In order to fold anything in half, it must be $\pi$ times longer than its thickness, and that depending on how something is folded, the amount its length decreases with each fold differs.
Britney Gallivan, the person who determined that the maximum number of times a paper or other finite thickness materials can be folded = 12.

Mathematics of paper folding explains the mathematical aspect of this.

I would like to know the physical explanation of this. Why is it not possible to fold a paper more than $N$ (=12) times?

  • 3
    $\begingroup$ LMGTFY on meta.stackoverflow $\endgroup$
    – iamsid
    Jan 16, 2011 at 21:03
  • 3
    $\begingroup$ I have done this trick: use a large sheet of tissue paper. The small number of folds is an interesting demonstration of exponential growth, of course, but it isn't really a physics topic, so I have voted to close. $\endgroup$ Jan 16, 2011 at 21:06
  • 2
    $\begingroup$ I think this question is appropriate. Origami is about the art of folding paper. This question is about the physics and the mathematical properties that follow from making simple folds in paper. $\endgroup$
    – Simon
    Jan 16, 2011 at 21:47
  • 2
    $\begingroup$ Do the close-voters have a physical explanation for this 8-fold limit? I don't know about the mythbusters episode referenced in @Simon's answer, but I do know that this is a universal limit. I remember trying this several times when I was younger. Now it would be great to have a physical reason for this limit. $\endgroup$
    – user346
    Jan 16, 2011 at 23:44
  • 5
    $\begingroup$ @dmckee IMO geometry is physics. So a geometrical explanation is perfectly satisfactory for me :) $\endgroup$
    – user346
    Jan 17, 2011 at 22:19

4 Answers 4


I remember that the question in your title was busted in Mythbusters episode 72. A simple google search also gives many other examples.

As for single- vs alternate-direction folding, I'm guessing that the latter would allow for more folds. It is the thickness vs length along a fold that basically tells you if a fold is possible, since there is always going to be a curvature to the fold. Alternate-direction folding uses both flat directions of the paper, so you run out of length slightly slower. This would be a small effect since you have the linear decrease in length vs the exponential increase in thickness.

Thanks to gerry for the key word (given in a comment above). I can now make my above guess more concrete. The limit on the number of folds (for a given length) does follow from the necessary curvature on the fold. The type of image you see for this makes it clear what's going on

Fold diagram

For a piece of paper with thickness $t$, the length $L$ needed to make $n$ folds is (OEIS) $$ L/t = \frac{\pi}6 (2^n+4)(2^n-1) \,.$$ This formula was originally derived by (the then Junior high school student) Britney Gallivan in 2001. I find it amazing that it was not known before that time... (and full credit to Britney). For alternate folding of a square piece of paper, the corresponding formula is $$ L/t = \pi 2^{3(n-1)/2} \,.$$

Both formulae give $L=t\,\pi$ as the minimum length required for a single fold. This is because, assuming the paper does not stretch and the inside of the fold is perfectly flat, a single fold uses up the length of a semicircle with outside diameter equal to the thickness of the paper. So if $L < t\,\pi$ then you don't have enough paper to go around the fold.

Let's ignore a lot of the subtleties of the linear folding problem and say that each time you fold the paper you halve its length and double its thickness: $ L_i = \tfrac12 L_{i-1} = 2^{-i}L_0 $ and $ t_i = 2 t_{i-1} = 2^{i} t_0 $, where $L=L_0$ and $t=t_0$ are the original length and thickness respectively. On the final fold (to make it n folds) you need $L_{n-1} \leq \pi t_{n-1}$ which implies $L \leq \frac14\pi\,2^{2n} t$. Qualitatively this reproduce the linear folding result given above. The difference comes from the fact you lose slightly over half of the length on each fold.

These formulae can be inverted and plotted to give the logarithmic graphs

Number of folds given a length

where $L$ is measured in units of $t$. The linear folding is shown in red and the alternate direction folding is given in blue. The boxed area is shown in the inset graphic and details the point where alternate folding permanently gains an extra fold over linear folding.

