6
$\begingroup$

Recently I have had ideas of how to build a spectroscope, but I'm not sure if it will work. As can be seen in the diagram, the experiment is simple: it consists of a laser that generates the light that passes over a gas in a closed tube sample and the light goes straight into a prism which, according to one of the most basic laws of physics, decompose light. If you can share your thoughts about my project, if it will work, if it is efficient or other issues, I appreciate it. Felipe

enter image description here

$\endgroup$
1
  • $\begingroup$ That could work for some methods of spectroscopy. An arc lamp would be better for the light source though. (I think.) I would suggest reading the answers to my question, and decide what to do from there. physics.stackexchange.com/q/137317 $\endgroup$
    – CoilKid
    Sep 30, 2014 at 22:29

3 Answers 3

10
$\begingroup$

Lasers by definition only emit a single wavelength of light. You use one if you want that wavelength or if you want your photons to be in phase. You don't care about the photon phases, and you want to sample all wavelengths, so a laser is very much the wrong tool. If you just want collimation of the light, mirrors, lenses, or even just well-separated apertures can accomplish that.

To see the absorption spectrum, shine any continuum light source at the gas. Note that this is not the same as "white" light, since many modern lightbulbs imitate white by emitting only a few select wavelengths. An incandescent light will work well.

Note also that any particular wavelength photon will have a chance of passing through the sample and a chance of being absorbed. As you make the column density of material larger (use a longer path through the sample or increase its density) the photons that "should" be absorbed will in fact be absorbed with higher probability. In other words, this will make your spectral features more clear.

Finally, narrow absorption lines can be difficult to see by eye (imperfect optics blur the image, etc.). Emission lines are easier. Practice taking spectra of emission sources: monitors, non-incandescent bulbs, salts thrown into a flame, etc.

$\endgroup$
0
7
$\begingroup$

To follow the information in Chris White's answer - essentially, you would want a medium that allows you to see the spectra.

There are several online resources that could help you in this experiment, in particular, the CD spectrometer, which can be constructed simply and on that website, it shows several examples of how everyday light sources can be visualised. A similar set of instructions can be found here.

A diagram of the CD spectrometer is:

enter image description here

Image source

Another example that potentially yields more interesting quantifiable results is detailed in Discover the Hidden Colors in Everyday Objects with This DIY Video Spectrometer, which uses the following process (from the website):

enter image description here

$\endgroup$
2
  • 1
    $\begingroup$ @Felipehamm for what it's worth, I have successfully been able to do both with ease and virtually no expense. $\endgroup$
    – user60063
    Oct 1, 2014 at 0:57
  • $\begingroup$ Yes, actually i'm gonna try to do one of these for my science fair project! $\endgroup$
    – Felipehamm
    Oct 1, 2014 at 1:04
0
$\begingroup$

The experiment could work if only the gas inside the spectre would be thin enough to let the light through. If the gas is thick then it wold block some of the light making it flicker.

$\endgroup$

Not the answer you're looking for? Browse other questions tagged or ask your own question.