Questions tagged [batteries]

Devices to store chemical energy and convert it to electrical energy.

Filter by
Sorted by
Tagged with
0
votes
2answers
68 views

Work done by battery?

Why the work done by a battery is Q*V where V is emf of battery and Q is charge that is made to flow in circuit?please explain detail? explain and write the formulas
1
vote
5answers
94 views

Why does the potential difference across a type of parallel circuit not act like a potential divider? [closed]

Image credit (Q3) In this attached circuit, when $R_1=0\Omega$, I am failing to understand how the two cells affect the potential difference across the central resistor R3. I understand that ...
7
votes
4answers
1k views

Why is there no current between two capacitors connected in series?

I want to ask a question about the figure below. Why the current does not flow from $-Q$ term to $+Q$ term or from a to b since there is a voltage?
0
votes
1answer
31 views

When the external resistor increases in temperature, why is the calculated value for internal resistance higher?

Say we had a circuit with a cell (with internal resistance)and an external resistor of 10 ohms as shown: The 10 ohm resistor then increases in temperature, leading to an increase in resistance in ...
0
votes
3answers
77 views

Voltmeter reads zero with two same batteries connected in series [closed]

this is an a level physics question, can someone here please explain why voltmeter reads zero and how changing resistance of variable resistor effects voltmeter reading. The main concept i want to ...
5
votes
4answers
3k views

Charging of a battery

A battery has an Emf 6 Volts. It is completely discharged. It is charged by maintaining a potential difference of 9 Volts across it. If the internal resistance of the discharged battery is 10 ohms, ...
1
vote
1answer
68 views

Does the voltage of the battery change if you use it? [closed]

If you use the battery to charge a capacitor does the voltage of the battery decrease or still the same? Does the voltage of a capacitor decrease if you use it to charge another capacitor?
17
votes
3answers
254 views

Theoretical physics for better batteries?

It is Earth day, so I started thinking about the theoretical physics problems that could help reduce greenhouse-gas emissions and fight climate change. We actually have a reasonable range of ways to ...
0
votes
2answers
59 views

Kinetic energy and current

When a battery is connected to a resistance circuit, we know that it loses energy because heat is emitted as a result of the collisions between the electrons and stuff, but my question is, is the ...
0
votes
4answers
66 views

Finding the charge on a capacitor (RC circuit)

I am having trouble finding the charge on the capacitor for $t\rightarrow \infty$ after the switch has been closed at $t=0$. I already know the current $I$. I also have to find out on which sides the ...
2
votes
1answer
102 views

Resistors parallel to short circuit

I have a trouble solving this problem. (Actually, each resistor is not parallel with the bottom wire since the voltage across each of them is different with that of wire.) In the manual, the bottom ...
0
votes
1answer
190 views

What do we mean by positive terminal and negative terminal?

What do we mean by positive terminal and negative terminal of battery ? What is the electric potential of both positive terminal and negative terminal ? Does positive terminal mean positive electric ...
1
vote
1answer
118 views

Battery operation, charge and discharge processes misconceptions

I'm trying to elaborate a simple and concise explanation (and conceptually correct) of how a battery charges and discharges, and why we say things like "the charge stored in the battery is x Ah". For ...
0
votes
1answer
105 views

Would Kirchhoff’s rules not hold in this circuit?

On my E&M test I was given the circuit diagram below and asked to find the charge on the capacitor after a long time or as $ t \to \infty $. In class we had used Kirchhoff’s voltage rule on the ...
0
votes
1answer
61 views

How do electrons gain energy in a cell?

When electrons reach the positive terminal, how does the cell do work on them? I’ve read in a book that states voltage is literally the push that the cell exerts on electrons, which thus does work on ...
0
votes
0answers
48 views

Calculating energy capacity of a battery

I understand that you can easily calculate the energy capacity of a battery simply by multiplying the mAh rating by the Voltage. However, my question is how do the manufacturers calculate the mAh ...
6
votes
1answer
148 views

Nernst Equation and Energy

I have a question regarding the Nernst equation and energy in a system. I know this is also a chemistry question, but I was interested in the thermodynamics (the energy of a system), so I decided to ...
0
votes
0answers
36 views

How to choose the method of circuit analysis?

