Timeline for Circular waveguide excitationfor TE11 coefficients
Current License: CC BY-SA 4.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 21, 2023 at 23:56 | comment | added | hyportnex | The length of the launcher will only effect the input VSWR on the coax line but not the mode picture. Just make sure that the radius of the waveguide allows only the TE11 mode to propagate and you measure the field distribution at least three or more wavelengths away from the launcher. | |
| May 21, 2023 at 23:52 | comment | added | hyportnex | if you excite the mode with a midplane radial launcher then in the TE11, n=1 mode depending on the setup of your coordinate system either $\cos\phi$ or $\sin\phi$ but not the other will couple to it strongly and the other will have much smaller amplitude. In your simulation, you should probably add a backshort a quarter wavelength from the launcher or drive the waveguide symmetrically in both directions. | |
| May 21, 2023 at 19:09 | comment | added | hyportnex | A and B are proportional to the amplitude of the excitation, so vary it. | |
| May 21, 2023 at 18:29 | history | edited | Qmechanic♦ | CC BY-SA 4.0 |
deleted 6 characters in body; edited title
|
| May 21, 2023 at 18:19 | history | asked | lub2354 | CC BY-SA 4.0 |