In this Veritasium video, a home experiment is presented which appears to produce a very good double-slit interference pattern with normal sunlight.

The experiment is an empty cardboard box with a visor and a placeholder for a microscope slide with two slits on one side. This is arranged with the slits and visor facing the Sun, so the interference forms on the bottom of the box.

enter image description here

They claim to observe a good interference pattern from the two slits:

enter image description here

Discussions of interference in optics textbooks often stress that coherent light is needed to produce such patterns, and that sunlight and other thermal sources of light do not have such coherence. How, then, is this possible?


9 Answers 9


Yes coherent light is required. The important thing to realize is that coherent light is not something that is magically created by lasers. Sunlight is somewhat coherent and it's easy to make it as coherent as you like.

What do people mean when they say "coherent light"? Well, it can be a few different things, but the relevant criteria in this context are:

  • The light is all travelling more-or-less in the same direction ("spatial coherence" or "collimation")
  • The light is more-or-less the same frequency ("temporal coherence" or "monochromaticity")

(See Footnote.)

I say "more or less" to emphasize the fact that it is never 100% coherent, (even from a laser), and it is never 0% coherent (even from a lightbulb or sunlight)

The way to think about it is, the light travelling towards the double-slits coming from a certain direction (e.g. 10 degrees away from normal incidence) create a really nice sharp double-slit pattern. The light travelling towards the double-slits from a different direction (e.g. 20 degrees away from normal incidence) also creates a really nice sharp double-slit pattern, but shifted!

So if you have light coming from every direction between 10 degrees and 20 degrees, you see a blurry composite of all those different double-slit patterns. It's possible that it will be so blurry that you can't even see that there's any pattern there -- it's just blurred out into a smooth line. But it's also possible that it will be only a little bit blurred out and the pattern is still recognizable.

The reason there's a cardboard box in the youtube video is to ensure that all the light from the sky that makes it to the slit is travelling in more-or-less the same direction. (Do you see how that could be done? Take a cardboard box, poke a small hole in it, and then put a double-slit far from the hole ... all the light at the double-slit is now coming in the same direction, i.e. from the hole.)

Frequency (or wavelength) is basically the same: Different frequencies of light make different interference patters, and we see a blurry composite of all those different patterns at once. If more monochromatic light was used (e.g. red laser light), the pattern would be much less blurry and easier to see, especially far from the center of the pattern. Luckily we have color vision, so we can (to some extent) recognize the composite pattern for what it is -- we see rainbows near the center, not just a blur.


Footnote: In comments, people are complaining that the term "coherent light" should refer only to spatial coherence, not temporal coherence. I disagree: The term can refer to either of these, depending on context. For example, in the context of optical coherence tomography, or in the context of "coherence length", or in the context of Michelson interferometers, people routinely use the phrase "coherent light" to mean temporal coherence.

  • 21
    $\begingroup$ This is not a correct definition of coherent light. Light of a single frequency is monochromatic. Coherence means that the phase is correlated over large distances, or maybe in pop-sci terms that the wave trains are fairly long. $\endgroup$
    – user4552
    Commented Sep 8, 2013 at 22:17
  • 6
    $\begingroup$ When light is almost-monochromic, it's temporally coherent. When it's traveling more-or-lesss the same direction, it's spatially coherent. Do you agree? As I said, "coherence" means different things in different contexts, and there are certainly times when "coherence" specifically means only "spatial coherence" (as you propose). But I think I'm entitled to refer to temporal coherence as a kind of coherence. $\endgroup$ Commented Sep 8, 2013 at 22:29
  • 8
    $\begingroup$ No, sorry, but this is just wrong. $\endgroup$
    – user4552
    Commented Sep 8, 2013 at 22:40
  • 10
    $\begingroup$ I'm with @Ben on this. Monochromaticity and coherence are different things. Lasers are monochromatic (except the ultra-short pulsed ones) and coherent. Raw sunlight is neither. The light from a sodium vapor lamp is fairly monochromatic but not coherent. Light from a broadband source that has been passed through two pinholes in series is polychromatic and coherent. $\endgroup$ Commented Sep 8, 2013 at 23:12
  • 6
    $\begingroup$ I edited to clarify that "coherent" usually means "spatially coherent". (I do NOT believe that it ALWAYS means spatially coherent. For example, read some descriptions of a Michelson interferometer...) dmckee -- I wish you would not describe things as "coherent" or "incoherent", as if coherence were all-or-nothing. That's what caused the questioner to be confused in the first place. For example, sunlight is not totally incoherent, it's pretty close to collimated, at least when there are no clouds. $\endgroup$ Commented Sep 9, 2013 at 1:29

