How is it that lead can block radiation, and things are lead lined. In the Indiana Jones 4 movie he climbs inside a lead-lined fridge and he somehow survives the blast and radiation?
1$\begingroup$ Have a look here: overthinkingit.com/2012/02/22/… for a scientific review of the "nuking the fridge" sequence. $\endgroup$– user23660Jan 14, 2014 at 13:00
$\begingroup$ Indy survives because MovieMagic, which has rather little to do with PhysicsReality. Now, the reason lead blocks some kinds of radiation is largely due to its density and atomic number (see wikipedia's "lead_shielding" entry). $\endgroup$– Carl WitthoftJan 14, 2014 at 13:04
$\begingroup$ Closely related: physics.stackexchange.com/questions/11506/… $\endgroup$– dmckee --- ex-moderator kittenJan 14, 2014 at 17:54
Lead is used to block radiation because:
- It is very dense. This means that the number of interactions that a radiation particle will undergo is higher over a fixed distance which causes the radiation to attenuate.
- It has a high proton number Z. This means that the charged radiation particles will scatter through large angles, also causing attenuation.
$\begingroup$ High Z means there is a high probability of photo-electric interaction for gamma rays: in that interaction, the incident photon is completely absorbed, not scattered. On the other hand, charged particles (alpha, beta, ions) get stopped over much smaller distances than gammas - so gammas (uncharged) and neutrons are the ones to worry about in a blast. Your answer seems incomplete (missing neutrons) and even inaccurate (the scatter cross section per unit mass is smaller for high Z materials - see Rutherford scatter formula ) $\endgroup$– FlorisAug 3, 2014 at 20:58
$\begingroup$ Im not sure if you're answer is completely accurate either - the nuclei are shielded by an electron cloud of equal charge to the nucleus (Z) so photons interact less strongly with the nucleus by a factor of 1/r compared the orbiting electrons. The photo-electric interaction is dominated by the density of the material (ie the density of electrons), not the proton number. In fact, in my answer I don't mention any probabilities or cross-sections. Furthermore I don't even refer to any specific particles, opting instead to keep the answer general. $\endgroup$– kd88Aug 4, 2014 at 15:58
Some additional information about shielding with high Z materials:
According to Table 3 in http://iopscience.iop.org/0022-3700/8/12/014/pdf/jbv8i12p2015.pdf, there is a strong relationship between the atomic number of a material, and the photoelectric cross section (the probability of a PE interaction).
Plotting the numbers for incident gammas of 25 keV, with the $Z^4$ on the X axis and the cross section (in barns) on the Y axis, gives the following plot:
As you can see, the $Z^4$ relationship works reasonably well (over this range of atomic numbers, from Carbon = 6 to Argon = 18).
This effect dominates the effectiveness of shielding materials in the range where photoelectric effects are important (roughly up to the binding energy of the innermost electrons). At higher energies, Compton scatter takes over - at that point, the electron density is the thing that matters (closely related to the density of the material - although hydrogen is an exception with roughly twice the number of electrons per unit mass compared to any other materials). Note that density and atomic number don't necessarily scale: tungsten has a lower Z than lead, but is much more dense. For my money, I will take 10 mm of tungsten shielding over 10 mm of lead shielding.
If you need a thin shield, there is nothing quite like density: lead, tungsten, gold, platinum, iridium... but of these lead is the cheapest by far (and easy to machine / mould). If you need a cheap shield, and size doesn't matter, then water is a much better bet (lots of electrons for very little money). This is why spent fuel is usually stored in pools of water (with the added benefit of cooling).
In an atomic blast, the gamma rays and neutrons are the thing to worry about. Lead is not a particularly effective neutron shield - light atoms are much better since the neutron will lose more energy in each collision (momentum transfer).
Ordinary people will not survive an atomic blast at close range because of a few mm of lead. But this is movie physics...