2
votes
3answers
147 views

What is the significance of clamping the center of the spring?

7. A block is hung on a spring, and the frequency $f$ of the oscillation of the system is measured. The block, a second identical block, and the spring are carried in the Space Shuttle to space. ...
1
vote
1answer
52 views

Simple Harmonic Motion homework [closed]

Suppose we have a rod of mass $m$ and length $l$ which is pivoted at center and two springs of spring constant $k$ are attached at opposite ends so that it performs simple Harmonic motion when ...
1
vote
1answer
49 views

Frequency of Oscillations about Circular Orbit [closed]

I'm trying to figure out the frequency of small oscillations about the basic circular path of a mass at the end of a spring, being spun around a table. I understand that the spring will stretch out a ...
2
votes
1answer
63 views

Equation of motion for system of springs

I need to find the equations of motion for the following system. If $x_1$ is $m_1$'s extension and $x_2$ is $m_2$'s, then, I feel like for $m_1$ we just need to consider $x_1$ giving $$m_1 a_1 = ...
1
vote
1answer
45 views

Spring Powered Car - Which Design Is Best? [closed]

I'm in the preliminary stages of building a spring powered car to race over a distance of 10 metres. It is a yearly event held in my local area and so far we've only seen one spring powered car. I ...
0
votes
2answers
85 views

A spring with two masses in an inelastic collision

An ideal spring is attached to a wall, and the other end is attached to a mass $m$. The spring is initially compressed a distance $x$. After it is released, the mass collides with another mass $2m$ ...
0
votes
2answers
53 views

equivalent spring constant for a drum floating in water

If I have a drum floating in water, how do I find the equivalent spring constant? I know that the water has density $\rho$, the drum has diameter $d$ and height $\ell$, and the positive direction is ...
1
vote
1answer
52 views

Amplitude of motion for a cart on an inclined plane attached to a spring

A very practical question. So, let's imagine that we have a small cart attached to a spring lying on an inclined plane. If I move my cart by 10 cm (measured as if there were a ruler lying along the ...
0
votes
1answer
48 views

Electrical Analog of a Chain of Springs

I'm trying to wrap my head around the Force $\rightarrow$ Voltage analogy between mechanical and electrical systems. I have a mechanical system where masses are connected by springs in series, and ...
0
votes
1answer
86 views

Coupled Spring System (3 mass 3 springs)

Hello I am having trouble trying to find the correct model for this coupled spring system. The scenario is the following we have: Ceiling - Spring - Mass(1) - Spring(2) - Mass(2) - Spring (3) - ...
0
votes
2answers
51 views

Deriving spring oscilation period [duplicate]

We have a spring attached to a wall and at the other part an object on a frictionless surface. I tried to calculate the spring oscilation period. I used the conservation of energy and kinematics ...
0
votes
2answers
75 views

Physical interpretation of initial conditions for damped mass-spring system

I have background in pure mathematics so my question is about physical meaning. If we consider equation for damped mass-spring system, it is linear ordinary second order differential equation. So to ...
0
votes
1answer
37 views

Doing a spring experiment, and need to find the stretch required

I'm doing an experiment where I have to calculate the stretch of a spring needed for it to launch itself into a trashcan located some distance away. The spring is located on the edge of a ramp that is ...
4
votes
1answer
98 views

Faster than critical damping for harmonic oscillator?

The image below shows damping for spring oscillator with Hooke law F=-kx and damped with F=-cv where: k is spring constant x is oscillator position c is damping coefficient v is velocity of oscillator ...
-1
votes
1answer
53 views

A block falling from a height on a block suspended by spring [closed]

The block suspended by the spring is hanging freely and its mass is M. The small block of mass m is dropped on the bigger block from height h. After the small block is dropped 》》》 I want help in ...
0
votes
1answer
111 views

Lagrangian for a moving spring device [closed]

How can I write the proper Lagrangian for such as system as the one shown in picture? Am confused about what is the suitable way to designate the coordinate.
0
votes
0answers
21 views

Question about two masses connected by a spring [duplicate]

I have two masses connected by a spring. They are horizontal and are not affected by friction or gravity. The spring's stiffness constant is $k$, and $x_1$ and $x_2$ are the displacements of the ...
0
votes
1answer
212 views

