0
$\begingroup$

I am working on a Project and one of the major part of it is a GAS Detector, The GAS Detector detects the large number of flammable gases, but in order to test the Detector I am required to release certain gases in a room from the GAS cylinder with different flammable gases.

There is no such thing in a room which could cause ignition, still i wonder if the Static electricity produces in a room somehow, can it cause the fire or some harm due to this gases ??

Is there even the slightest possiblity that it could be harmful ? I just want to know if it may cause so that I could tell my Professors why I am testing the GAS sensor with the Hydrogen gas present in air.

$\endgroup$
  • $\begingroup$ This is hardly the sort of game to play in a "room." Either look up the gas density of e.g. hydrogen at which it becomes combustible, let alone explosive, or get yourself a proper safe test chamber. You really think a spark won't ignite an ignitable substance? $\endgroup$ – Carl Witthoft Jan 15 '14 at 17:55
  • 1
    $\begingroup$ @ Carl : maybe the op is asking what are the conditions which may cause the sparking ! $\endgroup$ – Rijul Gupta Jan 15 '14 at 18:13
  • $\begingroup$ @ Sufiyan : Why are you testing with $H_2$ ? $\endgroup$ – Rijul Gupta Jan 15 '14 at 18:14
  • $\begingroup$ @rijulgupta this is why i am testing with H2 (kindly see the answer here ) electronics.stackexchange.com/q/96092 the other reason is the other gases could be flammable. $\endgroup$ – Sufiyan Ghori Jan 15 '14 at 18:43
1
$\begingroup$

You are saying other gases could be flammable as if $H_2$ ins't !

Anyway I would sugggest you to take a solid metal drum, drill holes in it place the device such that its calibration modules stick out, seal it up, through some other hole insert a pipe to vacuum, through other hole insert pipe to fill $H_2$ seal that up too ! Seal everything ! create the vacuum , Fill the gas in tank and calibrate without hesitation.

What this method does is as there calibration will be done to as much $H_2$ as possible due to the vacuum created earlier it will be of better resolution. As you have sealed up all openings, no interference from outside medium. As it is a metal container, there will be no electric field inside as it will behave like faradays cage. No electric field means no interference with your device which may disturb calibration and/or cause sparking by interaction with your device or otherwise.

$\endgroup$
1
$\begingroup$

Yes, a spark from whatever source can ignite flammable gas.

If you are testing a detector for levels of gas so that you can calibrate it, it will be foolish to do this in a room with you inside.

As the comments suggest, create a special volume where you can safely control the density of the gas .

H2 is flammable too. The recommendation to use H2 is for consistency of calibration with the factory settings.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.