32k views

### Does current flow back to the source through earth?

We know that if Single Line to Fault occurs, then fault current flows to the earth. I want to know whether the current will return to the source or not. For the current to flow we need a closed path. ...
4k views

### Why electrons flow through a wire connected to a battery?

I would like to know why does electrons flow through a wire connected to a battery as said in AC/DC: What's the Difference?.It tells that "the electrons that are stripped from the carbon electrode is ...
6k views

### How “earthing” electricity work?

I made a simple bulb-battery circuit and then I cut one of the wires and attached both ends to cemented floor, the bulb didn't glow, this means cemented floor is a ...
2k views

### How does AC current flow in an open circuit?

In common house hold wiring we have the hot lead, neutral and ground. If the hot lead in electrical wiring contacts earth ground (perhaps though a short circuit in the chassis of a device) then the ...
1k views

### If I switch on a generator connected to an open circuit, are the charges oscillating along wires?

If I switch on a generator connected to an open circuit, are the charges oscillating along wires? Where has the energy gone in the open circuit?
628 views

### Transmit DC power with one cord?

My DC devices have two wires connecting them to the power source, but what would be needed to transfer DC power using just one? I depict it as a kind of headphone, which can work with just one wire.
242 views

### Maxwell's Theory Of Wave Propagation [closed]

What is Maxwell's theory of Wave propagation and what is its physical interpretation?
359 views

### Inductor rise time and inductor wire length

So here is an interesting question about inductors or coils in general. Suppose you had a inductor which was 12 inch's in diameter and say 12 inch's in length and has 100 turns of wire. The total ...
Suppose that we have a charged capacitor with two pins: $C_+$ and $C_-$. Suppose that we have a long wire with fixed geometry, that is already connected to the pin C+. Let the ...
$$\oint B.dl = \mu_0\left(I+\epsilon_0\frac{\partial\Phi_E}{\partial t}\right)$$ Please explain the applications , and implications of the modified Ampere's circuital law with Maxwell's addition. ...