While walking around I noticed something very peculiar. Many chimneys had spiral "wings", while others didn't. I came up with two possibilities:

  1. The wind circles around the chimney upwards which pushes whatever gases being released even higher into the sky.

  2. The wind circles around the chimney downwards which prevent the chimney from going left or right and rather "push" it downwards to make it more steady.

I feel that both of those possibilities are silly. So, why do some chimneys have those spiral "wings"? And why other taller chimneys don't?


  • 5
    $\begingroup$ Jealous that someone beat me to this one, as it's the first one I'd have been able to answer! For anyone interested I did a week of posts about this on my blog: flowviz.tumblr.com/page/7 (April 8th onwards) $\endgroup$
    – user28877
    Aug 27, 2013 at 21:36
  • 2
    $\begingroup$ Look here for everything you could possibly want to know: web.mit.edu/13.42/www/handouts/reading-VIV.pdf $\endgroup$
    – DJohnM
    Aug 28, 2013 at 20:56

1 Answer 1


The spirals are used to prevent the formation of Kármán vortex sheets downwind of the chimney. They work by diverting the wind upwards on one side of the chimney and downwards on the other, creating a three-dimensional airflow pattern that disrupts the vortex sheet. Without them, the vortex shedding could cause vortex-induced vibration in the chimney, which in strong winds might be enough to damage the (relatively thin-walled and flexible) chimney.

Here's a very nice animation of Kármán vortex shedding from Wikipedia, courtesy of Cesareo de La Rosa Siqueira:

Animation of Kármán vortex shedding

The circle on the left represents the (smooth) chimney, viewed from above, with wind coming from the left; the cyan and purple dots are tracer particles showing how air passing the chimney on either side joins the vortex train generated behind the chimney. The Kármán vorticity is an essentially two-dimensional phenomenon; in three dimensions, each vortex would basically be a tall rotating column of air, with one end on the ground and the other end joining together with the adjacent vortices in a complex turbulent region at the altitude of the top of the chimney.

As the vortices are shed on alternate sides of the chimney, each one imparts a counter-force on the chimney itself. Under suitable conditions, these oscillating forces could drive the chimney itself to vibrate from side to side. The helical projections on the chimney prevent this by disrupting the vortices as they form, or at least causing them to form out of phase at different altitudes.

  • 36
    $\begingroup$ Think I wasted 10 minutes just watching the animation.. $\endgroup$ Aug 27, 2013 at 21:32
  • 13
    $\begingroup$ I'd be curious to see the same plot with the spiral feature. $\endgroup$ Aug 27, 2013 at 22:36
  • 6
    $\begingroup$ I'm reminded of a flag flapping in the wind, and I imagine it is indeed very similar for much the same reasons. $\endgroup$
    – KeithS
    Aug 27, 2013 at 22:52
  • 6
    $\begingroup$ What about the second part of OP's question? Why do some taller ones get away without these wings? $\endgroup$ Aug 27, 2013 at 23:52
  • 7
    $\begingroup$ @AlbeyAmakiir: To be honest, I don't know, but I'd guess they might be of stiffer construction, and thus less vulnerable to being damaged by wind-induced oscillations. Really big smokestacks are often built out of reinforced concrete, which doesn't flex much at all; smaller ones are often just thin-walled steel tubes, which do. Or maybe the engineers who designed them just used different safety margins. $\endgroup$ Aug 28, 2013 at 0:00

Not the answer you're looking for? Browse other questions tagged or ask your own question.