I was just doing some revision, and I was wondering how to figure out which method to use for solving a given circuit? I tried using mesh analysis on the attached circuit but I got it completely wrong....
1
vote
1answer
55 views

Does Stopping Voltage actually produce 0 photocurrent?

The stopping voltage is the voltage applied across the photoelectric plates to measure the maximum KE of ejected electrons. This is as the electric field will apply a force against the velocity of the ...
0
votes
0answers
27 views

Question about amp-hour and batteries in series

I am a little confused about this wiring batteries in series and parallel and the effect of this on total time that these batteries can last(I suppose this is called amp-hour, correct me if I'm wrong) ...
1
vote
1answer
106 views

Different batteries in a parallel circuit

I have come across this question in my physics textbook. Two batteries are connected in parallel to a resistor (see the above image). The first battery generates $U1 = 9V$ of voltage and its internal ...
1
vote
3answers
108 views

RC circuit discharge while being connected to a battery?

I am facing a conceptual problem in analyzing the following situation which was part of a physics exam; A series RC circuit with $R = 200k \Omega$ and $C = 10 \mu F$ is connected to a 5V battery and ...
1
vote
2answers
195 views

What happens when a battery is dead?

While studying circuits I am having a question that when we say a battery is dead.Do we mean that the voltage difference between the ends has become zero?If no,then what actually happens?
4
votes
5answers
1k views

Why does not a battery kept in empty space discharge on its own? If space between the terminals is empty, what prevents the electrons to flow?

Given here is the picture of a twisted battery kept in free space (vacuum). Will the battery discharge quickly? I mean, it should discharge faster than it would if we were to connect the terminals ...
0
votes
3answers
83 views

Practical usage of batteries connected in parallel

Is there any practical usage in real devices for connecting batteries in parallel? Or is it more a theoretical construct? It seems to me that only batteries in series are used nowdays.
-1
votes
3answers
75 views

Can anyone tell me why the answer to this question is D? [closed]

I think the current will go through earth wire but my physics teacher told us the current will continue to flow through the circuit.
0
votes
2answers
45 views

Empty and fresh battery in series

If you have 2 (e.g. 1.5V) batteries in series and one is dead/empty, what is the reason why a device is not working? Lack of voltage (1.5 + 0 is simply not enough for the device to operate)? From my ...
1
vote
2answers
57 views

Why did a 12V battery affect my motor more than two 9v batteries in series?

In class, we made a coil of wire and used it to make a simple electric motor with a magnet. I put two square 9v batteries in series for a total of 18v to power the motor. I then used a larger 12v ...
2
votes
1answer
86 views

Doubt while simulating electric circuits

Today, I was simulating DC electric circuits just for knowledge and fun using PhET interactive simulations. But I'm having trouble understanding these circuits which I made. I think that both these ...
2
votes
2answers
40 views

For a real battery, why is two identical bulbs in parrallel slightly more dim than just one in series

Image for reference: $$\begin{align} &r = 0.8\,\Omega\\ &\mathscr{E} = 1.5\,\mathrm V\\ &A = B = 6\,\Omega. \end{align}$$ The current when the switch is open, the only other resistor is ...
1
vote
1answer
59 views

Why do we subtract the voltage of the resistor from the emf voltage to find the terminal voltage?

I attached an image of a question from homework. I calculated the current in step 1) and then I calculated the voltage of the resistor. But why do I need to subtract that voltage from the emf voltage ...
-1
votes
1answer
31 views

Direct current electric circuit

Why when I reverse one of the three batteries in a torch light, the bulb does not light up? The three batteries (one of them is reversed) and the bulb suppose to form a closed loop. According to ...
1
vote
1answer
22 views

Question about electrochemical reaction in fuel cell

The electrochemical reaction on the anode side of a fuel cell can be expressed as hydrogen split into hydrogen protons and electrons. I'm doing some research about the electrochemical reaction in a ...
1
vote
2answers
58 views

Voltage when lamp burns out [closed]

In the question below, shouldn't the voltmeter read zero V because the circuit is broken and there is no current flowing? (the answer in the text is 12v)
0
votes
3answers
152 views

Why doesn't the flow electrons occur in a broken circuit?

