I know that this question has been asked many times before, and I have read over several of the threads asking this question, but they do not include the gripe I have with my problem of understanding the difference.

As I understand it, voltage, V, (also called electromotive force, EMF) is essentially the "wanting" of electrons to push away from the negative terminal and to want to go to the positive terminal to eventually balance out the charges and create a net neutral charge. This is done through a conductor, like a wire, between the two terminals. The movement of electrons caused by the attraction of the charge from the negative terminal to positive is the current, I.

Now, as my textbook defines it, voltage is the amount of energy, E, per unit charge, Q. Current is defined as the amount of charge, Q, passing through a point in the circuit in a unit time, t. Current is determined by voltage, as is also stated in Ohm's Law (i.e. if voltage rises/falls, current rises/falls, if resistance remains constant). So then, if energy is lost in a resistor, why does current through the resistor not change? Shouldn't the current go down if energy is lost? Or is it that energy is determined by something within the voltage source (e.g. battery) that is not related to charge?

  • $\begingroup$ voltage is a potential similar to gravitational potential. We use the word potential because such things are capable of doing something to some other object. Energy is not "lost" in a resistor, it just changes form from electric potential energy to heat. Current is a flux of charge density. You can think of it as charge density times the characteristic velocity of the charge carriers. I know that's not as thorough as you would have liked, which is why I only left a comment and not an answer. $\endgroup$ – honeste_vivere Oct 26 '14 at 19:34

ahh, i made this very same question when learning about electricity in high-school

If resistance is the slowing down of electrons and the flow of electrons is the current, why does the current stay the same when passed through a resistor?

The answer (the physics teacher was good) was this:

Indeed a resistor (in a sense) alters the passage of electrons (thus current) through it. For example through collisions of electrons with the (micro-)structure of the resistor material, heat is generated (thus energy changes), electrons are scattered etc etc..

BUT the average speed of the whole electron cloud (which is the current) is not altered in this way.

Note that heat was mentioned, and indeed the resistance of a resistor material is altered depending on temperature (and other parameters).

  • $\begingroup$ So we're talking about the average rate of flow of charge through the circuit, and not the current through each resistor? Is this what you mean when you say, "The average speed of the whole electron cloud is not altered"? And is this what was also explained by @julian_fernandez? $\endgroup$ – Adam Oct 27 '14 at 0:41
  • $\begingroup$ @Adam, current (and other electric concepts) are macroscopic quantities, or in other words some kind of mean values. So in this sense the current (as a macroscopic average) can remain constant while heat is generated in the resistor by the flow of electrons $\endgroup$ – Nikos M. Oct 27 '14 at 2:10
  • $\begingroup$ @Adam, indeed all of electric circuit relations (e.g Ohm's law etc.) can de direved by the electromagnetic equations when taken to a macroscopic limit as appropriate averages, hope this is better $\endgroup$ – Nikos M. Oct 27 '14 at 2:15

What you could say is "if energy is lost in a resistor, then why doesn't the velocity of the charged particles increase, as per Work-Energy theorem?". So your question should really go something like "Why doesnt current which is $Q/t$ increase if the velocity will increase after voltage drops"?

The answer to this is that we assume all potential energy lost, is again lost due to inner collisions with other atoms, and that's why materials heat up! Also, this implies a steady current because the drift velocity will not be changing.


It can be shown that $F\Delta x= \Delta KE$ this means that a force acting on some distance will produce a change in kinetic energy. You can imagine an electric field where the work done by it is simply $W= qE\Delta x$. By the way notice that if I were to divide that expression by the charge $q$ I would obtain the voltage across the thing i'm concerned with. Namely $V=E\Delta x$.

So in summary, if I do some work, then I have some change in kinetic energy. If there is a voltage drop, it follows that positive work was done and kinetic energy increased, which means a velocity increment.

Across a resistor there is a voltage drop. So why isn't it that charged particles are going faster and then I can measure a current increase? Well that's due to the explanation I gave above my edit portion. Namely, that all that increase in kinetic energy is absorbed due to collisions with the neighboring atoms.

By the way, if you're curious enough to visit this website, I suggest you look up a video on Work-Energy theorem on youtube. This concept is pretty straightforward and I'm sure you can understand it.

  • $\begingroup$ The Work-Energy Theorem never came up in class, so I'm not too familiar with the concept. If you don't mind, could you give me the TL;DR of it so I can follow your explanation? It seems to make a little more sense to me this way. $\endgroup$ – Adam Oct 26 '14 at 20:01
  • $\begingroup$ Sure I'll do it in a while. $\endgroup$ – DLV Oct 26 '14 at 21:20
  • $\begingroup$ There, I've added it. $\endgroup$ – DLV Oct 26 '14 at 21:26
  • $\begingroup$ If the edit portion wasn't helpful, I'd be glad to offer more help. $\endgroup$ – DLV Oct 26 '14 at 23:47
  • $\begingroup$ So if I understand this correctly, the reason for a consistent current through a resistor is because of the collision of electrons in the resistor, which changes the kinetic energy into heat, thus keeping the current consistent despite the voltage drop which would cause an increase in current. Did I get that right? $\endgroup$ – Adam Oct 27 '14 at 0:27

What the resistor indeed does is to "slow down" the current. The more resistors you put the smaller the current (the current drops). If there were no resistor you would not have any voltage drop and assuming the wire does not have resistance, you will have a short circuit (maximum current flow). The circuit equations for a resistor already take into account that the current will be slowed down by it and that there will be a drop of voltage across (ohm's law), so no extra reductions will need to be considered.So, you are basically right, unless there is some part of your question that I do not understand.

  • $\begingroup$ "current do not change because a resistor does not accumulate charge" That's where I get confused. The potential difference determines the amount of current, as far as I understand it, therefore why doesn't the current drop after each resistor if the voltage also drops due to the loss of energy? If energy drops, then there would be less "push" on the electrons, therefore less current, no? Or am I missing something from this? $\endgroup$ – Adam Oct 26 '14 at 19:57
  • $\begingroup$ I edited my question because the explanation was not really clear. $\endgroup$ – Wolphram jonny Oct 26 '14 at 20:10
  • $\begingroup$ This doesn't really directly answer my question, although it puts some things into better perspective so I thank you for that. My issue is that voltage drops across each resistor, but current stays the same through that same resistor. But if voltage is the push on electrons due to the energy of the charges, and current is dependent on voltage, then why doesn't current also drop along with voltage? I hope I am clearer in my question. $\endgroup$ – Adam Oct 27 '14 at 0:32
  • $\begingroup$ what do you mean that voltage drops and current stays the same? the same before putting the resistor? That is not so, without any resistor the voltage doesn't drop and the current is theoretically infinite (in practice there is always resistance, even if small, on both the wires and inside the battery) $\endgroup$ – Wolphram jonny Oct 27 '14 at 2:05
  • $\begingroup$ when you add the resistor both the voltage drops and the current diminish $\endgroup$ – Wolphram jonny Oct 27 '14 at 2:06

Simple answer is that charge is a quantity that is conserved.

It is the voltage dropped across the resistor that changes (in a series circuit) not the current. Current is constant in all parts of a series circuit.

No electrons 'escape' from the circuit so the same amount return (at the same rate) to the negative terminal of the source as leave its positive terminal (conventional current assumed)


Think of electrons as balls that go very close to each other, if in front of some electrons there is resistance, which takes their kinetic energy (slow down), then the rear ones will slow down, so the current (the number of charges over time) on the whole circuit is the same.enter image description here


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.