Surface tension occurs due to the tendency of liquid molecules to favor their own kind. Surface tension is important in fluid multiphase systems typically at small length and velocity

learn more… | top users | synonyms (1)

53
votes
3answers
2k views

What causes insects to cast large shadows from where their feet are?

I recently stumbled upon this interesting image of a wasp, floating on water: Assuming this isn't photoshopped, I have a couple of questions: Why do you see its image like that (what's the ...
23
votes
3answers
3k views

Why doesn't rain fall down in streams (as opposed to drops)

Why is it that raindrops don't collide and 'stick together' on their descent to Earth, arriving in streams rather than separate drops?
21
votes
4answers
2k views

Why is the pressure inside a soap bubble higher than outside?

Apparently, the air inside a soap bubble is under higher pressure than the surrounding air. This is for instance apparent in the sound bubbles make when they burst. Why is the pressure inside the ...
19
votes
4answers
2k views

Why does a cork float to the side of a glass?

What is this physical phenomenon and when it's happen ? Please take a look at this picture: Link to picture Notice: This is a cork ball attracted to sides of a glass of water
16
votes
2answers
357 views

Stripeless cleaning of windows

Cross post: http://chemistry.stackexchange.com/q/4377/22 Last week I was discussing with a friend how we thought the stripeless cleaning of windows is achieved when using a cleaner like Windex ...
15
votes
1answer
204 views

What are the equations of motion of a hole in a soap bubble?

Imagine the following situation: I have a thin stationary water film, like a soap bubble, suspended inside a large ring. I throw a small loop of string onto the film and punch a hole inside it. How ...
13
votes
4answers
616 views

Why does string not wick down?

I regularly drink tea at work and I often reuse the tea bags (yes I know I'm a cheapskate). Yesterday afternoon I used a tea bag once and kept it in the cup in case I wanted another cup before I ...
10
votes
2answers
4k views

Are there any liquids with zero surface tension?

Having read the Wikipedia page on superfluids I'm still not sure if stuff like liquid helium at the lambda point actually have surface tension or not. Is superfluidity the same thing? And are there ...
9
votes
3answers
232 views

Surface energy as thermodynamic potential

Consider free energy of sharp interface $\Gamma$ $$ \int_\Gamma \sigma\;\mathrm{d}S $$ or also free energy of diffuse interface of characteristic width $\epsilon$ given by Cahn-Hilliard/Allen-Cahn ...
8
votes
1answer
2k views

Why does water flow out of an upside-down bottle? (Rayleigh Taylor Instability)

I am currently reading the excellent book An Indispensable Truth: How Fusion Power Can Save the Planet by Francis F. Chen and I came across this explanation. The Rayleigh–Taylor Instability ...
8
votes
4answers
582 views

Zigzag flow of water along a vertical glass window

I've observed this behavior many times. When it rains, the rainwater will form vertical channels along a glass window. The flow of water is mostly confined within these vertical channels and the ...
7
votes
1answer
1k views

physics of wet hair

I'm curious about the physics behind the clumping of wet hair. More specifically, how the amount of water in hair and distance between hairs affect the clumping process. I know intuitively that when ...
7
votes
2answers
504 views

How much of the forces when entering water is related to surface tension?

When an object enters water with high velocity, (like in Why is jumping into water from high altitude fatal?), most of it's kinetic energy will be converted, eg to accelerate water, deform the object ...
7
votes
2answers
543 views

How is the water meniscus at the edge of a capillary tube

Suppose we have a capillary tube in which water can rise to a height of x cm. If we dip the tube such that the height above the surface is less than x, then how will the water meniscus be at the edge ...
7
votes
2answers
195 views

Tension in string due to surface tension

Suppose you take a loop of string and place it on the surface of a liquid, the string should become taut due to surface tension. How would you be able to calculate the tension in the loop of string? ...
7
votes
1answer
968 views

How to measure a solid-solid surface energy?

Many techniques exist to measure the surface energy between a liquid and a liquid or a liquid and a gas (see e.g. the wiki page). Methods to measure the surface energy between a solid and a fluid are ...
6
votes
2answers
717 views

Does water have surface tension in a vacuum?

