I have read that water (or any other liquid) cannot be compressed like gases and it is nearly as elastic as solid. So why isn’t the impact of diving into water equivalent to that of diving on hard concrete?
If water is nearly as incompressible as ground, why don't divers get injured when they plunge into it?
15$\begingroup$ Actually, there was a question someone asked on another Stack Exchange website, asking how to dive from a high cliff into a lake. One answer was from a person who claimed they used to do it often, by hitting the water straight and solid. And the one time they failed to do so, they commented it felt like hitting concrete, and I'll spare you the gory details I remember, but they sustained permanent damage. Of course, that was from a rather high height. $\endgroup$– ClockworkJul 17, 2022 at 23:20
15$\begingroup$ @Clockwork outdoors.stackexchange.com/questions/24797/… $\endgroup$– pacoverflowJul 18, 2022 at 5:31
7$\begingroup$ It does not matter for the answer but it is a mistaken idea that water has compressiblity comparable with solids. Possibly from the quite common (mistaken) statement that water is incompressible. The bulk modulus of water is about 2 GPa whereas for concrete is 45-85 GPa and for steel over 200 GPa. Even compacted sand may have 10 GPa. So water is quite compressible when compared with solids. It is not so only when compared with gases. $\endgroup$– nasuJul 18, 2022 at 20:41
9$\begingroup$ I'm afraid the title might give some people the wrong impression -- is it not true that cliff jumpers can get serious injuries (like paralysis) simply by hitting the water wrong? Perhaps worth emphasizing that cliff jumping is in fact quite dangerous for this reason. $\endgroup$– littleOJul 19, 2022 at 8:53
1$\begingroup$ Concrete doesn't splash $\endgroup$– OrangeDogJul 20, 2022 at 9:06
Adding another perspective to the existing answers:
In your usual diving scenario, water is not confined to the points in space it occupied before, while a slab of ground is – on account of water being liquid and ground being solid.
To construct a scenario where you primarily experience the compressibility when diving into water, you would have to exactly encase the body of water with a perfectly rigid wall with only an exactly diver-shaped hole in it – through which the diver needs to enter. (Also, your diver would have to have the same cross-section everywhere along the direction of diving.) In that case, the water cannot escape to the sides anymore and the diver would fully feel that water is incompressible: They would not be able to enter the water at all and crash into it like a wall.
10$\begingroup$ What a clever answer. $\endgroup$– FattieJul 18, 2022 at 12:53
4$\begingroup$ Great answer! I wonder if you could shatter a glass or stone column with this experiment. $\endgroup$ Jul 18, 2022 at 17:08
39$\begingroup$ Physicists be like... Step 1: Assume a perfectly spherical diver in a vacuum.... $\endgroup$ Jul 18, 2022 at 17:47
50$\begingroup$ @Mindwin: spherical – No, no, no; the diver needs to be cylindrical: “your diver would have to have the same cross-section everywhere along the direction of diving.” A spherical diver could displace some water before blocking the hole, thus softening the impact. $\endgroup$ Jul 18, 2022 at 18:14
15$\begingroup$ @ConnorGarcia Pretty much yes. You can try it yourself with a glass bottle. Just fill it carefully to the top, put the cork in a way that no air bubble is trapped and then hit the cork with hand. Be sure to wear gloves and goggles. Most bottles just lose their bottom, but some shatter spectacularilly. $\endgroup$– fraxinusJul 18, 2022 at 19:10
In simple terms, water (or any fluid) will move out of the way; concrete won’t (unless it is hit very hard). The important properties are viscosity and elasticity rather than compressibility.
