Skip to main content
added 60 characters in body
Source Link

$\{ e_i \}$ is an orthonormal basis which has the orthonormal condition as following $$ e^T_i \cdot e_j = \delta_{ij} $$

Not quite. The reason I say this because this statement isn't the most general statement you could make about orthonormal bases for vector spaces (or at least it's not precise enough)


At any rate, the correct general statement is as follows.

Let $\{ e_i\}$ be a discrete (possibly infinite) orthonormal basis for a complex vector space $V$ equipped with an inner product " $\cdot$ ". Then, for any $i,j$ we have that

$$ e_i \cdot e_j = \delta_{ij}. \tag{a} $$

Wait a second. Shouldn't that be $(e_i^*)^T \cdot e_j$? No, and this is because the " $\cdot$" denotes an inner product between two vectors $v, w$---whatever that may be. That is, the dot does not refer to matrix multiplication necessarily, but rather refers to the inner product between two vectors $v,w\in V$, which is a more abstract notion than matrix multiplication.


Note that the case $[e_i]^T \cdot [e_j] = \delta_{ij}$ is a special case of (1) when we are representing the basis vectors in a matrix representation and (2) when it is a real vector space, since then $e_i^\dagger = e_i$ (in the abstract sense, not the matrix sense--if you find this notation confusing don't worry it is, which is why Dirac notation better as it distinguishes between vectors and their "dual"). It’s precisely when both (1) and (2) are true that

$$e_i \cdot e_j\ \dot{=} \ [e_i]^T \cdot [e_j] = \delta_{ij}$$

where the square brackets explicitly denote the matrix representation of the basis vectors, and the $\dot{=}$ means "is represented by".


Lastly, Dirac notation is just the notational change

\begin{align} & e_i \to | e_i \rangle\\ & e_i^\dagger \to \langle e_i|\\ & v \cdot w \to \langle v |w \rangle. \tag{b} \end{align}

Note that in pure mathematics, another common notation for $(b)$ is $v\cdot w \to \langle v, w \rangle$. While this notation is better than the dot-notation, Dirac notation is, in my opinion still better for any purpose I can readily think of.

$\{ e_i \}$ is an orthonormal basis which has the orthonormal condition as following $$ e^T_i \cdot e_j = \delta_{ij} $$

Not quite. The reason I say this because this statement isn't the most general statement you could make about orthonormal bases for vector spaces (or at least it's not precise enough)


At any rate, the correct general statement is as follows.

Let $\{ e_i\}$ be a discrete (possibly infinite) orthonormal basis for a complex vector space $V$ equipped with an inner product " $\cdot$ ". Then, for any $i,j$ we have that

$$ e_i \cdot e_j = \delta_{ij}. \tag{a} $$

Wait a second. Shouldn't that be $(e_i^*)^T \cdot e_j$? No, and this is because the " $\cdot$" denotes an inner product between two vectors $v, w$---whatever that may be. That is, the dot does not refer to matrix multiplication necessarily, but rather refers to the inner product between two vectors $v,w\in V$, which is a more abstract notion than matrix multiplication.


Note that the case $[e_i]^T \cdot [e_j] = \delta_{ij}$ is a special case of (1) when we are representing the basis vectors in a matrix representation and (2) when it is a real vector space, since then $e_i^\dagger = e_i$ (in the abstract sense, not the matrix sense--if you find this notation confusing don't worry it is, which is why Dirac notation better as it distinguishes between vectors and their "dual"). It’s precisely when both (1) and (2) are true that

$$e_i \cdot e_j\ \dot{=} \ [e_i]^T \cdot [e_j] = \delta_{ij}$$

where the square brackets explicitly denote the matrix representation of the basis vectors, and the $\dot{=}$ means "is represented by".


Lastly, Dirac notation is just the notational change

\begin{align} & e_i \to | e_i \rangle\\ & e_i^\dagger \to \langle e_i|\\ & v \cdot w \to \langle v |w \rangle. \tag{b} \end{align}

$\{ e_i \}$ is an orthonormal basis which has the orthonormal condition as following $$ e^T_i \cdot e_j = \delta_{ij} $$

Not quite. The reason I say this because this statement isn't the most general statement you could make about orthonormal bases for vector spaces (or at least it's not precise enough)


At any rate, the correct general statement is as follows.

