Whenever I put a meal in the microwave which contains cheese, why does the cheese get hot before the rest of the meal is heated through?

  • 5
    $\begingroup$ Possible duplicate "physics.stackexchange.com/q/43722 $\endgroup$
    – Mass
    Commented Jan 25, 2017 at 18:26
  • 3
    $\begingroup$ @AMS It's related but asking something different. The other question asks why cheese feels hotter, which probably has to do with the surface area of contact between melted cheese as compared to bread. On the other hand, this question presumes that the cheese actually is hotter. $\endgroup$
    – DanielSank
    Commented Jan 25, 2017 at 18:28
  • 9
    $\begingroup$ Possible duplicate of Why does pizza cheese seem hotter than the crust? $\endgroup$ Commented Jan 25, 2017 at 18:57
  • 6
    $\begingroup$ I reopened this question because it is not a duplicate. The question Why does pizza cheese seem hotter than the crust? does not address the rate of heating of a meal containing cheese. This question specifically asks why the rate of temperature rise of the cheese is higher than the rest of the meal. $\endgroup$ Commented Jan 25, 2017 at 21:08

3 Answers 3


It is because cheese has a nice combination of water and fat. The water is important since the microwave transfers energy to it by making the water molecules vibrate. On the other hand, oils, in general, have lower specific heat (compared to water). This means that given the same amount of heat, the temperature change is higher for fat than for water. You can see in this table as normally fatty food has greater specific heat. Moreover, oils have higher boiling points so the cheese can reach a temperature above $100\ \mathrm{^\circ C}$.


Both vegetable and animal oils are made of nonpolar molecules. This means that oils cannot be effectively heated up by dieletric heating (microwave absorption). If we consider the limit case where oil does not absorb microwaves at all, then any combination of water and oil (mixture) outperforms pure oil at the rate of heating up under microwaves. The mixture, in this case, heats up because water is absorbing microwaves and is giving up heat to the oil by thermal conduction. On the other hand to compare the performances of the mixture and pure water we need to take into account the specific heat of both substances. If the specific heat of the mixture is sufficiently smaller than the specific heat of the water, then the former will outperform the latter in heating up under microwaves.

Can we heat up oil in a microwave? Oils' molecule, in general, may have a non-zero dipole moment but it is so small that oil's dielectric loss factor is about a hundredth of the water's one. Recall that the dielectric loss factor roughly expresses the degree to which an externally applied electric field will be converted to heat. It is in general dependent of the frequency of the radiation and for water, it is maximum at $2.45\, \mathrm{GHz}$, the frequency of most microwaves oven. By a simple home experiment, one can easily check that conduction plays a major role. Try to get some containers that respond differently to microwaves, that is, test how the empty containers heat up. Then separate one that does not heat up and one that does heat up. Fill them with the same amount of oil and let them on the microwave oven for the same amount of time. The oil in the microwave interacting container will be much warmer. The explanation is that the oil was mainly heated up by conduction. Note that in a homogeneous mixture of oil and water (like a cheese) this conduction is optimized.

  • 3
    $\begingroup$ So the water allows more efficient heat transfer and the fat allows the temperature to be higher for a given amount of heat? $\endgroup$
    – DanielSank
    Commented Jan 25, 2017 at 18:23
  • $\begingroup$ @DanielSank Exactly. And there must be good balance between the two. I bet parmesan cheese (little water) and a mascarpone (too much water) don't heat up as easy as a provolone. $\endgroup$
    – Diracology
    Commented Jan 25, 2017 at 18:43
  • $\begingroup$ Does the fat absorb microwave energy as well? If it is only the water absorbing the energy and then distributing it to the fats, it can't get hotter than 100 ∘C. The water would leave the cheese as steam. $\endgroup$
    – Shane
    Commented Jan 26, 2017 at 7:38
  • 2
    $\begingroup$ @Shane No, fats absorb microwaves quite nicely - less so than water, but they get heated up to a higher temperature thanks to their much lower heat capacity. Keep this in mind when microwaving fatty foods - it's really easy to "burn" the fats while the meal is still cold. Ever tried to microwave chocolate or bacon? $\endgroup$
    – Luaan
    Commented Jan 26, 2017 at 8:27
  • 1
    $\begingroup$ Both @ChemicalEngineer and Diracology - the ability of the fat to go above the boiling point of water is irrelevant. As long as there is any water in the fat, fat cannot get that hot either. What is relevant is the limited power of the microwave. How much cheese will saturate that factor, to the point of perfect absorption? And how much water? $\endgroup$ Commented Jan 26, 2017 at 17:28

The solid structure of cheese helps prevent steam loss

Water absorbs microwaves well, primarily at the boundaries since the water at the boundaries absorbs most of the microwaves before they get deeper into the body of water. If you heat water alone, its boundaries get most of the heat; then, steam can escape, causing much of that absorbed heat to be lost. This results in a powerful cooling effect called evaporative cooling.

Evaporative cooling is an important effect in microwaves. For example, if you get a microwavable dinner, it'll often tell you to cut a slit in the overwrap without actually removing the contents. The slit allows steam to escape a bit so that pressure doesn't cause the bag to pop, but it still keeps in more steam to help retain heat. This reduces evaporative cooling.

Cheese's solid structure should have a similar effect. This is, the water isn't free to just escape as steam, so the heat it captures isn't so easily lost.

Not really about fats and water working together

The currently up-voted answer asserts that cheese and fats work together using their differing levels of microwave absorption and heat capacity to warm up faster than either alone.