“Interference is observed only when the light from the slits is coherent” (by the way, coherent light is defined as having all photons in the same phase, not just about the same wavelength and direction, as one answer here seems to suggest.) The statement can be challenged on three grounds:

  1. Experiment. The Young's double slit experiment predates the laser. Light from a filament lamp produces a satisfactory interference pattern, provided it is approximately monochromatic, and provided that it is nearly parallel. It is a straightforward matter to replicate the experiment, without the need for a laser.
  2. Theory. I quote the great physicist Paul Dirac (The Principles of Quantum Mechanics, Oxford Science Publications, Fourth Edition, p 9) “If the two components are now made to interfere, we should require a photon in one component to be able to interfere with one in the other. Sometimes these two photons would have to annihilate one another and sometimes they would have to produce four photons. This would contradict the conservation of energy. The new theory, which connects the wave function with the probabilities for one photon, gets over the difficulty by making each photon go partly into each of the two components. Each photon then interferes only with itself. Interference between two different photons never occurs.”
  3. More experiment. This latter statement has been tested experimentally by performing the double slit experiment with photographic film and light of a very low intensity. The intensity is so small that the photons pass through the apparatus effectively one-at-a-time, with the average interval between two emitted photons much greater than the time required to pass through the apparatus, so that the probability of two photons “meeting” at the slits, although not zero, is very small. The interference pattern which builds up on the film is precisely the same as when high intensity light is used.

It has been argued that light from say a filament lamp is usually passed through a single narrow slit (as well as a colour filter) before arriving at the double slits. Without this “coherer”, the interference pattern is not observed. While experimentally true, the explanation is erroneous. Two incoherent photons arriving at this slit do not suddenly become coherent because they pass though a small hole together.

The whole thing is resolved as follows: A. Light for the double slit experiment must be nearly monochromatic so that the fringe separation is about the same for all photons, otherwise the interference patterns will form an indiscriminate jumble. B. Light for the double slit experiment must be nearly unidirectional (parallel) otherwise the interference patterns formed in all the slightly different directions behind the two slits will form an indiscriminate jumble.

These two conditions can be met by passing light from an incandescent lamp through a colour filter and a small hole, or by using a laser. The fact that laser light is also coherent is quite unimportant.

  • 2
    $\begingroup$ @Numrok and Bill Dixon: this answer is not very different from that of Steve B. But this one is too extreme to be correct. "Light for the double slit experiment must be nearly monochromatic (...), otherwise the interference patterns will form an indiscriminate jumble": the picture in the question shows exactly the opposite, the pattern is absolutely not "an indiscriminate jumble". Polychromatic sources give very nice rainbow patterns: the first two orders of interference do not overlap in visible light. $\endgroup$
    – L. Levrel
    Commented May 25, 2016 at 12:43
  • 1
    $\begingroup$ Secondly, mentioning photons gives an interesting discussion, but it's not very relevant to the question. (Also I fear it may sustain the frequent misconception of photons being another name for classical wavepackets.) Thirdly, "coherent" means "with constant phase difference", not "with zero phase difference". $\endgroup$
    – L. Levrel
    Commented May 25, 2016 at 12:50
  • $\begingroup$ @Numrok: about coherence, I just meant that coherence (in a weak form of the word maybe) only indicates points have a definite phase relation, but they are not necessarily in phase. Points which are constantly in opposing phase are coherent. $\endgroup$
    – L. Levrel
    Commented May 25, 2016 at 18:00
  • $\begingroup$ OK, so we agree, then I don't see why @SteveB's answer is "flat out wrong". See also his comment "not describe things as 'coherent' or 'incoherent', as if coherence were all-or-nothing". As regards colors, I understand your radiometric point of view. However, in principle quantum detectors are not required to distinguish colors: in the microwaves or radio waves regimes, a classical LC circuit does the filtering job. (Apologies to everyone for the chatty comments, but it's relevant to the subject, and useful to understanding. Maybe we can remove them when Numrok posts his answer.) $\endgroup$
    – L. Levrel
    Commented May 25, 2016 at 19:24
  • $\begingroup$ @L.Levrel I finally got around to writing the answer, see below. hope you like it. $\endgroup$ Commented Aug 17, 2016 at 15:38

Here is Young's original experiment with light ( after having studied water waves)

young dbslit

The first screen generates a point source, so as to create a coherent wave . If it is a pin hole the geometry assures that all the photons come from the same original tiny source of light. Nice illustration here , page 5. Coherent means that the phases describing the mathematical form of the wave are not randomized.