Let $\{ e_i\}$ be a discrete (possibly infinite) orthonormal basis for a complex vector space $V$ equipped with an inner product " $\cdot$ ". Then, for any $i,j$ we have that

$$ e_i \cdot e_j = \delta_{ij}. \tag{a} $$

Wait a second. Shouldn't that be $(e_i^*)^T \cdot e_j$? No, and this is because the " $\cdot$" denotes an inner product between two vectors $v, w$---whatever that may be. That is, the dot does not refer to matrix multiplication necessarily, but rather refers to the inner product between two vectors $v,w\in V$, which is a more abstract notion than matrix multiplication.


Note that the case $[e_i]^T \cdot [e_j] = \delta_{ij}$ is a special case of (1) when we are representing the basis vectors in a matrix representation and (2) when it is a real vector space, since then $e_i^\dagger = e_i$ (in the abstract sense, not the matrix sense--if you find this notation confusing don't worry it is, which is why Dirac notation better as it distinguishes between vectors and their "dual"). It’s precisely when both (1) and (2) are true that

$$e_i \cdot e_j\ \dot{=} \ [e_i]^T \cdot [e_j] = \delta_{ij}$$

where the square brackets explicitly denote the matrix representation of the basis vectors, and the $\dot{=}$ means "is represented by".


Lastly, Dirac notation is just the notational change

\begin{align} & e_i \to | e_i \rangle\\ & e_i^\dagger \to \langle e_i|\\ & v \cdot w \to \langle v |w \rangle. \tag{b} \end{align}

Note that in pure mathematics, another common notation for $(b)$ is $v\cdot w \to \langle v, w \rangle$. While this notation is better than the dot-notation, Dirac notation is, in my opinion still better for any purpose I can readily think of.

added 60 characters in body
Source Link

$\{ e_i \}$ is an orthonormal basis which has the orthonormal condition as following $$ e^T_i \cdot e_j = \delta_{ij} $$

Not quite. The reason I say this because this statement isn't the most general statement you could make about orthonormal bases for vector spaces (or at least it's not precise enough)


At any rate, the correct general statement is as follows.

Let $\{ e_i\}$ be a discrete (possibly infinite) orthonormal basis for a complex vector space $V$ equipped with an inner product " $\cdot$ ". Then, for any $i,j$ we have that

$$ e_i \cdot e_j = \delta_{ij}. \tag{a} $$

Wait a second. Shouldn't that be $(e_i^*)^T \cdot e_j$? No, and this is because the " $\cdot$" denotes an inner product between two vectors $v, w$---whatever that may be. That is, the dot does not refer to matrix multiplication necessarily, but rather refers to the inner product between two vectors $v,w\in V$, which is a more abstract notion than matrix multiplication.


Note that the case $[e_i]^T \cdot [e_j] = \delta_{ij}$ is a special case of (1) when we are representing the basis vectors in a matrix representation and (2) when it is a real vector space, since then $e_i^\dagger = e_i$ (in the abstract sense, not the matrix sense--if you find this notation confusing don't worry it is, which is why Dirac notation better as it distinguishes between vectors and their "dual"). It’s precisely when both (1) and (2) are true that

$$e_i \cdot e_j\ \dot{=} \ [e_i]^T \cdot [e_j] = \delta_{ij}$$

where the square brackets explicitly denote the matrix representation of the basis vectors, and the $\dot{=}$ means "is represented by".


Lastly, Dirac notation is just the notational change

\begin{align} & e_i \to | e_i \rangle\\ & e_i^\dagger \to \langle e_i|\\ & v \cdot w \to \langle v |w \rangle. \tag{b} \end{align}

$\{ e_i \}$ is an orthonormal basis which has the orthonormal condition as following $$ e^T_i \cdot e_j = \delta_{ij} $$

Not quite. The reason I say this because this statement isn't the most general statement you could make about orthonormal bases for vector spaces (or at least it's not precise enough)


At any rate, the correct general statement is as follows.

Let $\{ e_i\}$ be a discrete (possibly infinite) orthonormal basis for a complex vector space $V$ equipped with an inner product " $\cdot$ ". Then, for any $i,j$ we have that

$$ e_i \cdot e_j = \delta_{ij}. \tag{a} $$

Wait a second. Shouldn't that be $(e_i^*)^T \cdot e_j$? No, and this is because the " $\cdot$" denotes an inner product between two vectors $v, w$---whatever that may be. That is, the dot does not refer to matrix multiplication necessarily, but rather refers to the inner product between two vectors $v,w\in V$.


