# Tagged Questions

Analysis of a system of bodies where all forces are in balance and there is no motion relative to a chosen reference frame.

5k views

### Why does the weighing balance restore when tilted and released

I'm talking about a Weighing Balance shown in the figure: Press & Hold on onside of the horizontal beam and then release it. It makes some oscillations and comes back to equilibrium like shown ...
988 views

### Shape of a string/chain/cable/rope/wire?

The height of a string in a gravitational field in 2-dimensions is bounded by $h(x_0)=h(x_l)=0$ (nails in the wall) and also $\int_0^l ds= l$. ($h(0)=h(l)=0$, if you take $h$ as a function of arc ...
5k views

12k views

### Why Won't a Tight Cable Ever Be Fully Straight? [duplicate]

I posted this picture of someone on a zipline on Facebook. One of my friends saw it and asked this question, so he could try to calculate the speed at which someone on the zipline would be going ...
12k views

### Why can't a rope be pulled completely straight?

I have found several discussions on how to calculate the sag of rope that is tied off at two points (like a tightrope), and I understand it to a certain extent. What I can't wrap my head around is how ...
531 views

### Moment of Inertia, why $r^2$and not $r$?

So my engineering mechanics book includes a brief discussion on area moments of inertia. Unfortunately, the ensuing chapter is predominately computational in nature. I don't have a thorough grasp of ...
2k views

### Calculating torque in 3D?

Say you have a sphere, and you have several torque vectors acting on it, all at different points. Say you have the vector (6i + 3j + 5k) originating from point A, and the vector (3i + 1j + 9k) ...
3k views

### Calculate the weight a simple plank can support [closed]

I'd like to build a simple desk; just a single plank of wood (or a few side-by-side) with solid supports on each end of the desk. What I'm trying to figure out is how thick a plank I want to use for ...
377 views

### Find center of mass and moment applied on beam structure [closed]

I have a simple physics problem to solve but it is giving me a slightly difficult time to figure out. The problem: I have a beam structure with same cross section. It consists of three beam. First ...
3k views

### Solving a statically indeterminate truss

I'm trying to solve the statically indeterminate truss shown below and I'm having a little trouble. $H$, $P$ and $\beta$ are given. The material is aluminum (density is 2700 ${kg/m^3}$) and has a ...
3k views

### Forces and torques about the CENTER OF MASS of a physical pendulum

I'm currently stumped by the following situation. Say we've got a rectangular physical pendulum (think ruler with a hole-punch at one end). It's trivial to analyze the motion of the pendulum with the ...
11k views

### Calculation of the maximum load to the bar

Looking for a way of calculating the maximum weight (W) to the rod with the given length (L) where the rod did not break and that only bend for (b) mm. Need only approximative solution (read: ...
154 views

### How does force transmit through a solid block?

If you take a solid block, say, a cube of side length $l$ with density $\rho$, you place it upon a solid floor, and you apply an external pressure of $p(x,y)$ on the upper face ($x$ and $y$ define a ...
259 views

### Connection between moment/torque and centre of gravity?

So I understand how moments work with regards to basic examples like pushing a door, in that the further you are away from the hinges of the door, the greater the moment, which is like a turning force....
422 views

### How is normal force distributed along the surface of contact?

Help me settle this argument. A mass $m$ is placed on a thin diving board. The base of the diving board has mass $M>>m$. Does the board tip over? I drew the following FBD and concluded there ...
145 views

### Why is it effectively impossible to balance this rectangle block on a triangle block? (See photo)

I've always wondered why it's basically impossible to balance a rectangle block on top of a triangle one like this. This is my nine-year-old giving it a try. I have never in my life gotten it to ...
2k views

### Trying to understand the tension in a spring with two weights attached [duplicate]

Possible Duplicate: Why I think tension should be twice the force in a tug of war For (A) in this image, I would think the tension should be should be 2mg. However, my book says the weight ...
225 views

### Amount of material required for a pressure tank

I read the answer for the question Why is a hot air balloon “stiff”? and thought something sounded ridiculous. My engineering requirement is that the walls be strong enough. Here $T$ will be the ...
129 views

### Determining the components of the force on a curved surface due to pressure

I have a cross section of a half-tube with a pressure gradient across it causing a force outwards. I am attempting to extract the vertical component (in relation to diagram) of the force on this semi-...
639 views

### Massive ropes and tension

Consider the diagram bellow, a massive string hanging in equilibrium My question is this: Can we take any 2 random point on the rope, say A and B and then use $\sum F=0$ on the rope between them: i....
1k views

### Mechanics question - ladder leaning against a wall

I am struggling with part a) of this question: Here is the solution: In part a) they prove that $F \leq \mu R$ is false for this system. So as $F$ is neither less than nor equal to $\mu R$ it ...
205 views

### Floating objects and fluid statics

If an object is floating, I know about how buoyancy force (density of liquid* volume displaced* g) must equal gravitational force (density of object* volume of object* g). Can someone explain if it is ...