I could be totally wrong here but I was thinking about water surface and what creates that. My thought is it is the thin mixture of water and air separating the two. This mixture creates the boundary ...
6
votes
2answers
469 views

Hydrostatic pressure on a teapot spout

The phenomenon where water flows on the outside side of a teapot spout is named "The teapot effect", and occurs due to a difference in pressure between water and the atmosphere. Consider the image of ...
6
votes
3answers
4k views

Why does a bullet bounce off water?

It is known that bullets can ricochet off a body of water. Is surface tension responsible for this or is this the same behavior we see when an asteroid ricochets off the atmosphere? I don't think ...
6
votes
2answers
1k views

Hydrostatic friction: why do water droplets stay at rest on an inclined glass surface?

Tjis is a non-expert question on a (seemingly simple) text-book topic. The question is about "hydrostatic friction", defined as follows. Consider a drop of water resting on a flat surface. If the ...
6
votes
1answer
141 views

Why will two bubbles floating on water surface attract each other?

Two identical bubbles floating on water surface will form clumps, according to the "cheerio effect". But what's the detail about the force? It's necessary to calculate the shape of water surface, in ...
6
votes
1answer
889 views

Collision frequency at surfaces

Collision frequency for particles in gases is well known, and collision theory is used to derive chemical reaction rates in gases, (and particles in liquid solutions as well). Using the mean velocity ...
6
votes
2answers
607 views

Surface tension of solutions and mixtures

The inspiration for this question is over on cooking.stackexchange, asking more about actual measurements for commonly consumed liquids, but I'm interested more generally as well. What determines the ...
6
votes
0answers
253 views

Surface tension between water (liquid) methane (gas)

In my project I should calculate surface tension between water and methane with lammps. I write the program.I use SPC model for water and $l_j$ for methane and water - methane. But now I don't know ...
5
votes
3answers
84 views

Will a drop of liquid flow from from the wide opening to the narrow opening of a thin funnel by the effect of air pressure?

We have a funnel that is thin enough to keep a drop of liquid inside it as shown in this figure. Assuming that the funnel is placed on a horizontal table, will the drop flow from the left side to ...
5
votes
2answers
397 views

Can water pressure ever be high enough to trap gas bubbles or keep them from surfacing?

Can water pressure ever become high enough to trap gas bubbles and/or keep them from surfacing?
5
votes
1answer
287 views

Distinctive properties of liquids

The molecules are closely arranged in solids, loosely arranged in liquids and are free to move in gases... But, Why are liquids (especially water) exhibiting these distinctive properties such as ...
5
votes
1answer
683 views

Are coffee's properties different enough from water's to cause increased spillage while walking?

I recently found this article, which describes how... It just so happens that the human stride has almost exactly the right frequency to drive the natural oscillations of coffee, when the fluid is ...
5
votes
1answer
148 views

Dropping condition

Imagine opening a water tap in order to have a smooth and cylindrical outflow and then slowly decrease the flow by adjusting the knob. At a certain moment, the side profile of the flow will become ...
5
votes
1answer
64 views

What causes the 'tears' in yoghurt drinks?

Fluid dynamical instabilities are present in many different everyday things. The famous tears in wine for example are a classical example of a Marangoni effect, where surface tension gradients due to ...
5
votes
1answer
56 views

What are circles on broth (eating soup) surface?

Think about broth in the soup, usually it has circles on its surface. What are their properties? Why there are many of them (not a few big blobs)? Are they depended on liquid's temperature? What needs ...
5
votes
1answer
193 views

Increment of surface tension with increase of temperature

What is the reason for the increase in surface tension of molten copper/cadmium with increase in temperature?
5
votes
2answers
815 views

Solving the Young-Laplace equation for arbitrary axisymmetric geometry

Say I have a non-ellipsoidal soap bubble and I want to numerically analyse the pressure in the inner lobe of this bubble here: The Young Laplace equation gives the pressure difference across a ...
5
votes
1answer
78 views

Surface Tension - Lung Alveoli

So, the way I understand this is as follows : The alveoli (pretend they're bubbles) have diameters of the order of microns implying a massive pressure required to inflate them by the Young-Laplace ...
5
votes
1answer
399 views

Lotus effect dust removal

I have found hundreds of papers describing the contact angle of water droplet sitting on hydrophobic surface and the change between Wenzel Regime and the Cassie-Baxter regime. Now, as I understand ...
4
votes
4answers
3k views

How far can water rise above the edge of a glass?

