I am interested in modeling water flow including boundary flow (with friction) against other objects in the path of the water flow.

I'm not a physicist but I am interested to learn the relevant physics (and the corresponding mathematical model) required to begin modeling a generic simulation engine.

I've searched this forum using "model water flow surface friction" search string, and I've read water flow in a sink, and What is the velocity area method for estimating the flow of water?.

Please suggest topics and other search strings, and advise if this is off-topic for this Physics forum. Thanks in advance.

Clarification: I'm looking at

  • no-slip condition (i.e. solid walls)
  • with turbulence


  • introduction of another body (with mass) into model for calculating the displaced water flow around the body.

Modelling flow of fluids in general is a big research (and industrial) field. This field is called Computational Fluid Dynamics (CFD)

All CFD methods are based on the so-called Navier-Stokes equations and the continuity equation, which is nothing more than conservation of momentum and mass.

There are different flavours in the methods of discretizing these equations:

  • Finite Volume
  • Finite Element
  • Finite Difference

Which all have pro's and cons.

In all these methods, friction is implicitly introduced by the boundary conditions. A common assumption for boundaries, as solid walls, is the so-called no-slip condition. This basically means that the local velocity at the wall is zero. This is basically nothing more than a sink of momentum via the wall shear stress. Making the model neglect friction, you should assume a zero-shear boundary, which means that the wall-normal gradient of the velocity component is zero.

As you're talking about water flows and objects, you know that these flows become turbulent. The non-linear term in the Navier-Stokes equation will be responsible for flow phenomena at lots of scales. Therefor, it is common practice to model this turbulence. Also here, we have different approaches:

  • DNS: Direct Numerical Simulation: No modelling at all, but the smallest grid size is smaller than the smallest turbulent scales
  • LES: Large Eddy Simulation: The Navier-Stokes equation is filtered for different scales. The largest scales are solved for, the smallest sub-filter scales are models
  • RANS: Reynolds Average Navier-Stokes: The Navier-Stokes equations are averaged (over time or realizations), and the non-linear term in the velocity fluctuations (also called Reynolds stress), is modelled, often via some a so-called turbulent viscosity (and by solving additional transport equations for turbulent properties).

Advised reading may be the book by Ferziger and Peric : http://www.amazon.com/Computational-Methods-Fluid-Dynamics-Ferziger/dp/3540420746

  • $\begingroup$ Thank you for the helpful answer (especially the link to the book). $\endgroup$ – Global nomad Apr 10 '12 at 19:49

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.