# Tagged Questions

15 views

### Find acceleration along normal and tangent [on hold]

A small block can move in a straight horizontal line a along AB. Flash lights from one side projects its shadow on a vertical wall which has horizontal cross section as a circle. Find tangential & ...
157 views

### Is there a mistake in this example in my mechanics textbook?

This is a worked example in my mechanics book: But I think this worked example is wrong. In the 6th line. shouldn't $X=4R$ as the expression for distance above the surface is $(X-R)$ and when the ...
807 views

### Number of planks required to stop the bullet [closed]

A bullet looses (1/n)th of its velocity passing through one plank. The number of such planks that are required to stop the bullet can be? Logically, to me the answer seems to be infinity, as always a ...
231 views

### Why do two equal-and-opposing forces each do work on a moving object but not on a stationary object?

Consider a point-mass $m$ having constant velocity but undergoing influence from two forces, $F_1$, $F_2$, having equal magnitude but opposite directions. Because the forces' magnitudes are equal, I ...
1k views

### In calculating work done by a constant force over a constant distance, why doesn't the subject's initial velocity matter?

Assume a point-mass $m$ is travelling in a straight line, and a force $F$ will act on $m$ (in the same direction as $m$'s velocity) over a constant distance $d$; why doesn't $m$'s velocity matter to ...
235 views

### Increase in velocity by loss of mass? [closed]

A trolley of mass 300kg carrying a sand bag of 25kg is moving uniformly with speed of 27km/h on a frictionless track. After a while, sand starts leaking out of a hole on the floor of the trolley at ...
135 views

### Work done on stationary rocket

Suppose I have a rocket thats exerts a force (with negligible loses in mass), which cancels out the downward force of gravity. Clearly my rocket could be moving at a constant velocity (ignore air ...
923 views

### If I lift a box vertically, why is the work I do equal to the distance I lift it times the force of gravity on the box? [duplicate]

I have problems fully understanding the concept of work, so please forgive me if this is simple. If I take a box of mass $m$, and lift it a distance $d$ vertically, why is the work I have done ...
635 views

### Why does the amount of energy transferred depend on distance rather than time?

The change in energy of an object can be determined by the work equation, where work is the change in energy: $$W = F \cdot d$$ I conceptualize the transfer of energy as simply a series of small ...
249 views

### Does a different opposing force affect work?

Suppose a man exerts $10~N$ as he lifts a $1~kg$ box a distance of $2~m$ against Earth's gravity. To determine work we can use the following equation:  W = F \cdot d \\ W = (10~N) \cdot (2~m) = ...
185 views

### Short-duration forces

In circular motion, it is said that the centripetal force acts only for a very very short period of time, hence is able to only change the direction but not magnitude of the velocity. Similarly in a ...
185 views

### When can one write $a=v \cdot dv/dx$?

Referring to unidimensional motion, it is obvious that it doesn't always make sense to write the speed as a function of position. Seems to me that this is a necessary condition to derive formulas ...
944 views

### Calculating force required to stop bungee jumper

Given that: bungee jumper weighs 700N jumps off from a height of 36m needs to stop safely at 32m (4m above ground) unstretched length of bungee cord is 25m Whats the force required to stop the ...
275 views

### Power, Force Velocity

In any case, if the force and power is constant , does velocity also need to be constant? If no, can you tell me a case. Further can this be extended for non-rigid bodies.
Possible Duplicate: Why is there a $\frac 1 2$ in $\frac 1 2 mv^2$? HÃ¨llo, I have a question about kinetic energy formula. As you know, in kinetic energy formula, we have: ...