# How does the freezing temperature of water vary with respect to pressure?

I know when the pressure is reduced, the boiling temperature of water is reduced as well. But how does the pressure affect the freezing point of water?

In a low-pressure environment, is water's freezing temperature higher or lower than $$0\sideset{^{\circ}}{}{\mathrm{C}} \, ?$$

If you decrease the pressure, the freezing point of water will increase ever so slightly. From 0° C at 1 atm pressure it will increase up to 0.01° C at 0.006 atm. This is the tripple point of water. At pressures below this, water will never be liquid. It will change directly between solid and gas phase (sublimation). The temperature for this phase change, the sublimation point, will decrease as the pressure is further decreased. To learn more details, image google "water phase diagram" and study the pictures.

You can have a look at this pressure/temperature phase diagram of water:

For reference, the diagram shows a point labeled $$ \textbf{E} "$$ for fairly standard human conditions, around $$25\sideset{^{\circ}}{}{\mathrm{C}} ~ \left(\sim 77\sideset{^{\circ}}{}{\mathrm{F}}\right)$$ and normal atmospheric pressure.

The phase boundary between $$\color{darkblue}{\textbf{Solid Ih}}$$ and $$\color{green}{\textbf{Liquid}}$$ represents the temperature/pressure combinations at which water coexists between liquid water and solid ice. This boundary shows that the freezing temperature is roughly constant over a large pressure range, from about the triple-point (where solid, liquid, and vapor can coexist) and up to a pressure of about $$200 \, \mathrm{MPa} .$$

Here is an interesting article that shows how water was frozen at high temperature under pressure

Here is an extract Sandia Convert Water to Ice in Nanoseconds Published on March 19, 2007 at 1:15 AM Sandia’s huge Z machine, which generates temperatures hotter than the sun, has turned water to ice in nanoseconds.

“The three phases of water as we know them — cold ice, room temperature liquid, and hot vapor — are actually only a small part of water’s repertory of states,” says Sandia researcher Daniel Dolan. “Compressing water customarily heats it. But under extreme compression, it is easier for dense water to enter its solid phase [ice] than maintain the more energetic liquid phase [water].” Sandia is a National Nuclear Security Administration (NNSA) laboratory.

“Apparently it’s virtually impossible to keep water from freezing at pressures beyond 70,000 atmospheres,” Dolan says.

When high pressure is applying on a gas, it gets converted into liquid form. Similarly, if more pressure is applied to the liquid, force of attraction increases so that the liquid is converts into solid state. As the pressure increases the rate of crystallization also increases. i.e., the freezing point also increases.

What happens when water becomes ice - it expands.

With a pressure change apply Le Châtelier's principle - "If a system at equilibrium is subjected to a change in pressure . . . . . . . then the equilibrium shifts in such a way so as to undo the effect of the change".

So in the case of the volume of ice being bigger than the volume of water when the pressure is increased the system tries to reduce the pressure by converting ice into water.