2
votes
1answer
34 views

Evolution of minimization of surface tension

What are governing equations (or/and variational principles) for evolution of a simply connected body of water in vacuum? Initial state - for time $t=0$ we have a bounded simply connected set ...
1
vote
1answer
27 views

Modeling Water Surface Impact

I have a project that is to model the wave equation in a pond due to a pebble being thrown in. The project is quite simple as all we really have to model is the wave equation with an initial ...
2
votes
1answer
51 views

Time taken in changing surface tension [closed]

I had read some where that the water in glasses has a high surface tension, but in lota (It is sort of a spherical container) the surface tension is lower. How can I measure the water surface ...
7
votes
2answers
427 views

How much of the forces when entering water is related to surface tension?

When an object enters water with high velocity, (like in Why is jumping into water from high altitude fatal?), most of it's kinetic energy will be converted, eg to accelerate water, deform the object ...
0
votes
1answer
24 views

Measuring cross-section area of a flexible tube (5mm dia approx)

I want to measure the avg. inner cross-section area of a flexible tube of outer diameter 5mm. Since the cross-section isn't a circle exactly, use of vernier caliper to measure inner diameter fails. ...
4
votes
1answer
76 views

Water falling, why does it spin?

I have noticed that water, when falling will rotate. Looking closely at a thin stream from a faucet and placing a flat object mid stream you will see the water is rotating. The further down the stream ...
2
votes
4answers
71 views

In the formula for the mass of a drop of water on the end of a tube, is r internal or external radius?

In the formula for the mass $m$ of a drop of water forming on the end of a vertical capillary tube, $$m = \frac{2\pi r \gamma}{g},$$ does $r$ refer to the internal or external radius of the ...
4
votes
0answers
54 views

Why do floating objects attract? [duplicate]

Objects floating on the surface of calm water seem to be attracted to one another and tend to come together in a drift. Is this attraction like gravity?
3
votes
0answers
43 views

Why will two bubbles floating on water surface attract each other?

Two identical bubbles floating on water surface will form clumps, according to the "cheerio effect". But what's the detail about the force? It's necessary to calculate the shape of water surface, in ...
1
vote
2answers
86 views

What is a good model for computing water dropping on a surface?

Before introducing my question I would like to outline the fact that I'm a coder, so I can be wrong when using some kind of terminology. What is a good model for computing the flow, the shape and all ...
4
votes
1answer
100 views

where does the energy of water droplet go?

My experiment: I took a string (3 mm diameter and wet) and a water source (1 drops per 2 seconds). Then I attached the string to the water source. The string was then tied to ground Observation : ...
2
votes
1answer
63 views

Non-determinitric flow of water stream on vertical porcelain surface

I noticed several times while washing my hands that accumulated water when starts streaming vertically does not flow vertically in straight line on vertical porcelain surface under the force of ...
3
votes
2answers
85 views

Does quasi-static motion imply zero energy dissipation?

When a droplet is deposited on a surface with some surface roughness and subsequently tilted it can stick due to pinning (think of droplets on a window after rain). What I am interested in is ...
6
votes
2answers
302 views

How is the water meniscus at the edge of a capillary tube

Suppose we have a capillary tube in which water can rise to a height of x cm. If we dip the tube such that the height above the surface is less than x, then how will the water meniscus be at the edge ...
1
vote
2answers
380 views

Capillary tube of insufficient length

I was wondering if we have a very thin glass tube placed in a tub of liquid and the portion of the tube outside the liquid is lesser than the height to which the liquid can rise because of ...
15
votes
1answer
187 views

What are the equations of motion of a hole in a soap bubble?

Imagine the following situation: I have a thin stationary water film, like a soap bubble, suspended inside a large ring. I throw a small loop of string onto the film and punch a hole inside it. How ...
2
votes
2answers
3k views

About an upside down cup of water against atmosphere pressure

There is an experiment we learned from high school that demonstrated how atmosphere pressure worked. Fill a cup of water and put a cardboard on top of it, then turn it upside-down, the water will not ...
5
votes
2answers
293 views

Can water pressure ever be high enough to trap gas bubbles or keep them from surfacing?

Can water pressure ever become high enough to trap gas bubbles and/or keep them from surfacing?
3
votes
4answers
770 views

What is the physics behind a soap bubble?

A soap bubble is an extremely thin film of soapy water enclosing air that forms a hollow sphere with an iridescent surface. What fluid dynamical process occurs during the popping of a soap bubble?
1
vote
1answer
207 views

Dynamic simulation of surface tension [closed]

Is there any substantial body of work in physics on dynamically simulating effects of surface tension on liquids? The texts i found so far on fluid dynamics all seem to ignore surface tension, ...
4
votes
1answer
205 views

Finding Surface Tension of water at certain Temperature and Pressure

So the question is: Using the Young-Laplace Equation (if applicable), find the surface tension (dynes/cm) for water at 20 degrees Celsius with 2.5 psi. Round to the nearest tenth. ...
6
votes
2answers
376 views

Hydrostatic pressure on a teapot spout

The phenomenon where water flows on the outside side of a teapot spout is named "The teapot effect", and occurs due to a difference in pressure between water and the atmosphere. Consider the image of ...
2
votes
1answer
209 views

Why does tea rises in the pot but water don't?

I was wondering when I boil water in a pot it only shakes too much while boiling. But I could not figure out why tea rises in the pot when we boil it. it is also a liquid but it starts rising up till ...
16
votes
2answers
299 views

Stripeless cleaning of windows

Cross post: http://chemistry.stackexchange.com/q/4377/22 Last week I was discussing with a friend how we thought the stripeless cleaning of windows is achieved when using a cleaner like Windex ...
9
votes
4answers
456 views

Why does string not wick down?

