# Tagged Questions

Analysis of a system of bodies where all forces are in balance and there is no motion relative to a chosen reference frame.

51 views

### Determine the point at which moment vector is zero on a 3D body

I have information about total force and moment on a body for three points, whose coordinates I know. From this information I would like to determine the point at which moment would be zero. ...
464 views

### Determining the neutral axis of an I-shaped cross section with dissimilar materials

Determine the neutral axis of the I- shaped cross section with dissimilar materials. The top rectangle of the cross section is made out of aluminum and the second and third part are titanium ( these ...
48 views

### Minimum force needed to keep the book from slipping?

I would just like to know if my answer to part C is correct because I am confident in parts a and b, Also note that 51.5N is the wrong value for P. P=515N. Ok so since P= normal force, this means ...
56 views

### Angles in a static equilibrium

I have three masses (Fα, Fβ & Fg) with 2 pulleys, and a wind variable which is in static equilibrium. I have already calculated the appropriate forces for the 3 masses by multiplying it with 9.81m/...
178 views

### Newton's Third Law As Discussed in Den Hartog's Mechanics

A question, but some preliminaries in order to avoid answers involving concepts not yet introduced in the text I'm reading--Den Hartog's Mechanics. Near the very beginning of his book, Den Hartog ...
58 views

### Distribution forces

I've got two trees and between them is a rope. When someone about 100kg sits at the center of the rope, what are the forces on both parts of rope (to the left-hand side from the person and right-hand ...
23 views

### Transferable force

If I for example have two rectangular pieces of steel that are both W=40mm, L=1000mm, H= 40mm and are both completely ridged. One piece of steel is resting on top of the other piece of steel, if I ...
38 views

### For a cantilever beam, is bending stress linearly proportional to elastic deflection?

Let's say I have a cantilever beam (a beam with a fixed support on one end only) and introduce a downward point force (by hanging a weight on it or something) at some constant distance from the ...
87 views

### Seesaw Physics - Shipping Container House Problem

I'm currently building a house using shipping containers. One of the containers is in a cantilever position, sticking out from the base concrete structure like this: ...
75 views

In the attached image the force output of the plank is calculated to be the work done (FDf) divided by the height the block rises (Dw). So the force the plank applies on the block is (FDf)/(Dw). But ...
37 views

### Why can't we have more than 3 moment equations in equilibrium equations

Excuse me for a kind of stupid question but, In statics of a 3D rigid body, the equations to determine equilibrium are at most 6 (Fx Fy Fz Mx My Mz = 0) (not counting those from hinges and rollers). ...
44 views

### What does $\bar{x}_{\textrm{el}}$ represent?

In the context of centroids and moments, what do $\bar{x}_{\textrm{el}}$ and $\bar{y}_{\textrm{el}}$ represent? For example: $$\bar{x}L = \int \bar{x}_{\textrm{el}}dL$$ Some references that use ...
908 views

### How do I know which force to use in moments calculation?

I'm working on some Statics problem, with the method of joints, etc and for all of them, we use sum of moments = 0. However, I'm very confused about which forces I should use to find the sum of ...
957 views

### Shape of a string/chain/cable/rope/wire?

The height of a string in a gravitational field in 2-dimensions is bounded by $h(x_0)=h(x_l)=0$ (nails in the wall) and also $\int_0^l ds= l$. ($h(0)=h(l)=0$, if you take $h$ as a function of arc ...
167 views

### Obtaining point of application of Ground Reaction Force with use of a hyperstatic load-cell array platform

I'm looking for the theory of an experiment that is giving me a hard time to perform. I have an instrument composed of a rigid horizontal square plate rigidly supported under each corner by a load-...
3k views

### Forces and torques about the CENTER OF MASS of a physical pendulum

I'm currently stumped by the following situation. Say we've got a rectangular physical pendulum (think ruler with a hole-punch at one end). It's trivial to analyze the motion of the pendulum with the ...
36 views

### Dropping vertices of an overdetermined statics system graph

In statics, the problem of determining the tensions of K cables that connect a structure made of N points and keep all points in static equilibrium implies $ND$ systems of equations, where $D$ is the ...
422 views

### Mechanics of Materials (pressure and temperature)

A solid right cylinder of rock core is surrounded by four rods made of mild steel (all-thread rods). The rods are placed equidistantly around the core in a square formation. The tops and bottoms of ...
41 views

I completely disagree with the following calculations: Based on my understanding, there is no force either internal or external applied to the Green bar, so it should be 0N. The reaction (internal) ...
12 views

### Toledo Scale - Show How Distance from Weight to Axis of Rotation Varies with Load

I am trying to solve the problem under from Hartog's Mechanics, specifically, part $b$. Intuitively, as mentioned here, by halving the load $P$, $l_1$ will also be halved. However, I would like to be ...
30 views

### Shear flow in J section type beam

What does the distribution of shear flow look like in a J section type beam. I'm only interested in a qualitative picture of it. I'm not interested in the calculations themselves. It is the top of the ...
52 views

### When a force applies to a rigid body at point, then does every part of the body experience the same kind of force?

Suppose that a rigid body is static under the action of several forces that are applied at different part of the body. Then is it true that if one divides the body into small pieces, then each piece ...
44 views

### How do I minimize the the stress created by fore-aft forces?

My friends and I are designing a bench press spotter. Essentially, when the user needs help lifting the barbell due to muscle fatigue, an arm on each side of the user raises to provide assistance. ...
What equations to use on this system to form a matrix $A$ with dimensions $[n,n]$ and load vector $q$ with dimension $[n]$ ? I am trying to get vertical displacement $w$. $$w = A^{-1}\times q$$ ...