When you fill a glass with water, water forms a concave meniscus with constant contact angle $\theta$ (typically $\theta=20^\circ$ for tap water): Once you reach the top of the glass, the water-air ...
4
votes
1answer
148 views

Variational principles: Meniscus

In determining the shape of a meniscus, we have to minimize the energy per unit length along the direction perpendicular to the cross-section of the meniscus: $$\frac{E}{L}=\int^L_0 dx [\gamma ...
4
votes
2answers
207 views

At what size will self-gravitation contribute more to stability than surface tension?

The governments of Earth have embarked on an experiment to place a massive ball of water in orbit. (umm... special water that doesn't freeze) Imagine this to be a fluid with a given density, $\rho$ ...
4
votes
1answer
115 views

where does the energy of water droplet go?

My experiment: I took a string (3 mm diameter and wet) and a water source (1 drops per 2 seconds). Then I attached the string to the water source. The string was then tied to ground Observation : ...
4
votes
1answer
2k views

Why does water sometimes form bubbles when I pour it into a glass?

Sometimes when I'm filling up a container with water from the tap, bubbles will form on the top of the water. They look a little like soap sud bubbles, but there's no soap suds present. I notice, ...
4
votes
1answer
117 views

Water falling, why does it spin?

I have noticed that water, when falling will rotate. Looking closely at a thin stream from a faucet and placing a flat object mid stream you will see the water is rotating. The further down the stream ...
4
votes
1answer
1k views

Cooking pasta: why does adding a lid lead to overflow?

When cooking pasta, some organic foam usually forms on the surface of the boiling water and the situation can be kept under control by adjusting the heat (and/or adding some oil). Covering the pot ...
4
votes
2answers
104 views

Why is it tension in surface tension?

Why is it called surface tension not surface compression?
4
votes
1answer
391 views

Explanation for breaking up of a stream of water into droplets

Water falling from a tap eventually breaks into droplets at a particular distance from the tap. The distance(from the tap) at which it breaks into droplets is observed to be an increasing function of ...
4
votes
1answer
214 views

Is this formula for the energy of a configuration of 3 fluids physically reasonable?

I have studied for a couple of months now a mathematical model of the energy of a configuration of immiscible fluids situated in a fixed container such that the fluids fill the container. In other ...
4
votes
0answers
58 views

Why do floating objects attract? [duplicate]

Objects floating on the surface of calm water seem to be attracted to one another and tend to come together in a drift. Is this attraction like gravity?
4
votes
1answer
244 views

Finding Surface Tension of water at certain Temperature and Pressure

So the question is: Using the Young-Laplace Equation (if applicable), find the surface tension (dynes/cm) for water at 20 degrees Celsius with 2.5 psi. Round to the nearest tenth. ...
4
votes
2answers
2k views

Properties of liquid and air bubbles

What is/are the properties of a liquid (e.g. viscosity, surface tension) which is conducive to formation of stable bubbles floating in air (not the bubble inside the liquid)? E.g., if soap dissolved ...
3
votes
4answers
1k views

What is the physics behind a soap bubble?

A soap bubble is an extremely thin film of soapy water enclosing air that forms a hollow sphere with an iridescent surface. What fluid dynamical process occurs during the popping of a soap bubble?
3
votes
2answers
590 views

Why doesn't the water spill out?

In this experiment, a number of coins are put into a cup full of water, without spilling it. http://www.youtube.com/watch?v=N2mKpZHnEzw Firstly, let me clarify one thing. If you fill up a cup ...