In the video above the slits must be narrow enough and the distance between them small enough so that the wavefront arriving at them is similar to a point source wavefront.In any case the interference pattern is sort of blurred due to the many frequencies.

  • 1
    $\begingroup$ anna v How the first pinhole makes a coherent wave from a thermic source? $\endgroup$ Commented Sep 6, 2018 at 7:29
  • $\begingroup$ @HolgerFiedler it is the mathematics of the maxwell equation for a point source. At the photon level one would have to solve the quantized maxwell for a photon passing through a point source. I suspect it is because of the constraint of having a specific x,y,z,t . $\endgroup$
    – anna v
    Commented Sep 6, 2018 at 7:58
  • $\begingroup$ you had picture from wiki article and the text under picture says "Modern illustration", the video of OP claims to study original Young notes. Where have you got necessity of S1 screen except from that "Modern illustration"? $\endgroup$ Commented Nov 9, 2022 at 14:22
  • $\begingroup$ example researchgate.net/figure/… $\endgroup$
    – anna v
    Commented Nov 9, 2022 at 14:35
  • $\begingroup$ Anna, I'm not arguing this modern setup won't work, I'm arguing you had not proven original one had extra (compared to setup in the video) screen. $\endgroup$ Commented Nov 9, 2022 at 15:01

This question is answered with the Van-Cittert Zernike theorem. When the double slit experiment is performed with incoherent light the fringes get blurred. How much the fringes get blurred depend of how big is the light source and how far is the light source from the double slit.

The intensity pattern on the screen by the an incoherent source is given by:

$I ∝ sinc^2( \frac{𝜋 a}{z λ} x ) ( 1 + γ \cos(\frac{2𝜋D}{zλ} x))$


$D$ = distance between the slits

$a$ = slits width

$γ$ is the degree of spatial coherence: $γ = sinc(\frac{2 𝜋 D M}{L λ})$

$M$ = width of the light source

$z$ = distance from the screen to the double slit

$L$ = distance from the light source to the double slit

Interference fringes are fully visible when $γ = 1$ and they cannot be seen when $γ = 0$

When the experiment is performed with sunlight this formula gives for the coherence of the sunlight:

$L = 150.17$ million of km (distance from sun to earth)

$M = 1.3927$ million of km (diameter of the sun)

$D = 15 μm$

$λ = 500 nm$ (peak wavelength of the spectrum of the sunlight)

$γ = sin(\frac{2\pi DM}{Lλ}) ≈ 0.4$

So with this slits separation the light coming to the sun is partially coherent.

Plotting the pattern with the formula indicated above for z = 1m and a = 1 mm we get:

Partially coherent light

You can see in the plot that the fringes are still visible.

I made a video explaining and simulating how the double slit experiment with incoherent light works. Hope that it helps!

  • $\begingroup$ Your video looks great. BUT the original question is probably better worded as " Is only collimated light created in a double slit apparatus? ... the answer being YES. What your video really shows (or should show) are the allowed paths that photons would take, the requirement being consistent with Feynman theory that boils down to photons only travel (highest probability) allowed paths that are n (n=integer) times their wavelength. This is what happens in laser cavities and dichroic filters for example. The DSE places tight requirements on optical paths or "modes" ( like in a fiber optic). $\endgroup$ Commented Sep 25, 2020 at 0:14
  • $\begingroup$ Another concept is that photons find this path before they become an actual photon! (Maybe its virtual to start). Also single photons behave the same way as multiple photons, i.e. they still make the pattern ... the singles have no other photons to "interfere" with. $\endgroup$ Commented Sep 25, 2020 at 0:18
  • $\begingroup$ @PhysicsDave, "they still make the pattern". as I understand we see interference pattern because photos interfere only with themselves, not others. Photos are each in different phases, the sums of wave functions of each two of them have different patterns. P.S. I hope I wrote correctly after several edits. $\endgroup$ Commented Nov 9, 2022 at 14:53

If the source is far away, light acquires a certain degree of coherence. Have a look at the Van Cittert–Zernike theorem, as pointed in wikipedia:

[...]the wavefront from an incoherent source will appear mostly coherent at large distances

The resulting fringes are different for different colors, but any color is maximum for straightforward direction. So, you see the bright spot at the center.

