# As a car turns around a circle, why does the force of static friction point towards the center of the circle [duplicate]

A car moves along a flat, circular road. It has a tangential velocity to the road, but the car tires change direction and the car experiences a force of static friction causing a centripetal acceleration towards the center of the circle. Why does the force push it perpendicular to the direction of the velocity?

Why does the force push it perpendicular to the direction of the velocity?

This is the most intuitive explanation I can think of:

When turning the wheels, the car still wants to continue straight ahead. Because of the inertia, the car is not just stopped but wants to go on forward (the effect is known as the centrifugal effect.)

When you turn the wheels, so they don't follow the motion perfectly anymore, they should slide over the asphalt as the car continues forward. You have then caused a velocity-component perpendicular to the wheels, in which direction they can't turn - they can only slide.

But the car doesn't start sliding and burning your Goodyear rubber tires (it doesn't continue forward without change). Static friction will prevent that. That static friction is pulling in the wheel to oppose that slide (preventing any perpendicular velocity-component) to prevent the car from slipping and sliding.

Be reminded that friction is always something that tries to prevent a motion. It will always act the exact opposite way as the motion/velocity it is trying to stop - in this case, exactly opposite to the perpendicular velocity-component of the wheel.
This introduced static friction will always be perpendicularly to the wheels direction. Any parallel component of this force would have been in the direction of the wheels rotation, and so wouldn't stop or change the motion (but just keeps the wheels rotating).

And acceleration always happens in the direction of the (net) force, $\vec F=m \vec a$.

This is why; the intuitive way.

• The effect is called centrifugal force? Is it an effect or is it a force experienced in the non-inertial frame?
– zeal
Jan 13, 2015 at 14:28
• @zeal The effect, which in everyday speech is known as centrifugal force, is the tendency of an object to move outwards of the orbit. (I cannot answer this for a non-inertial frame.) Jan 13, 2015 at 19:36
• I didn't ask you to answer this for a non-inertial frame. We do a lot of physics in the inertial frame. A rotating object's frame is a non-inertial frame. And centrifugal force appears in this non-inertial frame.
– zeal
Jan 17, 2015 at 8:13
• I have edited to change "centrifugal force" to "centrifugal effect". Using the word "force" is far too misleading, even though it might be common spoken language. Jul 6, 2017 at 16:47

If it's not accelerating in the direction of (forward travel), then it's engine force exactly equals the frictional and aerodynamic losses (constant velocity).

For a given velocity, the forces the tires must exert on the car to keep it in a circle increase to prevent it from 'escaping', and can be visualized by a vector pointing away from the center of the car (the imaginary/'apparent', but sometimes convenient, 'centrifugal' force).

This must be countered by a force 'pulling' the car to the center, centripetal force.

I drew you a picture:

Basically, the key to note here is that the net forces MUST all cancel to zero in all planes, or it's not at a constant velocity. If the front/back forces were unequal in magnitude the car would slow down or speed up in forward velocity; if the tires could not provide the centripetal force to resist flinging out from the circle the car would travel in a straight line or ellipse-style thing depending on the steering wheel, and if they provided additional centripetal force the car would travel in an ellipse style thing starting into the center of the round track.

Note that it's a common practice in certain styles of racing, like F1 cars, to increase aerodynamic drag and use it to push the car harder to the pavement, thereby using some of the stored velocity (force provided from the engine) to increase the coefficient of friction between the tires and the road thus allowing for more centripetal force than gravity would otherwise provide. This makes for interesting scenarios in which some corners can only be taken up to ~50 MPH where aerodynamic forces aren't high enough, but then navigated again at 90-120 MPH (as a loose example) where the added downforce allows the tires to exert more centripetal force on the car.

You first need to know about centrifugal force. Rotating objects experience this apparent force. If you sit on the rotating object you will experience this force but it can not be experienced by an outside observer and as soon as the rotation stops this force vanishes that is why it is called a fictitious force.
In your question the first thing to think is how the car changes its direction to follow a circular path. Its the bending of the front wheels. But if there is no friction between the front wheels and the road but there is between the back wheels and the road, the front wheels would just slip no matter how much it is bent and the car would go straight. To prevent the wheels from slipping and follow the curved path friction between the front wheels and the road is needed. Friction prevents the wheels from slipping and the car to go in the tangential direction. So, the car moves in the direction as given by the bending of the front wheels.
But at the same time the car is rotating. It experiences the centrifugal force that is pushing it directly away from the center of the circular path. So, again friction is the major reason of keeping the car in track. The friction between all the wheels and the road acts opposite to the centrifugal force i.e., towards the center of the circular path. In this way, combining all the things the friction between the wheels and the road does, it helps the car follow a curved path.

• Your's is the best explanation. Thank you! Giving you a plus one.
– Matt
Apr 13, 2017 at 14:59

Anything that tries to go around in a circle, is acted upon by a radial force, which we call the Centrifugal force. This force, being perpendicular to the objects's (here, its your car) velocity, acts in the outward (radial) direction.

Obviously, for the car to go around the circle, there must be some external force to compensate the centrifugal force, in the absence of which, your car will be thrown out (think of a friction-less road/icy road). This force is the frictional force provided by the wheels of your car. Since the centrifugal force is continuously trying to take the car outside, the frictional force (or rather, static frictional force) must continuously act pointing towards the center of the circle (as by defn, frictional force always opposes relative motion bw objects).