I regularly drink tea at work and I often reuse the tea bags (yes I know I'm a cheapskate). Yesterday afternoon I used a tea bag once and kept it in the cup in case I wanted another cup before I ...
2
votes
1answer
263 views

Satellite droplets in a breaking liquid jet

The famous example of a dripping faucet is an example of a Rayleigh-Plateau instability in which there is a certain jet radius below which perturbations on the surface will grow to break the jet into ...
2
votes
0answers
87 views

Wrinkling paint - soluto/thermocapillarity - is it due to the primer or solvent [closed]

This is really a one-and-a-half part question. I know that when paint is mixed with a solvent or used with a primer, it sometimes wrinkles. As I understand, a key physical phenomena here is a ...
3
votes
5answers
273 views

How can the surface of a liquid exist if there are no attracting molecules above it?

Okay this is probably a stupid question but here goes: We know that molecules in a liquid are attracted from all the molecules around it so there is no net attraction. Well, then how do the ...
5
votes
1answer
184 views

Increment of surface tension with increase of temperature

What is the reason for the increase in surface tension of molten copper/cadmium with increase in temperature?
4
votes
4answers
2k views

How far can water rise above the edge of a glass?

When you fill a glass with water, water forms a concave meniscus with constant contact angle $\theta$ (typically $\theta=20^\circ$ for tap water): Once you reach the top of the glass, the water-air ...
-2
votes
1answer
133 views

Does water have the same surface tension at same temperature but different volume?

I'm making an experiment and it is written in my older questions. Now, my question is - Does water have the same surface tension at same temperature but different volume?
5
votes
1answer
331 views

Lotus effect dust removal

I have found hundreds of papers describing the contact angle of water droplet sitting on hydrophobic surface and the change between Wenzel Regime and the Cassie-Baxter regime. Now, as I understand ...
0
votes
1answer
451 views

Calculational method for determining surface tensions from photograph of menisci?

How can I get from a photograph of a liquid surface to a value for the surface tension.
1
vote
1answer
215 views

Why does water make a liquid film?

Cut a narrow slit in a thin sheet of opaque material. Immerse the sheet in a liquid, such as water. After removing the sheet from the liquid, you will see a liquid film in the slit. The question is: ...
5
votes
2answers
728 views

Solving the Young-Laplace equation for arbitrary axisymmetric geometry

Say I have a non-ellipsoidal soap bubble and I want to numerically analyse the pressure in the inner lobe of this bubble here: The Young Laplace equation gives the pressure difference across a ...
2
votes
1answer
107 views

Beer bottle leftovers pour quickly only after waiting?

Why is it that after pouring a delicious beer from a bottle, I can hold it upside down for several seconds without reward, but if I wait a bit, the remainder presumably settles at the bottom and ...
0
votes
2answers
2k views

Physics behind Water drops during falling from a tap

what is physics behind Water drops during falling from a tap. water drop animation A drop or droplet is a small column of liquid, bounded completely or almost completely by free surfaces. Why Water ...
5
votes
1answer
523 views

Are coffee's properties different enough from water's to cause increased spillage while walking?

I recently found this article, which describes how... It just so happens that the human stride has almost exactly the right frequency to drive the natural oscillations of coffee, when the fluid is ...
3
votes
1answer
446 views

Change in appearance of liquid drop due to gravity

A liquid drop is spherical in shape due to surface tension. But why does it appear as a vertical line under the free-fall due to gravity? (E.g. During a rain - falling raindrop) Is there a specified ...
8
votes
4answers
506 views

Zigzag flow of water along a vertical glass window

I've observed this behavior many times. When it rains, the rainwater will form vertical channels along a glass window. The flow of water is mostly confined within these vertical channels and the ...
3
votes
2answers
443 views

Need help understanding dynamic and static contact angles

I've run into a conceptual road block. I'm coming to you guys because I think my adviser is getting annoyed with me. The concept involves a meniscus being pulled up a cylinder. I understand that ...
8
votes
1answer
2k views

Why does water flow out of an upside-down bottle? (Rayleigh Taylor Instability)

I am currently reading the excellent book An Indispensable Truth: How Fusion Power Can Save the Planet by Francis F. Chen and I came across this explanation. The Rayleigh–Taylor Instability ...
2
votes
2answers
9k views

'Applications' of surface tension [closed]

What are some common applications, uses, exploitations of the properties of surface tension? Here is what I mean. A water strider can walk on water, that is a consequence of surface tension. ...
2
votes
1answer
166 views

What is “surface fluid adhesion energy”?

This is related to my previous question. Pardon me for asking so many questions recently. My physics knowledge is not that good, and some answers are hard to find. In the question in the link, I ...
4
votes
2answers
202 views

At what size will self-gravitation contribute more to stability than surface tension?

The governments of Earth have embarked on an experiment to place a massive ball of water in orbit. (umm... special water that doesn't freeze) Imagine this to be a fluid with a given density, $\rho$ ...
1
vote
1answer
186 views

Surface Tension of a Liquid - When a liquid body is acclerating

As far as I understand it (which admittedly isn't very far), surface tension forces are made up by the tension-attractive forces of molecules at the liquid-gas/vacuum interface, such as those between ...
6
votes
2answers
525 views

Surface tension of solutions and mixtures

The inspiration for this question is over on cooking.stackexchange, asking more about actual measurements for commonly consumed liquids, but I'm interested more generally as well. What determines the ...
9
votes
2answers
3k views

Are there any liquids with zero surface tension?

Having read the Wikipedia page on superfluids I'm still not sure if stuff like liquid helium at the lambda point actually have surface tension or not. Is superfluidity the same thing? And are there ...