Note that the case $[e_i]^T \cdot [e_j] = \delta_{ij}$ is a special case of (1) when we are representing the basis vectors in a matrix representation and (2) when it is a real vector space, since then $e_i^\dagger = e_i$ (in the abstract sense, not the matrix sense--if you find this notation confusing don't worry it is, which is why Dirac notation better as it distinguishes between vectors and their "dual"). It’s precisely when both (1) and (2) are true that

$$e_i \cdot e_j\ \dot{=} \ [e_i]^T \cdot [e_j] = \delta_{ij}$$

where the square brackets explicitly denote the matrix representation of the basis vectors, and the $\dot{=}$ means "is represented by".


Lastly, Dirac notation is just the notational change

\begin{align} & e_i \to | e_i \rangle\\ & e_i^\dagger \to \langle e_i|\\ & v \cdot w \to \langle v |w \rangle. \tag{b} \end{align}

$\{ e_i \}$ is an orthonormal basis which has the orthonormal condition as following $$ e^T_i \cdot e_j = \delta_{ij} $$

Not quite. The reason I say this because this statement isn't the most general statement you could make about orthonormal bases for vector spaces (or at least it's not precise enough)


At any rate, the correct general statement is as follows.

Let $\{ e_i\}$ be a discrete (possibly infinite) orthonormal basis for a complex vector space $V$ equipped with an inner product " $\cdot$ ". Then, for any $i,j$ we have that

$$ e_i \cdot e_j = \delta_{ij}. \tag{a} $$

Wait a second. Shouldn't that be $(e_i^*)^T \cdot e_j$? No, and this is because the " $\cdot$" denotes an inner product between two vectors $v, w$---whatever that may be. That is, the dot does not refer to matrix multiplication necessarily, but rather refers to the inner product between two vectors $v,w\in V$, which is a more abstract notion than matrix multiplication.


Note that the case $[e_i]^T \cdot [e_j] = \delta_{ij}$ is a special case of (1) when we are representing the basis vectors in a matrix representation and (2) when it is a real vector space, since then $e_i^\dagger = e_i$ (in the abstract sense, not the matrix sense--if you find this notation confusing don't worry it is, which is why Dirac notation better as it distinguishes between vectors and their "dual"). It’s precisely when both (1) and (2) are true that

$$e_i \cdot e_j\ \dot{=} \ [e_i]^T \cdot [e_j] = \delta_{ij}$$

where the square brackets explicitly denote the matrix representation of the basis vectors, and the $\dot{=}$ means "is represented by".


Lastly, Dirac notation is just the notational change

\begin{align} & e_i \to | e_i \rangle\\ & e_i^\dagger \to \langle e_i|\\ & v \cdot w \to \langle v |w \rangle. \tag{b} \end{align}

added 334 characters in body
Source Link

$\{ e_i \}$ is an orthonormal basis which has the orthonormal condition as following $$ e^T_i \cdot e_j = \delta_{ij} $$

Not quite. The reason I say this because this statement isn't the most general statement you could make about orthonormal bases for vector spaces (or at least it's not precise enough)


At any rate, the correct general statement is as follows.

Let $\{ e_i\}$ be a discrete (possibly infinite) orthonormal basis for a complex vector space $V$ equipped with an inner product " $\cdot$ ". Then, for any $i,j$ we have that

$$ e_i \cdot e_j = \delta_{ij}. \tag{a} $$

Wait a second. Shouldn't that be $(e_i^*)^T \cdot e_j$? No, and this is because the " $\cdot$" denotes an inner product between two vectors $v, w$---whatever that may be. That is, the dot does not refer to matrix multiplication necessarily, but rather refers to the inner product between two vectors $v,w\in V$.


