0
votes
1answer
68 views

Temperature in a Voltaic Cell

The potential difference across a voltaic cell varies with temperature. But my question is whether the voltage increases or decreases as temperature rises. According to the Nernst equation, the two ...
0
votes
1answer
63 views

Comparing unknown temperature scales [closed]

Source: Principles of Physics by Resnick, Halliday, Walker. $9^{th}$ edition. Chapter 18. Problem 6. On a linear $X$ temperature scale, water freezes at $-125.0^0X$ and boils at $360.0^0X$. On a ...
1
vote
1answer
71 views

Fluid Temperature as a function of Mass and Ambient Temperature

Problem I am trying to create an equation to calculate fuel temperature based on ambient temperature, heat exchange rate, and mass. The idea is very simple; when the mass is heated, depending on how ...
1
vote
1answer
82 views

What is the de Sitter temperature as of now?

It is claimed that de Sitter temperature is $$T=\frac{1}{2\pi}H,$$ where $H$ is the Hubble constant. I presume it is expressed in natural units with which I am not familiar. So what it will be in ...
0
votes
1answer
108 views

is this heat calculation equation correct?

If I have a line of copper wire (lets say $\textrm{1 meter}$ long, $\textrm{1 mm}$ thick) and one end is a flattened disk of copper about the size of a quarter, and I apply a lot of heat to it (I'm ...
6
votes
1answer
88 views

Temperature of a phase transition

A solid can exist in two phases, with energies $$U_{1}(S,V)=\frac{S^2}{a_1}+b_{1}V(V-2V_{0})$$ $$U_{2}(S,V)=\frac{S^2}{a_2}+b_{2}V(V-2V_{0})$$ where $a_{1},a_{2},b_{1},b_{2},V_{0}$ are positive ...
0
votes
1answer
238 views

Work done on gas by piston [closed]

In this problem there is a cylinder that is closed at both ends and has thermally insulated walls. It is divided into 2 parts by a movable, frictionless, thermally insulated piston. There is a ...
0
votes
3answers
440 views

Help with calculating resistance at a given temperature

The resistance of a bulb filament is $100\Omega$ at a temperature of $100^\circ \text{C}$. If its temperature coefficient of resistance be $0.005 \space \text{per} ^\circ \text{C}$, its resistance ...
-2
votes
1answer
133 views

Temperature of rod if end points are different temperature [closed]

How does the temperature vary along the length of the rod if its both ends are at different temperature. As an example, consider the problem: 20 cm long rod has rod at one end 100 ºC and another ...
4
votes
5answers
624 views

Having a problem about entropy, thermodynamics

I am a high school student. So, while studying about thermodynamics, I got a little curious about entropy. As I read, entropy is the rate of change of chaos. So, if the entropy change of a system is ...
0
votes
1answer
457 views

Newton's law of cooling: changing temperature of environment

A metal ball having temperature of $80^\circ C$ is placed into $m$ grams of water at $0^\circ C$. After ten minutes, it was found that the temperature of ball and water are $60^\circ C$ and ...
2
votes
2answers
369 views

Guitar strings and temperature

I am investigating Mersenne's law with a guitar by varying tension (hanging weights) and string length. Will temperature change (room temperature to ~4°C) effect the frequency noticeably? If so, is ...
2
votes
1answer
876 views

How long does it take a warm object to cool in air?

This is a work-related question. A warm steel torus of a given diameter & thickness is left in a room held at a controlled temperature, how long does it take to reach equilibrium? Assume the air ...
1
vote
1answer
343 views

Does increasing the density of a solution decrease the rate of temperature change?

I did an experiment to compare whether salt water (5% concentration of salt) or fresh water of the same volume took longer to heat up to a certain temperature. We found that salt water took longer to ...
4
votes
2answers
495 views

Is the proper interpretation of temperature missing in this book?

In Randall T. Knight’s textbook “Physics for Scientists and Engineers” in the first chapter on thermodynamics (Ch. 16: A Macroscopic Description of Matter) one of the first conceptual questions is ...
3
votes
3answers
2k views

How can I determine density of a gas only given temperature?

I have a homework problem where exhaust is traveling through an exhaust system (assumed to be air for simplicity) from and engine and then released into the atmosphere. The exhaust is at a temperature ...
1
vote
1answer
177 views

Temperature and latent heat

Building a bronze stature we make a mold and pour in the liquid bronze when the bronze hardens we remove the mold. The mold is made of 3 Kg of steel and the statue has a mas of 1 Kg. The specific ...
1
vote
2answers
176 views

Using CO2 to air condition a room

I'm trying to determine how much dry ice or liquid nitrogen I would need to cool 3300 cubic feet, about 90,000 liters of air, from about 100F (37.78C or 310K) to about 90F (26.67C or 299.81K). I'm ...
-1
votes
1answer
1k views

Mixing Water at Different Temperature

If I have cup of water at room temperature (say, $25^\circ$C). What would be the resultant temperature if I pour another cup of same amount of water at $100^\circ$C to it? Is it simply ...
2
votes
1answer
501 views

How do I find average temperature given a temperature distribution?

I was told to find the temperature distribution of a wire with a current going through it. So I found $$T(x)=T_{\infty}-\frac{\dot{q}}{km^{2}}[\frac{cosh(mx)}{cosh(mL)}-1]$$ I need to find the ...
1
vote
1answer
1k views

change of resistance in semiconductors due to temperature change

I have a question that popped up in an old exam I just can't find a way to solve. If you drop the temperature of this material from room temperature (I guess around 300K) to 0C (273K) the ...
1
vote
1answer
451 views

Given two boiling temperatures and pressures, how can I find the latent heat?

I am given the fact that at a certain pressure a liquid boils at a corresponding temperature, at a different pressure it boils at a different temperature, and then I am asked to find the latent heat ...
2
votes
3answers
95 views

Certain material heating water in a recipient

I don't know how to resolve a problem, but I don't want the answer since I'm almost going to have it resolved. What the problem says is we have 85 liters of water at 7ºC in an iron pot of 29kg. We ...