1
vote
0answers
24 views

Accelerating disk [on hold]

A disk of radius $R$ is accelerating to the right over a plane. At $t=0$ the speed and the acceleration of the axle are $v_1$ and $a_1$ what is the velocity and the acceleration of each point (1-4 ...
-1
votes
0answers
14 views

Angular velocity and linear velocity [on hold]

Define and EXPLAIN average angular velocity and acceleration. Define and EXPLAIN instantaneous angular velocity. Experiment was about throwing a cricket ball. the shoulder is the point of reference. ...
1
vote
0answers
35 views

Maximum friction force for a wheel to be able to roll

The wheel with mass $M$ and radius $R$ below is free in space (it is not on the ground). A torque $\tau$ is applied to it through an engine. A horizontal force $F = \frac{\tau}{R}$ is also applied to ...
0
votes
0answers
22 views

How does ground interact with a box rotating around its corner?

I have some questions about how forces $F$, friction force $F_{friction}$, and normal $N$ interact in order to the box below to turn (clockwise) about the red corner, without sliding. The force $F$ is ...
0
votes
0answers
35 views

How to deal with a box on a plane from the perspective of a non-inertial frame of reference?

I'm having a hard time trying to understand how combined translation and rotation happens when analyzed from a non-inertial frame of reference. I've read that second law of motion doesn't apply to a ...
0
votes
2answers
64 views

Why is there a static frictional force on an object that rolls without slipping?

It is clear that if a frictional force must exist on an object that rolls without slipping, it must a static frictional force because the contact point of the object with the ground does not move. I ...
5
votes
1answer
355 views

Centrifugal force affecting satellite

I'm trying to explain the behaviour of a geostationary satellite using different frames of reference. Inertial frame: The satellite has a circular motion with angular velocity $\omega$. The ...
1
vote
1answer
39 views

Inertial navigation system: am I doing it wrong?

I'm trying to develop an inertial navigation system. I can access data from an accelerometer sensor (acceleration on three axes) and gyroscope sensor (angular velocity on three axes). First of all, ...
-1
votes
1answer
74 views

Prove one of the following trajectories is circular

In his classical mechanics lecture, Prof Susskind gives a short exercise, which I "feel" is very simple, but don't know where to start with. The question is: "There is a coordinate system ...
-1
votes
1answer
56 views

Angular velocity of precession

So in my textbook they say this ${\rm d}\theta$ = |$d\vec{L}$|/|$\vec{L}$| $d\vec{L}$ is the change in angular momentum caused by a torque whose vector is perpendicular to $\vec{L}$, which is the ...
6
votes
1answer
170 views

Terminal velocity?

I am having a problem with a particular concept. Here is where I have gotten, since the ball never loses contact with the stair, it will rotate around through the edges, the edges being the pivot, ...
1
vote
2answers
158 views

Rod sliding on a frictionless surface

A uniform rod$(m,l)$ is standing vertically on a horizontal frictionless surface. Gravity is downwards and uniform. I give its upper end a little push and off it goes. I want to find the Normal ...
4
votes
4answers
139 views

Does car have more kinetic energy when turning?

I asked this Phys.SE question Does car lose kinetic energy when turning? Assume a car turning without losing its speed by holding to a point by a rope. IMO, while the car is turning, its kinetic ...
1
vote
1answer
42 views

Is there no problem in thinking of any motion of a rigid body as a composition of translational motion and rotation w.r.t center of mass?

Sometimes when I work on mechanics problems, I wonder if this analysis is always valid. Couldn't there be some motion of a rigid body that cannot be expressed as a composition of translational ...
4
votes
1answer
115 views

Could moving land mass alter Earths gravity?

This is potentially a very stupid question but I'm going to ask it anyway. With all these huge buildings such as the Abu Dhabi Mosque, where an unbelievable amount of materials such as marble was ...
-1
votes
1answer
43 views

Total energy of a body following circular motion

I learned that when a body rotates, its total energy is, $$energy=\left(\frac12\right)mv^2 + \left(\frac12\right)I\omega^2 $$ However, if an astronomical object is orbiting around the earth, is ...
1
vote
1answer
81 views

Reaction force of the ground beyond the equator

Let's imagine a person standing somewhere on Earth, but not on the equator, i.e. somewhere with a positive net value of latitude. Since the Earth spins around its axis and the person spins along, the ...
0
votes
4answers
268 views

Does car lose kinetic energy when turning?

I am writing simple car simulation. Assume non friction, then in straight line the car doesn't lose speed. But what if the car is turning, there should be some kinetic energy loses to change the ...
1
vote
1answer
262 views

Applying multiple forces to one object and calculate net movement and rotation?

I'm working on a small game as a hobby project, and I've run into a problem that would seem simple, to me, but that I can't find any information on or solution to. How would one go about figuring ...
2
votes
1answer
155 views

Integration on a general equation for instantaneous angular acceleration

An equation for instantaneous angular acceleration is given as: $$ \alpha \equiv \lim_{\Delta t\to0}\frac{\Delta \omega}{\Delta t} = \frac{d\omega}{dt} $$ The text I am reading says writing this ...
0
votes
1answer
141 views

Does angular momentum conservation imply that angular momentum $J$ is parallel to angular velocity $\omega$?