9$\begingroup$ I saw some slow motion videos of bullets hitting hard steel and at that velocity things look very liquid. $\endgroup$ Jul 18, 2022 at 7:29
14$\begingroup$ @TomášZato-ReinstateMonica, It's not just a "look." When things meet at high enough speed—especially when the speed is greater than the speed of sound in the material—everything is fluid. $\endgroup$ Jul 18, 2022 at 13:34
2$\begingroup$ @SolomonSlow But there also seems to be a flip side though where if you hit water hard enough it seems to be a solid. $\endgroup$– DKNguyenJul 18, 2022 at 13:45
3$\begingroup$ @DKNguyen Possibly, but you would have to hit harder than by just falling, if the Mythbusters test is indicative. They dropped pigs out of a helicopter and they sustained much more damage landing on concrete than water. $\endgroup$– naschJul 18, 2022 at 21:23
1$\begingroup$ I would say not elasticity in this case. We don't usually call a liquid elastic. Also, compressibility of a solid would be a type of elasticity (characterized by the bulk modulus) so it doesn't make sense to contrast elasticity and compressibility. The rest of this answer correct, though. $\endgroup$ Jul 19, 2022 at 0:28
So why isn't the impact of diving into water equivalent to that of diving on hard concrete?
Water is rather incompressible, but it is not very hard. It deforms rapidly under shear stress, unlike concrete. This greatly prolongs the duration of the deceleration and therefore reduces the impact.
Incompressible doesn't mean that it has to keep the same shape.
But, due to viscosity, water can be "slow" to change its shape under external influence. So when a diver arrives too fast, water can't adapt in time and behave like a brick wall for the duration of the diver's penetration.
$\begingroup$ This “slowness” doesn't have much to do with viscosity, it's mostly because of water's density. $\endgroup$ Jul 17, 2022 at 23:23
7$\begingroup$ Viscosity is taken into account when you're looking for a characteristic time for water deformation, so it plays a role. So is density, of course. $\endgroup$– MiyaseJul 18, 2022 at 0:28
7$\begingroup$ @leftaroundabout The slowness (basically the fluid's inertia) is related to both density AND viscosity as well as the speed you're trying to force the fluid to move $\endgroup$ Jul 18, 2022 at 7:46
2$\begingroup$ Best answer, I think, as it distinguishes between the shape-deformative and scale-deformative components of an external loading. $\endgroup$– TrunkJul 18, 2022 at 8:25
2$\begingroup$ @slebetman that's why I wrote “doesn't have much to do with viscosity”. Yes, viscosity contributes, but at the speeds and length-scale you have at the impact of a human on water from, say, 10 m, the Reynolds number is of the order $3\times10^7$. I.e. far in the turbulent domain, where the dynamics can be well approximated by a completely inviscid fluid. $\endgroup$ Jul 18, 2022 at 10:44
Concrete is rigid to a good approximation: it will keep its shape and its volume.
Water is just incompressible: it will keep its volume but not its shape. Water will move out of your way on impact.
For very skilled divers, they will also use a technique where they enter the water hands first, with a particular shape that pulls air in with them. They then spread the hands out, creating a 'hole' in the water that the rest of their body goes into. This creates a sound that divers call a 'rip', as it sounds like tearing cloth when done properly. It also leads to a much smaller splash than entries done without this technique.
$\begingroup$ linked video has been removed, but this is a valid alternative: youtube.com/watch?v=8GqWTqDhahM&ab_channel=Vox $\endgroup$– QuilloJul 21, 2022 at 11:39
Well, depends on the way someone dives in and the altitude.
You might have wondered at some point, why does it hurt when you fall into the water with your belly, but when you fall in with your feet almost vertically to the water you feel no pain. On the internet you can definitely find some answer on this question, for example here: https://www.scienceabc.com/sports/why-does-water-feel-like-concrete-when-you-belly-flop-into-it.html
So as someone dives in, by making contact, pressure is indeed exerted on the surface of the water (or any other fluid of similar physical properties). However, unlike ground, water has the property to change its shape (deformation) based on its density viscuosity, which is a process that uses time. As a result, when contact is made by some large and surface (like the belly), water might not have time to deform and columns of water can get trapped beneath the surface temporarily exerting back force to the body following the action-reaction law.
Consequently, the less surface you use and the lower altitude (thus slower diving) you jump from, the less probability you have to get hurt by diving in, as water gets enough time to deform and make its way out. The viscuosity of water is the property that counters its incompressibility (reciprocal to its elasticity) so that you can dive in without pain.
