The product of the force on an object and the displacement the object undergoes along the direction of the force.

learn more… | top users | synonyms

-2
votes
0answers
14 views

Work Numerical (Std VII) [on hold]

A 1 kg ball is thrown up with a speed of 9.9 m/s. Calculate the work done by its weight in 1 second.(Acceleration due to gravity = 10ms-2) I am a student of standard seven. I will be very ...
0
votes
1answer
44 views

Work and chemical energy “paradox”

This is a mistake I've seen many people make, a few physicists included, but I haven't ever seen a satisfactory explanation for what's going on. Apologies for the lengthy setup. Setup Suppose I ...
0
votes
2answers
210 views

Is work done in rolling friction?

I am confused by rolling friction. Suppose you have a cylinder rolling which starts at rest at the top of an incline plane and begins to roll down the plane without slipping. Is work done by the ...
1
vote
1answer
48 views

On the work done by friction

The work done by friction is often calculated just as we would with any force. If we give a block of mass $m$ a velocity $v$ on a rough surface and it comes to rest after traversing a distance $x$, ...
5
votes
5answers
1k views

Kinetic energy vs. momentum?

As simple as this question might seem, I failed to intuitively answer it. Let's assume there is a $10,000$ $kg$ truck moving at $1$ $m/s$, so its momentum and KE are: $p=10,000$ $kg.m/s$ and ...
5
votes
1answer
55 views

Does an opposing force cause loss/ waste of energy?

I found this answer by John Rennie (in the question you see the train on a track): when the train moves a distance $d$ the work done on the train is $Fd\cos\theta$. It's certainly true that ...
2
votes
1answer
40 views

Work in gravitational field

I was doing a test a few days ago and there was a fairly simple task involving gravity basics. The task asks me to calculate the work done by moving an Earth's artificial satellite from a stationary ...
0
votes
0answers
25 views

Work done by a gas in an expansion [duplicate]

1) Consider a gas expanding quasistatically and reversibly from $V_1$ to $V_2$ at constant temperature. I want to calculate the work done. So by convention work done by a system is a negative quantity ...
2
votes
2answers
45 views

How can tangential acceleration from a radial force be explained?

A mass is attached to a rope, and put into a circular motion. If I pull the string from the center, the tangential speed of the mass will increase (by conservation of angular momentum). I am ...
0
votes
2answers
106 views

Work and Free Body Diagrams

I am a bit confused with how to find work when there is a free body diagram. I am trying to work out this problem, and in it a box is being pulled at a constant speed by a rope at a constant angle ...
3
votes
4answers
1k views

Can internal forces do work?

My Mechanics textbook claims that the sum of the work by internal forces is not generally zero. translated to English the paragraph reads: Notice about the work by internal forces: the work by ...
4
votes
3answers
621 views

Work = Force x Distance vs Displacement

The difference in using Distance vs Displacement is demonstrated in this example: Work = Force x Distance If I carry an object to and fro 10 metres, the work done would be Force x 20 metres. ...
0
votes
2answers
230 views

Why does the coefficient of performance need to be calculated with $W + Q$?

How much work must a heat pump with a COP of 2.50 do in order to extract 1.00 MJ of thermal energy from the outdoors (the cold reservoir)? The first formula that came into my mind after reading ...
1
vote
1answer
43 views

A captious work problem: same paths but same forces?

A man jumps onto a chair. A man climbs onto a chair by putting a leg first and then the other. In both cases, the work has been the same. TRUE or FALSE...? Spoiler!: The path is the same, so the ...
0
votes
1answer
50 views

Efficiency of an electric motor? [closed]

Question: An electric motor runs off a 12V d.v. supply and has an overall efficiency of 75%. Calculate how much electric charge will pass through the motor when it does 90J of work. Can someone tell ...
3
votes
3answers
390 views

Why can't a magnet change a charged particle's speed?

I know that magnetic force acts perpendicular to the direction of the original velocity, so the velocity in that original direction is unchanged, but once the magnet starts acting, the particle's ...
0
votes
1answer
67 views

Why does the gravitation potential in a uniform field have negative values?