Atwood machine with spring

I'm just beginning to learn about Lagrangian mechanics, and I am asked to find the kinetic energy of this Atwood machine (See figure). I am told, that the kinetic energy should be: ...
1
vote
2answers
81 views

Using an electric winch to compress a spring and launch an object

I'm having trouble grokking the relationship between a winch's pull/torque and a spring's potential energy. I would like to compress a spring using an electric winch and figure out how far it will be ...
1
vote
1answer
182 views

Spring Damper System : Recoil Reduction

I am designing a man-"portable" 30mm sniper rifle. Although it may be classified as a anti-materiel cannon. I have the mass of the round in total, and the mass of the projectile leaving the barrel, ...
0
votes
1answer
174 views

Double-spring mass system

We just had a lesson about elementary mass-spring systems (SHO), and I thought about a horizontal situation with two springs with the test mass oscillating in between. If we are to manually stretch ...
0
votes
1answer
99 views

Two masses attached by a spring [closed]

Suppose there is a system of two masses $M_1$ and $M_2$ connected by a spring with constant $K$ on a frictionless surface. What is the frequency of this system's oscillation? So I have fixed a ...
2
votes
0answers
61 views

Can I use the reduced mass principle in a spring-damper system?

http://hyperphysics.phy-astr.gsu.edu/hbase/orbv.html#rm I want to know, if I can use the reduced mass principle to solve a two object spring-damper system. In the books and webpages that I have ...
1
vote
3answers
572 views

Where is the energy lost in a spring?

Thinking about springs, and their extensions, I recently came to a confusion which I hope this wonderful community can help me solve. The question is this. When the block is initially attached to ...
1
vote
1answer
835 views

Confused about relating spring force to maximum distance

I keep working through this problem and getting the wrong answer: A spring with spring constant k is positioned vertically and then compressed from its equilibrium length by a distance Δy. A ...
0
votes
0answers
488 views

Damping ratio and damping coefficient of two objects connected by spring

There are two objects m1 and m2 connected by a spring and a viscous damper (e.g car body and wheel connected by spring) From wiki: $\zeta ={c \over 2{\sqrt {mk}}}$ ζ is damping ratio, c is damping ...
0
votes
1answer
218 views

Minimum separation distance between two masses cushioned by a spring [closed]

I think this problem is much more difficult than what I've learned so far. B) is the problem I'm having a hard time with. I think it is much more difficult to consider because as the red object ...
1
vote
1answer
192 views

Hooke's Law simple question

Just got introduced to Hooke's law Simple Q: Three light springs, each of natural length l and with spring constant k, are arranged vertically between two points a distance 3l apart. One end of ...
2
votes
1answer
92 views

Do I need to take elastic potential energy into account? [closed]

Let's say I have a vertical spring with end points $A$ and $B$ and length $a$ and a mass attached to the endpoint $B$. The mass is dropped from the point $A$ and I need to find the kinetic ...
2
votes
1answer
356 views

Spring system - 3 DoF system and its properties while changing stiffness

I was given the attached 3 degree of freedom spring system with the purpose of analyzing it. I came up with the following equation of motion and then I ran Matlab to calculate the corresponding ...
2
votes
2answers
201 views

Stick and slip motion: mass and spring inside a box model

I am trying to determine a set of differential equation which can describe the motion of a mechanical system as below. Here, at the bottom we have a plate, and a box on top of it. Inside the box, ...
2
votes
2answers
145 views

Is mass proportional to the displacement from equilibrium in Hooke's law?

If I look at Hooke's law as it's defined in my textbook, it looks like: $F = -k\Delta s$ Therefore, the restoring force of an ideal spring will be proportional to the displacement from equilibrium, ...
0
votes
1answer
178 views

Period of small oscillations [duplicate]

A light elastic string is stretched between two points, one lying vertically below the other. A particle is attached to the mid-point of the string, causing it to sink a distance h. Assuming that ...
2
votes
1answer
169 views

What forces are exerted on a clothespin in space?

