Analysis of a system of bodies where all forces are in balance and there is no motion relative to a chosen reference frame.

learn more… | top users | synonyms

4
votes
2answers
223 views

Can structural trusses in centrifuges be helpful at all?

Imagine a rotating space station for the purpose of creating artificial gravity. Generally, such a space station is portrayed as a ring or a cylinder. Images of these space stations often have lines ...
1
vote
1answer
42 views

How exactly do walking canes and crutches help?

I am reading introductory physics, and there is a chapter on equilibrium. In the chapter, the author mentions how devices can exploit distribution of forces to help those that are physically ill, via ...
2
votes
0answers
38 views

Moment line of action

I am having trouble understanding a moment's line of action. Lets say we have door hinge of $L$ length and push down on it with $X$ force. The moment at the begin $(O)$ of the hinge would then be ...
1
vote
2answers
399 views

Determining the neutral axis of an I-shaped cross section with dissimilar materials

Determine the neutral axis of the I- shaped cross section with dissimilar materials. The top rectangle of the cross section is made out of aluminum and the second and third part are titanium ( these ...
0
votes
1answer
34 views

Tension along a curved surface [closed]

I'm curious what the tension in a rope will be when its exposed to a uniform load. Assuming a similar setup to this question what will the tension along the rope/tube be?
0
votes
0answers
19 views

Shear flow in J section type beam

What does the distribution of shear flow look like in a J section type beam. I'm only interested in a qualitative picture of it. I'm not interested in the calculations themselves. It is the top of the ...
3
votes
1answer
31 views

Simple Beam Worst Case Scenario

Part 1 If I have a simple beam with two supports and a static load, does placing the load in the center push the beam closest to breaking (catastrophic failure)? Will this be more likely to break ...
0
votes
1answer
40 views

How to design a stable table?

Imagine a round table, standing on one central leg. The central leg has a base for balance. That base is what I am referring to. What physics do I need to understand to design a stable table? For ...
2
votes
1answer
1k views

How to calculate the supporting force exerted by a stationary object (cupboard) and support (brackets) for it?

I have a wall mounted Stuva Ikea cupboard, which measures 60x64x30cm. The base is 64x30cm. It is already supported by 2 holes at the back base, (64x60cm). But I need to add in L shape brackets ...
8
votes
4answers
937 views

Two people are holding either end of a couch, is one person exerting more force than the other?

I was carrying a couch with my flatmate yesterday, and I started thinking about this. Often when carrying objects like this, one person will be taller and has thus lifted his end of the couch higher ...
1
vote
2answers
56 views

Connection between moment/torque and centre of gravity?

So I understand how moments work with regards to basic examples like pushing a door, in that the further you are away from the hinges of the door, the greater the moment, which is like a turning ...
2
votes
1answer
43 views

Distribution forces

I've got two trees and between them is a rope. When someone about 100kg sits at the center of the rope, what are the forces on both parts of rope (to the left-hand side from the person and right-hand ...
1
vote
1answer
25 views

Half of a uniform disc suspended by two strings [closed]

Suppose we have a half of a thin, homogenous disc hanging from the ceiling as shown: Given the weight of the disc $Q$, calculate tensions in strings $S_1$,$S_2$. Now this seemed like quite a simple ...
2
votes
2answers
32 views

Formula for balance with three arms?

I'm searching for a way to express the angle of the arm of a balance instrument expressed in the weight that is present in one arm. For a two legged balance one could use the moment formula: moment = ...
1
vote
1answer
72 views

Determining the components of the force on a curved surface due to pressure

I have a cross section of a half-tube with a pressure gradient across it causing a force outwards. I am attempting to extract the vertical component (in relation to diagram) of the force on this ...
5
votes
5answers
8k views

Why can't a rope be pulled completely straight?

I have found several discussions on how to calculate the sag of rope that is tied off at two points (like a tightrope), and I understand it to a certain extent. What I can't wrap my head around is how ...
1
vote
1answer
40 views

How to find the spring coefficient of a simply supported beam?