You can see that there exist certain length ranges where you get more folds with alternate than linear folding. After $L/t = 64\pi \approx 201$ you always get one or more extra folds with alternate compared to linear. You can find similar numbers for two or more extra folds, etc...

Looking back on this answer, I really think that I should ditch my theorist tendencies and put some approximate numbers in here. Let's assume that the 8 alternating fold limit for a "normal" piece of paper is correct. Normal office paper is approximately 0.1mm thick. This means that a normal piece of paper must be $$ L \approx \pi\,(0.1\text{mm}) 2^{3\times 7/2} \approx 0.3 \times 2^{10.5}\,\text{mm} \approx .3 \times 1000 \, \text{mm} = 300 \text{mm} \,. $$ Luckily this matches the normal size of office paper, e.g. A4 is 210mm * 297mm.

The last range where you get the same number of folds for linear and alternate folding is $L/t \in (50\pi,64\pi) \approx (157,201)$, where both methods yield 4 folds. For a square piece of paper 0.1mm thick, this corresponds to 15cm and 20cm squares respectively. With less giving only three folds for linear and more giving five folds for alternating. Some simple experiments show that this is approximately correct.



$a(n)$ - Area after $n$ folds.
$t(n)$ - Thickness after $n$ folds.
$d(n) = k\frac{t(n)}{d(n)}$ - Difficulty after $n$ folds.

$a(n+1) = \frac{1}{2} a(n) \rightarrow a(n) = c_1 2^{1-n}$
$t(n+1) = 2 t(n) \rightarrow t(n) = c_2 2^{n-1}$

$d(n) = k4^{n-1}$


You can't fold an atom.

Area of atom $= a(N) = c_1 2^{1-N}$

Solve for $N$.

No paper can be folded more than N times. :)

So, its very very very very very difficult. After folding a few times. ;)


I believe there is a physical limit for folding, due to the very low extensibility of paper (i.e. you cannot stretch paper). Take the sketch posted by @Simon:

enter image description here

Observe that the inner layer (previously top layer) will incur compression while the outer layer (previously bottom one) will incur extension. This is giving rise to a bending rigidity force. This bending rigidity can be reduced if the layers of paper are allowed to slide relative to one another, however as you add more layers this is not possible anymore because there is another fold at the other end of the paper stack.

Let's assume that the inner radius of curvature of the fold is zero and that there is no relative sliding at all of the paper layers. Then the midline of the inner layer at the fold has length $t\pi/2$ (where $t$ is the thickness), while the outer one has length $(N+1) t\pi/2$ (where $N$ is the number of folds). Thus the strain is as $N+1$, and will reach at some point the maximum strain that the paper your sheet is made of can allow: you'll be either prevented from folding, or you will tear the paper if you're able to apply sufficient force.

In practice, what you do to increase this limit is that you make a "loose" fold for the first few folds: this allows to palliate for the inextensibility of paper and provides some additional length to allow the outer bends (at the price of small wrinkles in the inner ones).

Using a material more extensible than paper wll also allow for more folds.


I made this printout of how many angular degrees are consumed per fold for the required range that would signify a valid fold, being 180 degrees turn of the paper, with each step consuming one-half of the remaining range from the fold before it.

enter image description here

One fold is 180 degrees of angular torsion, and the layers of the fold converge on the fold to reduce the range of additional tortion by one half for each fold of the paper.

The known limit, which is 11 folds before it becomes impossible to fold a piece of paper again, is the first in the series that is a repeating decimal of the prior value, and so we can see that a limit point is reached where progress becomes immpossible or extremely difficult.

The common limit that people usually report getting is 7 folds before they cannot fold a piece of paper or any other material any further, and in my series here that is the first step in which the net gain in torsion is a fraction of one, and efficiency is lost at this point so it is the initial beginning of the loss of efficiency in torsion achieved per halving, and so it becomes exponentially more difficult at that point to achieve the next fold.


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.