Unfortunately this can't be true because it's an entirely first-order mechanism. Fats and water would both heat up at some rate proportional to the microwave absorption divided by their heat capacity, i.e. $$\frac{\text{d}T}{\text{d}t}{\propto}{\frac{\left[\text{absorption ability}\right]}{\left[\text{heat capacity}\right]}}$$ If you combined them without a second order effect, then their combined absorption ability and heat capacity are both a weighted average of the pure values for each, i.e. $${\left.\frac{\text{d}T}{\text{d}t}\right|}_{\text{cheese}}{\propto}{\frac{{x}_{\text{water}}{\left[\text{absorption ability}\right]}_{\text{water}}+{\left(1-{x}_{\text{water}}\right)}{\left[\text{absorption ability}\right]}_{\text{fat}}}{{{x}_{\text{water}}\left[\text{heat capacity}\right]}_{\text{water}}+{\left(1-{x}_{\text{water}}\right)}{\left[\text{heat capacity}\right]}_{\text{fat}}}}$$ Then, let's assume that absorption ability and heat capacity are constant for both fat and water (which isn't really true, but a reasonable simplification). Then, regardless of the actual values for the absorption abilities and heat capacities, there is no combination that can outperform both pure substances. If both pure substances heat up exactly as fast, then their combination should do the same. But if one heats faster, then the more of it the combination has, the faster the combination'll heat. That is, if we optimize ${x}_{\text{water}}$, we'll necessarily find either ${x}_{\text{water}}=0$ (pure fat) or ${x}_{\text{water}}=1$ (pure water) as the optimal solution.

When a combination works like this, there must be a higher-order effect at work. In this case, I'd suspect that the most important higher-order effect is that cheese traps the steam, such that the water molecules that happen to trap the most heat don't just fly away.

Not really about boiling points

Some have pointed out that water boils at ${100}^{\circ}\text{C}$, so the fats might assist by being able to be hotter. As @JirkaHanika pointed out, this isn't really relevant because water isn't bothered by this until it actually hits its boiling point of ${100}^{\circ}\text{C}$.

If you're microwaving your pizza to be that hot, then you're drying it out. This YouTube video shows a guy putting a cup of water in the microwave with his pizza to help keep the crust crispy:

  • $\begingroup$ I agree cheese has less capacity to cool itself through latent heat loss (than does water); this is definitely a component of it. $\endgroup$ Commented Jan 26, 2017 at 9:57
  • 1
    $\begingroup$ @RobertFrost Energy's conserved, so heating can only be done by microwave absorption or exothermic reaction. Fats do store a lot of energy that can drive exothermic reactions, as that's their primary biological function (they're basically batteries). Still, unless they're somehow undergoing chemical change, it's going to be a simple matter of the heat from the microwaves accumulating - and then being partially lost through cooling, e.g. evaporative cooling. The primary source of variation's going to be how effective the cooling mechanisms are; anything else violates conservation of energy. $\endgroup$
    – Nat
    Commented Jan 26, 2017 at 10:21
  • 1
    $\begingroup$ @RobertFrost Well, mostly. Technically, there's an enthalpy of mixing that'll change with the composition as the cheese deforms due to microwaves heating it up. But, per Le Chatelier's principle, that change in enthalpy of mixing will be a resistive force, not a heating force. $\endgroup$
    – Nat
    Commented Jan 26, 2017 at 10:25
  • $\begingroup$ @RobertFrost Some say the cheese will melt with fat, some say with steam / From what I've tasted of Kraft meals / I hold with those who favour steam. / But if I had to reheat twice, / I think I know enough of cheese / To say that for burning my mouth fats / Are also great / And would suffice. $\endgroup$ Commented Jan 26, 2017 at 11:00
  • 1
    $\begingroup$ Oils and fats are formed by nonpolar molecules. Fact! Microwaves heat up food by vibrating polar molecules. So, fats absorb much less microwaves than water. $\endgroup$
    – Diracology
    Commented Feb 1, 2017 at 12:50

I think that the key point in the first answer is oils have higher boiling points so the cheese can reach a temperature above 100 ∘C.

If you heat water, when it reaches 100C it will start boiling and all microwave energy deposited thereafter will be converting water to steam, which promptly escapes.

In cheese, water is emulsified with fat. (I don't know if it's small droplets of water encased in fat or vice versa. I'd guess the former since it's more than 50% fat). In any case, I think it will be possible for the water to become somewhat superheated without turning to steam in this environment, where it's got a very large amount of water surface in contact with fats which can be heated above 100C without boiling. In other words, the mixture with fat may suppress steam-bubble formation and growth.

Also the water in cheese is derived from milk, which means it will contain a very significant amount of water-soluble milk proteins. These long-chain molecules may also serve to stabilize the water at >100C (especially if they have hydrophilic parts and hydrophobic parts, which will tend to bind between the water and fat where the two touch). They may even allow pressure in the water droplets to somewhat exceed ambient atmospheric pressure.

The obvious experiment is to measure the temperature of cheese freshly heated in a microwave, or even during heating. For the former melt it in a well-insulating container (I'd suggest a smallish cheese sample in a hole in an expanded polystyrene block, and a large mug of water in the oven at the same time so most of the microwave energy has somewhere else to go). For the latter you'll need a completely non-metallic thermometer which does not significantly absorb microwaves and which reads well above 100C, which might be an interesting bit of research in itself. My guess is that the cheese will reach a few degrees above 100C.


Not the answer you're looking for? Browse other questions tagged or ask your own question.