So I've been searching wikipedia and google but nothing can show how to find the spring coefficient of a simply supported beam with a uniformly distributed load. The spring coefficient, $k$, is ...
1
vote
2answers
113 views

Floating objects and fluid statics

If an object is floating, I know about how buoyancy force (density of liquid* volume displaced* g) must equal gravitational force (density of object* volume of object* g). Can someone explain if it is ...
1
vote
1answer
1k views

Calculating torque in 3D?

Say you have a sphere, and you have several torque vectors acting on it, all at different points. Say you have the vector (6i + 3j + 5k) originating from point A, and the vector (3i + 1j + 9k) ...
1
vote
1answer
137 views

How to calculate the normal force exerted by a fulcrum off-center?

So I know that $F_N$ exerted by a fulcrum right under the centre of mass for, say, a long horizontal rod, is equal to $mg$. But what if the fulcrum is off the centre of mass either to the right or the ...
1
vote
0answers
52 views

How does force transmit through a solid block?

If you take a solid block, say, a cube of side length $l$ with density $\rho$, you place it upon a solid floor, and you apply an external pressure of $p(x,y)$ on the upper face ($x$ and $y$ define a ...
0
votes
0answers
44 views

Statics: Cable with distributed loads. What am I doing wrong?

This is the problem: It says: If the maximum value for the ABCD cable's tension is 15 kN, determine: a) $h_b$ b) $h_c$ My development was: 1) Whole body (ABCD). Sum of momentums in D equals ...
1
vote
3answers
556 views

Are circles stronger than triangles?

I've often herd in engineering that "there is no shape stronger than a triangle". I also recall that arches are very strong shapes as well, which can be crudely described as a ...
0
votes
1answer
59 views

How many bricks can be put without disordering the equilibrium? [closed]

A homogenous brick with length L, is on a horizontal surface. On this brick are put one after another other bricks, which are the same with the first. Every brick is moved along L/5 units horizontally ...
1
vote
1answer
115 views

Exam review problem. Weird answer [closed]

The question asks us to calculate the holding force of the triangular mounting if the rock weighs exactly $2kg$ and the mounting supports the rod at exactly $\frac{1}{4}$ of its length. ($g=9.81 ...
-1
votes
1answer
39 views

What does $\bar{x}_{\textrm{el}}$ represent?

In the context of centroids and moments, what do $\bar{x}_{\textrm{el}}$ and $\bar{y}_{\textrm{el}}$ represent? For example: $$\bar{x}L = \int \bar{x}_{\textrm{el}}dL$$ Some references that use ...
0
votes
1answer
155 views

Calculate reaction forces, bending moments and shear forces, udl=0.5kN/m

i have reaction forces of Ra $= 7.890625N$ & Rb $=1 03.359375N$ my shear force calculation equates to 0N at 5.5m which i believe is correct however i am having trouble getting the bending ...
-1
votes
1answer
490 views

Internal forces in a truss and its geometry [closed]

I'm to work out the internal forces in a truss, but I can't get my head around the geometry of the truss itself. I'm starting to think there may have been information on the diagram which I missed. ...
0
votes
2answers
74 views

What is happening when a jenga block tower wobbles?

Imagine I am 3/4's of the way through a Jenga wooden block game. I have a tower and it is starting to wobble. To me it seems there are two possible causes for this: the wood is compressing and ...
0
votes
3answers
255 views

Tension Problem: Finding an angle when only given the tension in two ropes [closed]

A crate is hanging from a rope which is attached to a metal ring through which a second rope runs, as shown to the right. What is the angle $\theta$ if the tension in rope 1 is $1.19$ times the ...
2
votes
0answers
308 views

Mechanics of Materials (pressure and temperature)

A solid right cylinder of rock core is surrounded by four rods made of mild steel (all-thread rods). The rods are placed equidistantly around the core in a square formation. The tops and bottoms of ...
1
vote
2answers
149 views

Is the center of mass of an object just a convention?

I am currently studying moments. The concepts are fairly obvious, but there is one thing I don't understand: the concept of center of mass. Why do we consider that the weight of a uniform object is ...
1
vote
1answer
2k views

Calculating mass of object by lifting edge

Assuming a solid rectangular plate, hinged along one edge. How does one calculate the mass of the plate if the force necessary to lift the opposite edge is known?
1
vote
1answer
56 views

Why can contact force be ignored here?