As we know the gravitational potential is the work done per unit mass in taking a point mass from zero potential (at infinity distance) to a point in a gravitational field. But why is the work ...
0
votes
2answers
42 views

Gravitational potential difference

in my revision guide it defines gravitational potential difference as: The gravitational potential difference is work done in moving a unit mass. It then goes on to explain the gravitational ...
0
votes
3answers
26 views

Dealing with negative work

Dumb question, I'm working with vector fields right now, and one question on here tells me to assume an object can take on three paths from a to b. (paths not listed here) for times in [0,1] Now ...
1
vote
4answers
52 views

The amount of potential energy at the height of h [duplicate]

When we lift an object upwards with a constant velocity for a distance of $ h $ the work that we've done is $mgh$ and the work done by the force of gravity is $-mgh$. So the net work on the object is ...
1
vote
1answer
43 views

Rigid body: internal work null?

I am following an elementary physics course book, namely W.E. Gettys, F.J. Keller and M.J. Skove's Physics (in an Italian translation). In exercises where no non-conservative force acts on a rigid ...
1
vote
1answer
128 views

Potential Energy of Springs and Gravity, and Work of a force

I am currently really stuck on this problem and I am not sure how to actually solve it, I think I can reason it out logically but I do not know how to show it. Here it is and under I will show what I ...
2
votes
2answers
64 views

Work done by frictional force on a sliding block

A block slides across a table horizontally with an initial velocity $V$. The frictional force $F$ brings it to rest after its Centre of Mass covers distance $S$. What is the work done by the ...
0
votes
2answers
1k views

Finding maximum speed in a work-energy problem [closed]

I have the following problem: The Royal Gorge bridge over the Arkansas River is $310\text{ m}$ above the river. A $57\text{ kg}$ bungee jumper has an elastic cord with an unstressed length of ...
1
vote
3answers
74 views

Work-Energy conservation with friction

I didn't go to the lesson of work-energy theorem, so I miss something about this subject. I know the formulas, but I can't figure it out. This question has many quantities. Here is the problem, ...
4
votes
5answers
2k views

Is there work being done if no displacement occurs?

So the definition of work is $W = \vec{F}\cdot\vec{s}$. Say I have a point mass which is being pushed on both sides by equal forces and therefore does not move. Does this mean that no work is being ...
1
vote
1answer
22 views

Deriving the equation for the speed of a block down an incline using work - keep getting the wrong constant

So the question is: There is a block of mass $m$ travelling along an incline that makes an angle $\theta$ with the horizontal. If the block is pushed up the incline with an initial velocity $v_o$, ...
0
votes
2answers
560 views

How to calculate work when a block is moving with constant velocity?

How to calculate work when a block is moving with constant velocity? As we know $f=ma$, and for constant velocity $a=0$, so $f=0$ and $w=fs=0$? Can anybody make it clear?
0
votes
3answers
38 views

When moving from one position to another at a constant velocity, how does the conservation of energy hold?

I know that this might be a duplicate question, but I have not found any satisfactory answers that clear up my lack of understanding. Here is my question. Say a sloth hangs on a tree in the middle of ...
2
votes
2answers
15k views

What is the relationship between Force and Kinetic Energy?

I am an Middle-School (Grade 8) student, who is self-learning classical mechanics. I saw this equation from Classical Mechanics: $\vec F=m \vec a$, the following equation is pretty straight forward ...
0
votes
1answer
67 views

Normal force, work and conservativity

I have searched very much on line, both in this site and elsewhere, but found no proof of whether the normal force is conservative or is not, in general. Clearly, if the force is orthogonal to the ...
0
votes
3answers
50 views

How much work do I need to convert 300ml of water from 25°C to 3°C? [closed]

A question on how to apply thermodynamics principles to figure out how much work is needed to hold 300ml water in room temperature at 3°C. So far I have: 1Cal for each degree per g of water. We have ...
2
votes
2answers
67 views

Lack of rigour in usual derivation of Work-Energy Theorem

The derivation of the Work-Energy theorem usually goes as follows: You define the work done on a particle under net force $\vec{F}$ as $$W=\int\limits_C \vec{F}\cdot\mathrm{d}\vec{r}$$ And then you ...
0
votes
3answers
38 views

Work and energy

when a ball of mass m is brought with uniform velocity from infinity into the g field of the earth at a distance r from it, the potential energy of the ball earth system decreases from 0 to -GMm/r. ...
3
votes
3answers
18k views

Why work is a scalar and not a vector?