In other words, does $\frac{dJ}{dt} =0$ imply $J \times \omega =0$? Counterexamples or proofs would be helpful! EDIT: This question originally asked if $\frac{dJ}{dt} =0 \Leftrightarrow J \times ...
-1
votes
1answer
172 views

Ball on a slope [closed]

I have a lab report, but I can not write it in a correct way. The lab experiment was about a ball rolling on a slope, I have a height of the slope, the distance, and the time in which the ball spent ...
3
votes
1answer
1k views

Example where angular momentum and angular velocity are not parallel

I am unable to visualize any case where angular momentum and angular velocity of an object are not parallel.
2
votes
1answer
586 views

How come a rigid body has 6 degrees of freedoms (DOFs) ? Isn't velocity a DOF?

For rigid body we need to know position of three points and their velocities to determine everything. So that would make 12 DOF. Why do text books say it has six DOFs?
1
vote
1answer
102 views

Landau Lifshitz energy for uniform rotation

Landau Lifshitz claim in their Mechanics book (39.11) that for a uniform rotation we have $ E = \frac{mv^2}{2} - \frac{m}{2} (\omega \times r)^2 + U,$ where the rotation is given by $v' = v + \omega ...
3
votes
5answers
1k views

Veritasium - Firing bullet in block - along center and away from center

This question is about this video on YouTube, in which a bullet is fired vertically into the center of a wooden block from below, sending the block up into the air. Next, a bullet is fired vertically ...
0
votes
1answer
297 views

Rotating frame of reference

Can you help me to do this: Two frames of references $S$ and $S'$ have a common origin $O$ and $S'$ rotates with constant angular velocity $\omega$ with respect to $S$. A square hoop $ABCD$ is made ...
1
vote
1answer
197 views

Problem with a rotating frame of reference on the South pole

Consider this problem: A high-speed train is traveling at a constant 150 m/s (about 300 mph) on a straight horizontal track across the south pole. Find the angle between a plumb line suspended ...
5
votes
1answer
1k views

In tennis, why does topspin serve bounce higher than flat serve?

When receiving servers (while playing tennis), I've noticed that the tennis ball seems to bounce up higher on me when the server uses a topspin serve than when the server hits a flat serve. Why is ...
1
vote
2answers
192 views

Internal/Rotational angular momentum

I have some difficulties to understand the relation between the internal and the rotational angular momentum of a rigid body which is also known as K├Ânig's theorem, so what physical intuition lies ...
1
vote
2answers
546 views

Kinetic energy of a cylinder

It is a long cylinder (you can approx $R=0$), and it has a fixed point in one os its ending points, it's rotating on a plane and I have to calculate the kinetic energy from reference systems situated ...
2
votes
1answer
654 views

How does weight/mass affect angular momentum?

How does weight/mass affect angular momentum? For my 8th gr science fair project I have to do an experiment on angular momentum. My problem is that we have not been taught any of that in physics yet, ...
0
votes
1answer
629 views

Two Different Sorts of Inertia: Inertial Mass and Moment of Inertia

There are two different sorts of inertia: inertial mass and moment of inertia. I am currently reading about moment of inertia. Now, I know inertia is an important concept; with it, we can determine ...
0
votes
1answer
2k views

Finding Constant Angular Acceleration

The question is, "A centrifuge in a medical laboratory rotates at an angular speed of 3500 rev/min. When switched off, it rotates 46.0 times before coming to rest. Find the constant angular ...
5
votes
1answer
165 views

Creating a fair 3 sided coin

I want to make a cylindrical three sided fair coin, with sides: heads, tails, and edge. What should the area of the edge be in relation to the area of the head of the coin? Assume it is all made of ...
2
votes
1answer
4k views

What's the right way to calculate the principal moment of inertia?

I am writing a program that incorporates calculating the principal moment of inertia for a protein residue based on its component atom XYZ coordinates. I am exceedingly confused about which formulas ...
2
votes
3answers
946 views
1
vote
5answers
706 views

Why can mass not be considered concentrated at CM (center of mass) for rotational motion?

Could anyone explain the following expression: Why can mass not be considered concentrated at CM (center of mass) for rotational motion?
2
votes
3answers
1k views

Angular momentum equations

I do not understand this because angular momentum is $L=I\omega$ ($I$ is moment of inertia;$\omega$ is angular velocity) but it I have also seen equations where $L= rmv\sin(x)$. I do not understand ...
1
vote
2answers
1k views

What are the expressions for rotational and translational kinetic energies of a system of point particles?

Consider a system of point particles , where the mass of particle $i$ is $\mu_i$ and its position vector is $r_i$. What are the expressions for translational kinetic energy and rotational kinetic ...