I was discussing the first part of this question with a friend, and he told me that while taking moments about $A$ and $B$, we can ignore the reaction force at C. Indeed this is correct, because ...
1
vote
2answers
966 views

Statics with ladder and wall [closed]

A uniform ladder of mass m and length L rests against the wall. The coefficients of static friction between the floor and the ladder and between the wall and the ladder are equal to each other (μ). ...
0
votes
0answers
36 views

When a force applies to a rigid body at point, then does every part of the body experience the same kind of force?

Suppose that a rigid body is static under the action of several forces that are applied at different part of the body. Then is it true that if one divides the body into small pieces, then each piece ...
0
votes
1answer
266 views

Tension of string attached to ball on inclined plane [closed]

A sphere of weight 50N and radius 4cm is held by a string of length 8 cm against a smooth wall inclined at an angle of $70^{\circ}$. Find the tension in the string and the force between the ball and ...
0
votes
0answers
14 views

Plastic loading of a cylinder

I am trying to model a solid cylinder being loaded in the axial direction. At the upper limit of the elastic loading the cylinder has been compressed to a height h and cross-sectional area A. It is ...
0
votes
3answers
110 views

What force $\vec{F_{1}}$ is needed to balance the beam in the diagram below? [closed]

What force $\vec{F_{1}}$ is needed to balance the beam in the diagram below? I know that $\sum \vec{F}$ must equal zero. I also know that since the unknown force is farther from the pivot, ...
0
votes
1answer
98 views

How does the net torque have to be 0 at all points for static equilibrium? [duplicate]

I know that for a mass to be in static equilibrium two things have to be satisfied: $\sum F=0$ and $\sum T=0$, where $T$ represents torque. However, I am not sure how the latter can apply in a ...
-1
votes
1answer
141 views

Tension on strings holding a weight [closed]

It's a 100% standard problem in any basic physics course, and I cannot solve it. Here's the scenario: What is the tension in the strings (T1 and T2)? My thoughts were (cos/sin rewritten as ...
0
votes
1answer
194 views

Find center of mass and moment applied on beam structure [closed]

I have a simple physics problem to solve but it is giving me a slightly difficult time to figure out. The problem: I have a beam structure with same cross section. It consists of three beam. First ...
1
vote
1answer
235 views

Parallel axis theorem

For this question we are working in 2-D space. Let's say that we have an arbitrary body. I know the inertia with respect to a perpendicular axis (to the body, that is) that passes through a point (A). ...
1
vote
2answers
342 views

Weighing with One-Foot Scale

I stand with left foot on a scale and the other on a piece of effectively incompressible material at the same initial height at the scale's top surface. The weight shown is WL. I repeat with right ...
0
votes
1answer
112 views

How does Centre of gravity influence the equilibrium?

Ok! This really makes hard to think, how does a single point determine the object's equilibrium? If an object is displaced from its equilibrium-position & if the equilibrium is stable, the object ...
0
votes
3answers
112 views

Finding minimum force to hold a particle in equilibrium [closed]

A particle of mass $m$ is suspended from a point A on a vertical wall by means of a light inextensible string of length $b$. Find the magnitude and direction of the minumum force $\boldsymbol P$ ...
0
votes
0answers
224 views

Ladder equilibrium problem - Where do the hinge forces go?

In my physics homework there is a problem about a hinged ladder like this and a man is standing on one of its halves. The two parts of the ladder are hinged together at the top. My question is, ...
0
votes
2answers
192 views

Prevent a box from tipping over: height of CG?

I'm on a problem that can be simplified in the following way: A box is placed on a horizontal plane, and is pinned to the ground on one side only such that it can tip over that side. Given a ...
2
votes
2answers
63 views

The principles of statics without force

I'm a student of civil engineering and now my course is covering the basics of statics, such as the equations of equilibrium, etc. Trying to get a better basis on the subject, I started to search on ...
1
vote
2answers
293 views

Forces exerted on legs of a table

This is actually for a computer science homework problem, but I haven't studied any physics in five years so I'm having a bit of trouble. I'm given a table of three legs with their coordinates and I ...