Work (in physics) is a scalar, but why? And why not a vector?
2
votes
5answers
222 views

How can static friction do work?

By definition, the work done by a force is $W = F\cdot d$, so how can static friction do work? Can this force move the body a distance of $75~\text{m}$?
2
votes
1answer
151 views

How did Feynman prove that energy cannot be extracted from electric field?

In the Feynman Lectures, vol. II, chapter 4, Feynman discusses electric potential and says: If we carry a charge from point $a \to b$, $$W = -\int_{a}^{b} \mathbf{F} \cdot ds.$$ Now, in general, ...
0
votes
1answer
56 views

Help calculating work done by stretching a wire [closed]

A wire of length 0.89 m and cross-sectional area 1.7 cm2 is stretched elastically by an amount 1.2 cm. By Hooke’s law, the restoring force is $−k\Delta L$. Calculate the work done in ...
0
votes
1answer
70 views

Work done by friction on car

David Morin, in "Introduction to Classical Mechanics" says that friction does not exert a force on a car because the ground is fixed but that KE of the car is changing to internal kinetic energy in ...
0
votes
0answers
21 views

Constant 2 in kinetic energy equation [duplicate]

Trying to understand where the constant 2 comes from in the kinetic energy equation, $mv^2/2$. Why 2 and not another number?
2
votes
5answers
311 views

when an object is lifted (at a constant velocity) shouldn't the work done on the object be zero? [duplicate]

When I lift an object from the ground (at a constant velocity) I'm applying force on the object equal to its weight and the earth is also pulling it downwards with equal amounts of force. So if the ...
2
votes
4answers
119 views

If velocity is constant, how can $p = F\cdot v$ be non zero?

If an airplane of mass $m$ is flying at a constant speed $v$, the power of the airplane is $$P = m\cdot v\cdot g $$ where $g$ is the acceleration of gravity and therefore: $$ F = m\cdot g, $$ but, ...
1
vote
2answers
52 views

Why am I getting that work it's always the same in both directions?

I'm studying electrostatic and I'm getting pretty frustrated because with the definition of work I'm getting that it's always positive and it doesn't make any sense. So here I have 2 positive ...
4
votes
1answer
52 views

Relativity of Work

Let's say there is a man pushing a wall with a force of $-1 \text N$, and moving it $0 \text m$. Since $W = F \cdot d$, he has done $0\text J$ of work on the wall. Another man is pushing a duck with ...
6
votes
3answers
653 views

Why should Conservative forces have their curl equal to zero?(intuition)

There are several conditions that must be met in order for a force to be conservative. One of them is that the curl of that force must be equal to zero? What is the physical intuition behind this? If ...
1
vote
6answers
6k views

Workdone in an equipotential surface is zero?

An equipotential surface is one in which all the points are at the same electric potential. If a charge is to be moved between any two points (say from point A to point B) on an equipotential surface, ...
0
votes
1answer
39 views

The concept of displacement in definition of work

Suppose an ideal spring is attached to a wall at one of its end. Let an external force act on the spring at another end to stretch the spring to distance $x$. If spring constant is $k$ then work done ...
0
votes
2answers
117 views

Why is the potential energy for a body raised up by a height negative?

I tried deriving the potential energy of a body when raised at a height $h$ above the earths surface, using the formula: $$PE = -W_\text{conservative}$$ where $W_\text{conservative}$ is the work ...
0
votes
2answers
203 views

Force vs. impulse: what is the math description of their interaction?

In this image there are two forces acting on the same body, and we can decribe them mathematically and geometrically using vectors and the palallelogram rule. NOw, suppose the box (stone, ...
0
votes
1answer
104 views

When to use h = Cp∆T or u = Cv∆T

I'm getting myself confused on when to use h = cp∆T or u = cv∆T where cp is the specific ...