is the expected movement of the ball? Assume the ball is set into motion with no external force. Would it go all the way from point A to ...
1k views

### How would you use the Euler-Lagrange equation to predict the motion of projectiles with linear (Stokes) drag (but no wind)?

My first instinct would be to use the force $$\vec{F} =- \alpha \vec{v}$$ and therefore V(\vec{r}) = \alpha \int_C \vec{v}\cdot d\vec{s} = \alpha \int_C \vec{v}\cdot \vec{v} dt = \alpha \int_C ...
5k views

### Investigating damped Harmonic Motion in a Spring?

I'm going to conduct an investigation into the dampening of a spring. Essentially, what specific factors could be investigated? Currently I'm planning to investigate the effect of changing the mass ...
1k views

### How can a vertical force cause motion at an angle?

I just started learning physics 3 days ago and am having trouble understanding what I am doing wrong. Can someone please explain my error(s)? Thanks! We have a 1kg object on a plane at a 30 degree ...
685 views

### Why does my bicycle brakes squeak in the morning?

Every morning, when I ride my bicycle, there is a very loud squeak coming from the brakes. I have an aluminum rim (I think that they are of the sprint type) and rubber pad brakes. A couple of brake ...
5k views

### Direction of friction on particle placed on a rotating turntable

If a particle is placed on a rotating turntable then the particle has a tendency to slip tangentially with respect to the underneath surface... So the friction should act tangentially to the particle.....
4k views

### How do I account for the direction of friction acting on a spring?

I would like to set up the equations of motion for a simple spring oscillator. Let's have a spring lying horizontally; we attach a small mass $m$ to the (massless) spring. The force of the spring ...
2k views

### Rolling (without slipping) ball on a moving surface

I've been looking at examples of a ball rolling without slipping down an inclined surface. What happens if the incline angle changes as the ball is rolling? More precisely I've been trying to find ...
43 views

### Rolling (without slipping) ball on a moving surface 2 [duplicate]

Possible Duplicate: Rolling (without slipping) ball on a moving surface Apparently I didn't log in properly when I asked a question this morning: Rolling (without slipping) ball on a moving ...
1k views

### What is the angle of the string with the vertical?

A heavy uniform sphere of radius $a$ has a light inextensible string attached to a point on its surface. The other end of the string is fixed to a point on a rough vertical wall. The sphere rests ...
139 views

### Energy problem: What's wrong here?

A car ($m=540\,\text{kg}$) engine, has a power of $60\,\text{kW}$. The static friction coefficient between wheels and road is $k=0.6$. How long does it take to reach the speed of $27.7\,\text{m/s}$, ...
3k views

### What is the force of friction between two bodies given their masses and a force pulling them as a unit accross a surface?

Where a force of 200N pulls two blocks together(as one system) across a horizontal table top(µ=0.800) $m_A$ = 5.00kg, $m_B$ = 10.0kg Find the acceleration of the system. Find f$_k$ between B and A ...
200 views

### Boy and box on ice

I have a troubles. Can you help me? I have a task, called "slippery activity". Boy (he has $m=45kg$) Stands at ice and tries to move a big box ($M=90kg$) with a string (rope). Boy's Slip ratio is 0....
21k views

### How does rubbing cause the transfer of electrons from one object to the other? [duplicate]

I have just learnt about electrostatics. Why would there be a transfer of electrons? Is it because of the difference of the materials (i.e. triboelectric series)? So in the case of two different ...
272 views

### Understanding Work and the conservation of energy

We have a car with a mass of $780 kg$ with travels with a speed of $50 km/h$. The car brakes and after $4,2m$ is stops completely. Warmth is created. Calculate the friction. I solved this easily, by ...
6k views

### Conservation of energy in objects at terminal velocities

In vacuum, object free falling under gravity, the sum of Gravitational Potential Energy(GPE) and Kinetic Energy (KE) is a constant. The GPE is a decreasing side of a quadratic and KE is a increasing ...
732 views

### Moving along friction surfaces

If a particle moves along a one dimensional surface with constant friction. As the particle moves from point $A$ to point $B$ it loses an amount of energy equals $E(A,B)$. Consider that the particle ...
110 views

### Why do bigger tires = more friction? [duplicate]

Possible Duplicate: Why do people recommend wider tyres in car for better road grip? Static/kinetic friction says that the friction force is proportional to the normal force, via the coefficient ...
2k views

### Is gecko-like friction Coulombic? What is the highest known Coulombic $\mu_s$ for any combination of surfaces?

Materials with large coefficients of static friction would be cool and useful. Rubber on rough surfaces typically has $\mu_s\sim1-2$. When people talk about examples with very high friction, often ...
499 views

### Does air resistance ever slow a particle down to zero velocity?

If a particle moves in a place with air resistance (but no other forces), will it ever reach a zero velocity in finite time? The air resistance is proportional to some power of velocity - $v^\alpha$, ...
157 views

### Beer bottle leftovers pour quickly only after waiting?

Why is it that after pouring a delicious beer from a bottle, I can hold it upside down for several seconds without reward, but if I wait a bit, the remainder presumably settles at the bottom and ...
8k views

### Is it possible to find out the distance traveled by a car if the force applied on it is given?

Say you have car which produces $F$ amount of force which is transferred to the wheels directly. Now assuming that there is air friction which is causing a retarding force proportional to the ...
1k views

### Overcoming Friction

Let's say a box is moved by attaching a rope to it and pulling with an applied force at a certain angle. Now, let's say that this is being done on an inclined ramp. How would I find the acceleration? ...
591 views

### What controls whether a ball will skid or roll?

A billard ball is struck with a cue. The line of action of the applied impulse is horizontal and passes through the center of the ball. The initial velocity $v_0$ of the ball, its radius $R$, its mass ...
679 views

### Friction between atoms in spring

if i doing experiment on spring-mass system in vaccum,if i pull the to some extent (within elastic limit of spring) & let it go,will the system oscillate indefinitely? (neglect contact frictions ...
2k views

### Force applied perpendicular to direction of motion, static or kinetic friction?

Let's assume we have a 1 kg cube on a flat uniform surface. The coefficients of friction between them are $\mu_k = 0.25$ and $\mu_s = 0.50$. This cube is moving at 1 m/s in the y direction, with ...