$\begingroup$ I don't think it's about probability of getting hurt, but rather the probability of various degrees of hurtedness. Unless you define a yes/no "am I hurt" threshold, which will probably be a mostly-arbitrary decision, expected hurt would be a better thing to consider. $\endgroup$ Jul 19, 2022 at 20:37
As others have pointed out, water isnt very different from solids in terms of its resistance to changes in volume; but the defining difference between a liquid and a solid, lies in its resistance to 'shear', or a force trying to slide different parts of the medium past one another. Solids resist shear, whereas liquids do not (at most they resist shear-rate; but by definition their resistance to slowly applied shear forces should tend to zero).
However, liquids do resist shear-rate. And moreover, moving them out of the way of a diver requires acceleration, which also requires force applied to the fluid. So the faster one goes, the less important the resistance to static shear forces actually become, and the more important viscous and inertial forces become.
As a matter of fact, when reasoning about things like interplanetary collisions and the like, or even kinetic-energy-based tank round impacts, it usually matters little if one imagines one is hitting a liquid or a solid; the resulting contact forces will be dominated either way by the pressures required to 'get the stuff to accelerate out of the way'; how the intermolecular bonds feel about the whole thing is less significant, and the density is the most important determinant of how things unfold.
So while water at realistic diving speeds can be quite mean, as you build up the pressure required for the water to shear/flow out away from under you, at these velocities its still nothing like hitting concrete. First of all concrete is about three times more dense so even if it were still liquid you should much prefer the water; but you diving onto the concrete isnt sufficient to render its shear strength insignificant, as evidenced by the fact that the concrete most likely does keep its shape, or something close to it, whereas the water would not.
One can also imagine scenarios where shear-rate is the dominant factor. If you fall onto a bath of pitch, even though its a liquid that will fully comply to an applied shear force given enough time, it will be much the same experience as hitting a solid block of the same density, as its extreme resistance to shear rates will have much the same effect as a persistent intermolecular bond, on the short timescales that govern your impact. The damage to your body would look much the same, regardless of wether its shear-rate or absolute shear resistance of the medium, that brings you to a stop over a distance of fractions of a millimeter. The trajectory that your body is contorted into to satisfy the balance of all forces, is sufficient to define its fate, regardless of the mechanism that gets your there.
Basically, you do experience an impact when you hit the free surface of a liquid (which could be very substantial), but the water moves out of the way so it's not like hitting concrete.
When a solid object impacts on the surface of a liquid, extremely high pressure develops at the site of contact. If you're interested, von Kármán and Wagner did classical work on deriving the inertial forces due to a solid body hitting a free liquid surface.
Von Kármán showed that the pressure on the bottom surface of the impacting body approaches infinity for flat impacts.
See for example:
- H. Wagner, Phenomena associated with impacts and sliding on liquid surface, Zeit. Ange. Math. Mech. 12, 193-215 (1932).
- T. von Kármán, The impact on seaplane floats during landing, NACA TN 321 (1929).
A more recent relevant study which I found which builds on the classical work:
$\begingroup$ It would be great if you could provide a more concrete reference than “von Kármán and Wagner did”. $\endgroup$ Jul 21, 2022 at 13:50
$\begingroup$ References added as requested. $\endgroup$– TomJul 21, 2022 at 16:14
If water is treated as incompressible it has constant volume, but being a fluid it can change shape. The less the viscosity the easier it is to change its shape.
I don't quite understand the question, but isn't it:
Because water is a fluid and ground is not.
Falling with 100m/s on water might be much the same as falling on ground, but when diving, then your speed is very slow and water just flows around.
Try this in a pool or bucket of water or whatever: Slap the water with your open palm. OUCH ! BELLY FLOP Stab the water with your outstretched fingers, blade-like they go right in like an Acapulco cliff diver. Now punch the water. ouch, kind of. A cannonball dive. not a stab, not a flop. It is all about the distribution of force across the waters surface x the surface area of contact.
It can also be viewed in acceleration terms, a sufficiently accelerated water still will pass through a concrete wall, neatly