Let me use this paper as the reference for this.

I want to understand better the argument at the bottom of page 6.

If the bulk $AdS$ metric is written as $\frac{1}{r^2}(dr^2 + A(r)ds_{boundary}(x)^2)$ then the free massive scalars fields on it are of the form, $\phi = r^{\Delta_{+}}(\alpha(x)) + r^{\Delta_{-}}(\beta(x))$,near $r=0$. (...and the numbers $\Delta_{\pm}$ depend on the dimensionality of the AdS and the mass of the field..)

  • As per their notation their "regular" boundary condition in the bulk corresponds to setting $\beta(x)$ (the coefficient of $r^{\Delta_{-}}$) to zero on the boundary and "regular" boundary condition is setting $\alpha(x)$ (the coefficient of $r^{\Delta_{+}}$) to zero.

    How is this compatible with the fact that on using the regular boundary condition the dual CFT necessarily needs to have a term of the form $\int d^d x \beta(x)O(x)$ where $O$ has dimension $\Delta_{+}$ and $\alpha = \langle O \rangle$?

    I thought that they themselves said that in the regular scenario the $\beta$ is being set to $0$ at the boundary - then what is this $\beta(x)$ that is featuring in the boundary action?

  • Below equation 3.19 they argue that the when the double-trace deformation of the boundary CFT is switched off it is seeing the "irregular" scenario and when it is turned to infinity it is seeing the regular scenario.

    But how does one argue that the regular scenario is the the IR fixed point and the irregular scenario is the UV fixed point for the boundary CFT? Where is that argument?

  • Rethinking the section 4 of this paper in a different way - Suppose one wants to calculate the determinant of the bulk theory $det(-\nabla^2 + m^2)$ by taking product of eigenvalues. One wants to say calculate the determinant when the bulk has been quantized with the $\Delta_{+}$ boundary condition. (...one can presumably ask the same question with $\Delta_{-}$ as well..)

    If the bulk is $AdS_{d+1}$ then one can see that the small-r asymptotics ($r=0$ is the AdS boundary in the Poincare patch) of the harmonics are of the form, $# r^{a} + # r^{b}$ for some values $a$ and $b$ (which depend on the eigenvalue and $d$).

    Now knowing the above small-r asymptotics of the harmonics how does one pick out which of these will contribute to the above determinant with say the $\Delta_{+}$ boundary condition? Can someone schematically sketch how the calculation looks like?

  • 1
    $\begingroup$ I agree that the sentence "For general masses, the field must be quantized with the boundary condition $\beta = 0$, the so-called “regular” choice of boundary conditions." is not clear (at least for me). $\beta = \beta (x)$ is a function of $x$, not a function of $r$, so at first glance, it seems a nonsense to speak about a boundary condition for $\beta$. Is it a different boundary ? In one of the cited paper, there is more information (see equation $2.9$ page $6$), but nothing definitive. $\endgroup$ – Trimok Oct 6 '13 at 15:29
  • $\begingroup$ hmm..thanks :) It would be great if you can help with the other 2 points as well..:) $\endgroup$ – user6818 Oct 7 '13 at 0:06

A possible hint :

Following equations $2.5 \to 2.7$), we may define Kernels - Fourier transform of the $2$-point function - for the limiting cases ($f=0, f = +\infty$) :

$$G_{\pm}(k) \sim \int d^dk ~e^{ik.x} \frac{1}{x^{2 \Delta_\pm}}$$

We have then : $G_{\pm}(k) \sim ~ k^{\pm2\nu}$, where $\nu > 0$

We see, that in the UV, the kernel $G^+$ diverges, so it is not relevant in the UV, but converges in the IR. In the same manner, in the IR, the kernel $G^-$ diverges, so it is not relevant for the IR, but converges in the UV, so it would seem natural to associate the conformal dimension $\Delta^-$ ($f=0$), with the UV and the conformal dimension $\Delta^+$($f=+\infty$) with the IR.

We would have a RG flow which begins with $f=0$ in the UV, to finish at $f=+\infty$ in the IR

Finally, a list of the terms employed in the paper, which are not always clear:

$$\begin {matrix} UV & IR \\ f=0 & f=+\infty\\ "irregular" quantization & "regular" quantization\\ \Delta^- & \Delta^+\\ "irregular" boundary\, value & "regular" boundary \, value\\ \alpha = source & \beta = source\\ \beta = \langle O\rangle & \alpha = \langle O\rangle\\ \gamma = - \Delta^- &\gamma= + \infty\\ \end{matrix}$$

  • $\begingroup$ Haven't you gotten your table completely messed up? :) I thought what was stated in page 6 was that the IR is the regular scenario when $\beta$ is switched off but is also sourcing the boundary operator $O$ whose vacuum expectation value is $\alpha$? :) $\endgroup$ – user6818 Oct 8 '13 at 1:52
  • $\begingroup$ The argument between 2.4-2.9 is completely opaque to me! There are too many things there that don't make sense to me. (1) For 2.3 and 2.1 to be equal they need to have, $\sqrt{ det (-\frac{I}{f})}\int D\sigma e^{\int \frac{(\sigma + fO )^2 }{2f} } = 1$ How is this true!? One can think of doing the Gaussian integral substituting the field $y = \frac{ i(\sigma + fO )}{\sqrt{f}}$ but that path integral would evaluate to $\frac{i}{\sqrt{f det(I)}}$ $\endgroup$ – user6818 Oct 8 '13 at 2:01
  • $\begingroup$ (2)To use the large-N factorization 2.4 into 2.3 don't they need that $<e^{\int [\frac{\sigma^2}{2f } + (\sigma +J)O ] } >_0 = < e^{\int [\frac{\sigma^2}{2f }] }>_0 <e^{\int [(\sigma +J)O] } >_0 $ And why should this be true!? $\endgroup$ – user6818 Oct 8 '13 at 2:02
  • $\begingroup$ (3) And even if I assume everything said before it, I don't see how 2.9 follows from all that! $\endgroup$ – user6818 Oct 8 '13 at 2:03
  • 1
    $\begingroup$ c) Relatively to the operator $O(x)$ (you may see $O(x)$ also as a random variable), $\sigma(x)$ or $J(x)$ appear as "constants" (there are not random variables or operators, there are simple functions ), so yes, your factorization in your comment $(2)$ is correct. $\endgroup$ – Trimok Oct 8 '13 at 7:46

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.