Take a battery and connect a small led bulb across it with the help of two wires. The bulb will glow, but if I cut a small piece of wire from any part of the connecting wires,the circuit will not work ...
0
votes
1answer
61 views

Intuition behind swapping the known and unknown resistance in a slide wire meter bridge

Today I was learning about wheatstones and balanced meter bridges. But while learning about the sources of error while working with the meter bridge (measuring unknown resistance), I couldn't ...
3
votes
2answers
219 views

How do voltmeters measure work done over a component?

In my physics class, we were shown the picture below to measure the current and potential difference through a component. We were told that the resistance of the ammeter is as low as possible, and the ...
3
votes
1answer
1k views

Why would 4 batteries in a device not drain equally? [closed]

I noticed a motion sensor light was weak so I assumed the batteries were dying and removed them. To make sure I was right, I tested the 4 D alkaline batteries. One was completely dead. One was on the ...
0
votes
2answers
57 views

Power in a simple electrical circuit [closed]

In this picture, as we know power due to heating of the resistance is $V^2/R$ . Now, if we add a parallel resistance to the circuit, the power dissipated through this resistor is also $V^2/R$ ...
3
votes
6answers
2k views

Does the resistance of the voltmeter affect the behavior of this circuit?

I have this setup. It consists of a battery of no internal resistance with voltage $V$ and a resistor with resistance $R$. It also consists of a voltmeter of some (not so large) resistance as good ...
0
votes
1answer
180 views

Li-ion Battery charging

Why are constant current mode and constant voltage mode needed when charging Li-ion batteries? Why do we apply saturation charge even after the cell voltage reaches 4.2V? What exactly is 'I-sense' in ...
-1
votes
2answers
91 views

Voltmeter connection across motor

I want to measure the voltage(potential difference) acorss the motor A. Where should I connect the voltmeter? I am confused between two possibilities: between X and Y (between two ends of the motor ...
0
votes
1answer
26 views

Uncertainty estimation of a quantity after its calibration

I have to calibrate power output of a diode to its input voltage. The voltage source has negligible error but the power meter has significant uncertainty (a couple %). I take a number of power ...
0
votes
5answers
154 views

Potential Difference of a battery - What does it mean?

I have studied current electricity for a while now. When I look back at basic concepts, I am quite clear about what current, electron, resistance is. But I cannot imagine about the potential ...
0
votes
3answers
974 views

Hardest circuit diagram [closed]

I have provided an example of the type of problem I am having issues with. In the given diagram, the resistances and batteries are identical and the batteries do not have internal resistances(for the ...
0
votes
0answers
27 views

Electronegative - Electropositive atoms can attract ions?

Well I was just wondering how a copper-zinc battery works, with electrolyte an equilibrium of water and NaOH. It says that NaOH is dissolved (I understand that) into water forming H$_4$O$_8$Na+ ions ...
0
votes
2answers
59 views

Is (DC/battery) voltage a result of charge? or energy? or both?

Backstory: I’m a software engineer just getting into electronics and it seems that everything I’ve ever been told about electricity my whole life is a candy-coated lie. I can’t find consistent logical ...
2
votes
4answers
140 views

How does resistance *really* work? (DC, battery, LED, atoms, electrons)

Backstory: I’m a software engineer just getting into electronics and it seems that everything I’ve ever been told about electricity my whole life is a candy-coated lie. I can’t find consistent logical ...
4
votes
3answers
8k views

How can you calculate (or convert) the Wh of a capacitor whose energy is given in Farads

When trying to compare the energy in a battery to the energy in a capacitor, the units don't match up. How can one compare a battery whose Ah are 10 and Voltage is 3 (for a total of 30 Wh) to a ...
1
vote
1answer
45 views

What is difference between current and voltage? [closed]

If current passes through the bulb not using it up then how battery becomes weak after sometime?