Then, the wavelengths our eyes are sensible to are not very different for this experiment. In other words, you may choose a distance between the slits such that wavelength/distance is the approx the same for all the frequencies your eye is sensible to (from red to blue), i.e. you choose a large distance. Then, the all frequencies between red and blue will approx peak at the same position. Blue will peak slightly before than red. From the figure, you indeed see the overlapping fringes given by the highest frequency you can see with your eyes (blue light) and the lowest (red light) soon afterwards.


This answer is in the domain of classical electrodynamics. For a quantum description, look at Bill Dixon’s answer.

Let us first see when an interference pattern occurs. On the screen, the intensity of light is given by the resultant field which is the sum of (to a great approximation) two fields. One from each slit. Assuming equal intensity of light from both the slits, the governing factor for the intensity at the screen is phase difference between the two fields.

To ensure a stable interference pattern all one needs to do is to ensure the phase difference between the fields of the two slits at the screen remain fixed. This is easy to ensure. If the field before passing through the slits is a plane wave, then the phase difference is fixed at all points on the screen.

enter image description here

To get plane waves (approximately) one uses a pinhole sufficiently far before the double slit that acts as a collimator. So finally you’ll see an overlap of $N$ double slit pattens for each of the $N$ different frequencies present.


Newton and Young didn't have coherent light, they worked with white light and saw color fringes. But there is a second condition. The dimension of the light source has to be very small or the source has to be at a big distance (in relation to its dimension). In this cases the photons propagates parallel to each other and do not overlap each other on the observation screen.

  • 1
    $\begingroup$ Newton and Young did have spatially coherent light ...but not monochromatic light. Pinhole-light is coherent. Passing sunlight through a small pinhole or slit makes it spatially-coherent but not monochromatic. (Slits produce coherent light in one transverse dimension.) Young's experiment can employ pinholes alone, but if slits are employed the pattern becomes several orders brighter. However, because sunlight lacks temporal coherence, only the first few interference nodes are easily seen (but with colored edges,) while the higher order narrow fringes are blurred into uniform white. $\endgroup$
    – wbeaty
    Commented Sep 6, 2018 at 6:54
  • $\begingroup$ @wbeaty Thanks for specifying. Could you explain, what makes the light from a thermic source coherent during the passage of the pinhole? $\endgroup$ Commented Sep 6, 2018 at 7:26
  • 2
    $\begingroup$ @HolgerFieldler light of perfect spatial-coherence is defined as ideal sphere-wave EM, and with sphere-waves, phase between widely separate points on the sphere is constant (transverse coherence length is long.) If we pass broadband EM through a "small" pinhole (diameter << 1/4 wavelength,) then only spherical EM waves will exit the far side. (One source must be coherent with itself!) Yet "white" light is limited to a 2:1 frequency spread. If using spatially-coherent sunlight, the observed 2-slit node pattern will have a 2:1 color-blur caused by this partial temporal incoherence. $\endgroup$
    – wbeaty
    Commented Sep 6, 2018 at 7:41
  • $\begingroup$ @HolgerFieldler also: temporal coherence or "monochromaticity" is measured along the axis of propagation, while spatial coherence (often called "Coherence") is measured at 90deg: across the wavefront. The pinhole only creates spatial coherence; changing a source with multiple uncorrelated points to a single point. Thermic light through a pinhole has fixed phase only when measured transverse to propagation axis. Search: "spatial filter," a lens and pinhole. See electron6.phys.utk.edu/optics421/modules/m5/Coherence.htm, en.wikipedia.org/wiki/Van_Cittert%E2%80%93Zernike_theorem $\endgroup$
    – wbeaty
    Commented Sep 6, 2018 at 8:06

This is possible because the pattern you see is made of coherent light. The source of the coherent light is the hole. Each color hits the screen where it is supposed to. If you only had one color you would notice the repeating pattern and it would be easier to realize that it was coherent. If you look close you will see where the colors repeat themselves over and over and over.

  • $\begingroup$ "The source of the coherent light is the hole.". Do you mean the slits? Cause in the video holes are slits plus one for viewing with an eye. $\endgroup$ Commented Nov 9, 2022 at 14:33

The following equations predict the phase difference between to light sources, when the light reaches a screen. These equations assume coherent light. In other words, the photons having the same phase when the photons leave the slit.

Constructive interference: d sin θ = mλ

Destructive interference: d sin θ = (m+1/2) λ For m = 0, 1, -1, 2, -2, … and d = distance between slits.

Compliance with these equations (a clean interference pattern) can indicate a high coherent light to random light ratio.


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.