Note that the case you cited $(e_i)^T \cdot e_j = \delta_{ij}$$[e_i]^T \cdot [e_j] = \delta_{ij}$ is a special case of (1) when we are representing the basis vectors in a matrix representation and (2) when it is a real vector space, since then $e_i^\dagger = (e_i)^T$$e_i^\dagger = e_i$ (in the abstract sense, not the matrix sense--if you find this notation confusing don't worry it is, which is why Dirac notation better as it distinguishes between vectors and their "dual"). It’s precisely when both of these(1) and (2) are true that

$$e_i \cdot e_j = [e_i]^T \cdot [e_j] = \delta_{ij}$$$$e_i \cdot e_j\ \dot{=} \ [e_i]^T \cdot [e_j] = \delta_{ij}$$

where the square brackets explicitly denote the matrix representation of the basis vectors, and the $\dot{=}$ means "is represented by".


Lastly, Dirac notation is just the notational change

\begin{align} & e_i \to | e_i \rangle\\ & e_i^\dagger \to \langle e_i|\\ & v \cdot w \to \langle v |w \rangle. \tag{b} \end{align}

$\{ e_i \}$ is an orthonormal basis which has the orthonormal condition as following $$ e^T_i \cdot e_j = \delta_{ij} $$

Not quite. The reason I say this because this statement isn't the most general statement you could make about orthonormal bases for vector spaces (or at least it's not precise enough)


At any rate, the correct general statement is as follows.

Let $\{ e_i\}$ be a discrete (possibly infinite) orthonormal basis for a complex vector space $V$ equipped with an inner product " $\cdot$ ". Then, for any $i,j$ we have that

$$ e_i \cdot e_j = \delta_{ij}. \tag{a} $$

Wait a second. Shouldn't that be $(e_i^*)^T \cdot e_j$? No, and this is because the " $\cdot$" denotes an inner product between two vectors $v, w$---whatever that may be. That is, the dot does not refer to matrix multiplication necessarily, but rather refers to the inner product between two vectors $v,w\in V$.


Note that the case you cited $(e_i)^T \cdot e_j = \delta_{ij}$ is a special case of (1) when we are representing the basis vectors in a matrix representation and (2) when it is a real vector space, since then $e_i^\dagger = (e_i)^T$. It’s precisely when both of these are true that

$$e_i \cdot e_j = [e_i]^T \cdot [e_j] = \delta_{ij}$$


Lastly, Dirac notation is just the notational change

\begin{align} & e_i \to | e_i \rangle\\ & e_i^\dagger \to \langle e_i|\\ & v \cdot w \to \langle v |w \rangle. \tag{b} \end{align}

$\{ e_i \}$ is an orthonormal basis which has the orthonormal condition as following $$ e^T_i \cdot e_j = \delta_{ij} $$

Not quite. The reason I say this because this statement isn't the most general statement you could make about orthonormal bases for vector spaces (or at least it's not precise enough)


At any rate, the correct general statement is as follows.

Let $\{ e_i\}$ be a discrete (possibly infinite) orthonormal basis for a complex vector space $V$ equipped with an inner product " $\cdot$ ". Then, for any $i,j$ we have that

$$ e_i \cdot e_j = \delta_{ij}. \tag{a} $$

Wait a second. Shouldn't that be $(e_i^*)^T \cdot e_j$? No, and this is because the " $\cdot$" denotes an inner product between two vectors $v, w$---whatever that may be. That is, the dot does not refer to matrix multiplication necessarily, but rather refers to the inner product between two vectors $v,w\in V$.


Note that the case $[e_i]^T \cdot [e_j] = \delta_{ij}$ is a special case of (1) when we are representing the basis vectors in a matrix representation and (2) when it is a real vector space, since then $e_i^\dagger = e_i$ (in the abstract sense, not the matrix sense--if you find this notation confusing don't worry it is, which is why Dirac notation better as it distinguishes between vectors and their "dual"). It’s precisely when both (1) and (2) are true that

$$e_i \cdot e_j\ \dot{=} \ [e_i]^T \cdot [e_j] = \delta_{ij}$$

where the square brackets explicitly denote the matrix representation of the basis vectors, and the $\dot{=}$ means "is represented by".


Lastly, Dirac notation is just the notational change

\begin{align} & e_i \to | e_i \rangle\\ & e_i^\dagger \to \langle e_i|\\ & v \cdot w \to \langle v |w \rangle. \tag{b} \end{align}

added 9 characters in body; edited body
Source Link
Loading
added 4 characters in body; added 96 characters in body
Source Link
Loading
deleted 2 characters in body
Source Link
Loading
Source Link
Loading