Ohm's law states that the relationship between current ( I ) voltage ( V ) and resistance ( R ) is

$$I = \frac{V}{R}$$

However superconductors cause the resistance of a material to go to zero, and as I understand it, as $R \to 0$, $I \to \infty$. Does this present a problem for Ohm's law?


Ohm's law is generally NOT correct, it's called a law for historical reasons only!! It's a law in the same sense in which Hooke's law is a law... it holds only for certain systems under certain conditions, but it's widely known because it's simple and linear!

It's not just superconductors, diodes are a neat everyday example of Ohm's law failing to hold. But it fails for every material under sufficiently extreme circumstances.

Check out this I-V graph for a diode.

Diode I-V graph

  • 1
    $\begingroup$ And that on resistance region behaves as a real resistance, for instance to an AC signal, which only cares about the changes in current w.r.t. changes in voltage. Another exammple is the input impedance of an amplifier which has a bias current flowing out of it. You can't just do R = V/I. Rather you might divide the peak-to-peak voltage of an applied signal by the peak-to-peak current variation. $\endgroup$ – Kaz Apr 29 '13 at 19:16
  • $\begingroup$ I really like the look and feel of that graph! May I ask what program you used to create it? $\endgroup$ – Martin J.H. Jun 26 '13 at 12:16
  • $\begingroup$ I like it too! But I didn't create the image, it's from wikimedia commons. Here's the link with author's name if you want to ask how it was made en.wikipedia.org/wiki/… $\endgroup$ – Gwynbleidd Jun 26 '13 at 19:21
  • $\begingroup$ So how many such "laws" are only approximations? Is gravitational law also like that? $\endgroup$ – Jus12 Oct 4 '15 at 18:54
  • 1
    $\begingroup$ @Dove I can't tell if you're trolling or being serious, the context of the question and the answer couldn't be more clear, there's nothing to say about it... $\endgroup$ – Gwynbleidd Feb 13 '17 at 3:04

Ohm's law works for ordinary conductors for a reason: the particles carrying the current (usually, but not always electrons) scatter incoherently and inelastically from features of the conductor. In the case of an electron current, at low temperature this scattering is caused by impurities in the conductor; at high temperatures, the dominant source of scattering is electron-phonon scattering (phonons are coherent vibrations of the conductors fundamental lattice). As long as those conditions pertain, you can expect Ohm's law to be a good approximation to the behavior of the current.

However, in a superconductor quantum mechanics rears its elegant head and generates a situation in which coherent effect dominate to a point where is effectively no inelastic scattering and as such no energy loss in the flow of current.

Nor are these the only possible situations, as Schlomo Steinbergerstein notes semiconductors exhibit a wide range of conduction behaviors.

The difference in macroscopic physics is down to a difference in microscopic physics.

This business where regimes dominated by coherent and incoherent interaction show very different behavior comes up a lot in various corners of physics and one could spend a long (and possibly enjoyable) time surveying those effects alone.


Looking at your question from the perspective of ideal circuit theory, an ideal resistor has the following I-V relationship:

$V_R = I_R R$

The voltage across the resistor is proportional to the current through the resistor with constant of proportionality equal to $R$.

In ideal circuit theory, an ideal conductor can be thought of as a "zero ohm resistor". Setting $R = 0$ in the above equation gives:

$V_{R_0}= 0$

In other words, for any value of current, the voltage across an ideal conductor is exactly $0V$.

Of course, in the real world, there are no ideal resistors or conductors. However, Ohm's Law is still a good approximation for many materials over some limited operating range.

From Wiki:

The simplest method to measure the electrical resistance of a sample of some material is to place it in an electrical circuit in series with a current source I and measure the resulting voltage V across the sample. The resistance of the sample is given by Ohm's law as R = V / I. If the voltage is zero, this means that the resistance is zero.


Ohm's Law does not have a problem here any more than any other formula in the sciences which involves dividing by a denominator which can go to zero.

Ohm's Law exhibits a singularity when there is no resistance, but a nonzero voltage. An ideal voltage source cannot be connected in parallel with a zero resistance, because that implies that infinite current flows, which is absurd.

Note that superconductivity doesn't eliminate impedance. Even if you had an ideal voltage source to connect across a piece of superconductor, the current would not be infinite. It would be limited by inductance (which would allow the current to gradually rise without bound). To properly model the circuit, it would have to be drawn as an ideal voltage source connected to an ideal inductor. Such a thing is mathematically possible and analyzable (and in fact probably occurs in numerous elementary textbooks as an example).

Ohm's Law is an idealization based on ideal resistance, which has no parasitic inductance or capacitance. As such, it breaks down long before we reach zero resistance. So the singularity at R=0 is purely academic. At R=0, we have a piece of wire which may be superconductive, but it exhibits capacitance and inductance.

Note, by the way, that in superconductors, current can flow without voltage. But this fits in with all ordinary laws that we apply in analyzing simple circuits. If draw the schematic of a ciruit which consists of a loop of ideal wire, then some finite current can flow in that loop forever without any potential differences anywhere in that loop. We can divide the loop in half, and each half can "think" that there is a current source in the other half.


No, because the voltage drop across the device also goes to zero.

  • $\begingroup$ I see this answer has a downvote, but I don't see any answers contradicting it, either. Can anyone comment on whether the voltage can be non-zero across a superconductor? $\endgroup$ – Justin Apr 29 '13 at 19:26
  • 3
    $\begingroup$ Answers should generally be more constructive and one-liners should be in the comment section. $\endgroup$ – Gwynbleidd Apr 29 '13 at 19:57

In superconductivity we have current without voltage, and in Josephson effect we have a current without voltage. These are quantum systems where bizarre behavior is anticipated. The resistivity of the superconductor is given by $\rho=\mu_0\hbar/(2m_e)$, where the constants are understood.

  • $\begingroup$ Welcome on Physics SE :) Here you can look up how to make formulas work on the website :) $\endgroup$ – Sanya Dec 2 '16 at 18:13

protected by Qmechanic May 23 '13 at 21:13

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.