6
$\begingroup$

How do you know when to use the Boltzmann distribution for a particular problem?

I have many polymers connected together in many different possibilities by connector agents. All are in a solvent. I wrote the partition function of the system and used the Boltzmann distribution, with the chemical potential. However, some problems do not require it. How do you identify the situations that do require the chemical potential?

$\endgroup$
  • $\begingroup$ Just curious -- where does the phrase "connector agent" come from? I've never heard it before but I like it. $\endgroup$ – Praxeolitic Feb 4 '15 at 2:07
11
$\begingroup$

The distribution you use depends on the ''ensemble'' you are working in. There are three kinds of ensembles:

  1. Microcanonical ensemble (or practical: an isolated system): the number of particles $N_s$ and the energy $E_s$ is fixed. This is ONE SPECIFIC REALISATION of the system. You have only one possible value for the energy and number of particles, so the chance of having $N_s$ particles and a total energy of $E_s$ equals one. The number of elements in the microcanonical ensemble is often denoted as $\Omega_{\text{micro}}(E_s,N_s)$, which is the set of all states containing $E_s$ energy and $N_s$ particles.
  2. Canonical ensemble (or practical: closed system): the number of particles $N_s$ is fixed, but the system can exchange energy! So this ensemble contains all of the possible elements of the microcanonical ensemble with $N_s$ particles. This means that every posible value for the energy is possible. The probability of finding the system in a state with energy $E_s$ is given by the Boltzmann-distribution $$P(E)=\frac{1}{\mathcal{Z}}\exp\left(-\frac{E}{k_BT}\right),$$ where $\mathcal{Z}$ is the sum of states (or partition function). The number of elements in the canonical ensemble is often denoted as:$$\Omega_{\text{can}}(N_s)=\sum\limits_{E_s} \Omega_{\text{micro}}(E_s,N_s)$$
  3. Grand canonical ensemble (or practical: open system): the number of particles and energy can vary freely! Now since the number of particles isn't fixed, our entropy can change, adding or removing particles yields more or less possible microstates and hence another entropy. So we need to add a weight, which we call the chemical potential $\mu$, to this change in number of particles so that the change in entropy: $$\Delta S=\frac{\Delta E}{T}+\frac{p}{T}\Delta V-\frac{\mu}{T} \Delta N$$ is correct according to Boltzmann's formula, which basically tells us that: $$P(E,N)\sim \exp\left(\frac{S}{k_B}\right),$$ since the probability of finding the system is proportional to the number of possible microstates. Upon applying this principle we see that we need to add $-\mu\Delta N$ to the energy in the Boltzmann distribution. A trick to memorize this term (but is wrong since the term is due to entropy and not energy) is to say that a particle ''demands'' an energy of $\mu\Delta N$. The probability of finding the system in a state with energy $E$ and number of particles $N$ is given by: $$P(E,N)=\frac{1}{\Xi}\exp\left(-\frac{E-\mu N}{k_BT}\right),$$ where $\Xi$ is the grand canonical partition function. The number of elements in the grand canonical ensemble is also noted as $\Omega_{\text{Grand}}$.

So long story short, you only need the chemical potential when the number of particles is NOT fixed.

$\endgroup$
  • $\begingroup$ A wonderful and concise summary! PS Does your cat change his / her tie? $\endgroup$ – WetSavannaAnimal Feb 12 '14 at 22:57
  • $\begingroup$ No problem :). @WetSavannaAnimalakaRodVance sure he does, to bad he only has one kind of tie. $\endgroup$ – Nick Feb 13 '14 at 17:14
1
$\begingroup$

The chemical potential is needed if you have an open system, that is able to exchange matter with another system. For instance, when water condensates, the liquid phase can exchange matter with the gaseous phase.

In polymer solutions, one usually needs to take the chemical potential into account because the monomers can leave the polymer and create a monomer phase. Moreover, in your case you have the connecter agents that can attach and detach. If you have very few of them, they will prefer to remain free (to gain entropy), if you have a lot of them, they will be connected in great majority (to minimize energy). This shows that their action depends on their concentration, therefore you will need the chemical potential of the connecter agents in solution to solve your problem.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.