# Tagged Questions

17 views

### Phase change in a rigid container question [on hold]

Water has a critical specific volume of 0.003155 m3/kg. A closed and rigid steel tank of volume 0.025 m^3 contains a mixture of water and steam at 0.1 MPa. The mass of the mixture is 10 kg. The tank ...
32 views

### Calculating height and evaluating the vicinity of a peak in a multiplicity function for a two-state paramagnet

I have to calculate the height and width of the multiplicity function for a two-state paramagnet. I'm supposed to do this analogously to the method in the text book, which I will try to outline below. ...
36 views

### Given the Gas, Temperature and Pressure find Volume? [on hold]

Give the specific volume of carbon dioxide at -20 C for 2000 kPa and for 1400 kPa. I am getting ready for Thermodynamics class so I've been reading the textbook and doing some questions, I can ...
36 views

### Heat transfer to a cube from one of the faces [closed]

Heat Flux= 10 MW Inlet water temperature = 28 degree centigrade for cooling purpose through a tube passing through the centre of retangular block of length 50 mm,height 30 mm and width 30 mm inner ...
97 views

### Entropy of a two-level system

Consider a two-level system with energies and degeneracies $\epsilon_0 = 0, g_0=1$ and $\epsilon_1 = \epsilon, g_1=4$. I can show that the temperature at which both levels are equally populated is ...
42 views

### Gas pressure and centrifugal force

I think about a rotating torus (simplified tire) filled with ideal gas. Mass of gas is $m$ and molar mass is $M$. Pressure in non rotating torus is $p_0$. Temperature is constant $T$. Inner radius of ...
40 views

### Supercritical Steam Expansion [closed]

Ten kg of steam at 500 bar is expanded at constant pressure until its volume increases to seven times its initial value of 0.01 $m^3$. (a) Calculate the initial and final temperature of the steam ...
48 views

### Power required to keep a freezer at constant temperature

Alright, I'm completely stuck on this and so is everyone else I've asked. A freezer has a temperature Tc = -23℃. The air in the kitchen has a temperature Th = 27℃. The freezer in not perfectly ...
26 views

48 views

### Derivation of cylindrical line heat source problem?

I have a line heat source embedded inside a cylinder and I am trying to find the temperature distribution T(r,t). By using the similarity variable, the solution to the differential equation is ...
98 views

### Partition Function of a three state particle system

I've just finished studying the partition function of a two-state particle system, where particles can have a 0 energy value or E energy value . That is: Where $t_j$ is a variable of value ...
69 views

### Finding internal energy using equation of state

I have an equation of state as a function of $p$ (pressure), $T$ (temperature) and $V$ (volume) for a real gas and need to find an expression for the internal energy $U$. I know this is given by the ...
47 views

### Can I apply symmetry to this boundary value problem (BVP)?

Let's say I have a hollow cylindrical shell with inner radius $a$ and outer radius $b$ and length $L$. The temperature at at z=L is $T_{2}$ and the temperature at z=0 is $T_{1}$. There is also an ...
We have $$S=Nk_B[\ln(2 \cosh(x)) - x \tanh(x)]$$ where $$x = \frac{\mu B}{k_BT}$$ In need to show that at low temperatures entropy $$S \approx Nk_B2xe^{-2x}$$ I wrote out the $\cosh(x)$ in terms of ...