Let's say a clothespin is modeled as a simple torsion spring as follows. Given: $p_1,\ p_2,\ p_3$: point-like objects of equal mass in 2-D space. All objects float in space, i.e. the center of mass ...
0
votes
2answers
174 views

Spring force vs Spring Potential Energy?

Which strategy should I use to approach a problem? Sometimes I'll use $U= 1/2kx^2$ when I should use $F=-kx$ and vice versa. What are clues in a problem that would let me identify the correct approach ...
1
vote
1answer
72 views

Spring with changing equilibrium

Suppose that we have two cars on a track, each with a different mass. Now suppose that the cars are connected with a spring. We smack one car. I would like to write down the equations of motion for ...
8
votes
2answers
521 views

What will be different if the spring is not massless?

In almost all text, it uses the massless spring as example to illustrate the idea of elastic potential energy. I wonder what's really being changed if we consider the mass of the spring? I saw a ...
0
votes
1answer
876 views

Relationship between angles [closed]

Question: Find the relationship between angles $\theta$ and $\phi$ using the equations of equilibrium and solve for $\theta$. Express your equation for $\theta$ in terms of $\phi$. ...
0
votes
2answers
306 views

Law of conservation of energy and kinetic energy: deformation of a spring [closed]

Problem: A block B of 1,5 kg is attached to the right of a spring (not deformed, with its right side attach to a wall) with a constant of $k = 80 N/m$ and, at rest, the block enter in collision with ...
-2
votes
1answer
165 views

Tension in parallel springs [closed]

A block of mass $200$kg is connected to a horizontal ceiling by four identical light elastic ropes, each having natural length $7$m and stiffness $180$N/m. It is also connected to the floor by a ...
-2
votes
2answers
3k views

Newton Laws of Motion + Effective spring Constant [closed]

! Can someone please help me in solving this question: What is the effective spring constant for the system of the two springs, perfect pulley, and string shown on the left for it to be modeled ...
1
vote
1answer
164 views

Proving Simple Harmonic Motion (direction of acceleration)

A particle of mass $m=0.5kg$, is attached to a spring of natural length $l=0.6m$ and modulus of elasticity $\lambda=60N$, and the setup is on a horizontal smooth table. The other end of the spring is ...
2
votes
2answers
361 views

Rotating spring system: Is my intuition correct?

Consider a solid spherical object of uniform density that is rotating on an axis A1. Perpendicular to that axis one can draw another line that passes through the sphere. On this axis, on both sides of ...
2
votes
1answer
187 views

How do determine the equation of motion of slinky?

I'm trying to analyze the forces exerted to slinky. First, I've divided both ends. The red vector is the force exerted by slinky itself, and the green vector is gravitational force. Force exerted ...
3
votes
0answers
853 views

Effective mass in Spring-with-mass/mass system

Suppose you have a particle of mass $m$ fixed to a spring of mass $m_0$ that, in turn, is fixed to some wall. I'm trying to calculate the effective mass $m'$ that appears in the law of motion of the ...
2
votes
4answers
101 views

The motion of a spring

I have a question about the force set by this spring, I saw many times that $\overrightarrow{F}=-Kx\overrightarrow{i}$. I'm asking why not using $\overrightarrow{F}=Kx\overrightarrow{i}$ without the ...
0
votes
2answers
600 views

Time period for spring connected body

Two identical springs with spring constant $k$ are connected to identical masses of mass $M$, as shown in the figures above. The ratio of the period for the springs connected in parallel (Figure 1) ...
1
vote
0answers
57 views

Does the slinky base stay perfectly level during the initial free fall [duplicate]

In this related question: Slinky base does not immediately fall due to gravity It is observed that the base does not fall immediately. Obviously the center of mass is in free fall, and the tension ...
-3
votes
1answer
96 views

High School Physics student needs help [closed]

A human cannon has a spring constant of 35 000 N/m. The spring can be extended up to 4.5m. How far horizontally would a 65kg clown be fired if the cannon is pointed upward at 45 degrees to the ...
0
votes
1answer
84 views

Period of oscilation [duplicate]

Two masses $m_1$ and $m_2$ are connected by a spring of spring constant $k$ and slide freely without friction along horizontal track. What is period of oscillation? No force influence.