Circular motion about a central point or axis

learn more… | top users | synonyms

5
votes
0answers
99 views
+50

Would time dilation cause a planet to rotate?

For the sake of the argument lets use a black hole so the time dilation effects are greater and the planet in question is orbiting close enough to have significant TD effects but far enough to not ...
2
votes
1answer
75 views

Symmetries of the action of the free classical Klein-Gordon field

I've read that the action for the free classical Klein-Gordon field $$S = \int \mathrm{d}^4x~ \mathcal{L} = \frac{1}{2} \int \mathrm{d}x^4 \left(\partial_\mu \phi(x) \, \partial^\mu \phi(x) - ...
3
votes
3answers
390 views

Would this box on the floor rotate based on friction?

There is a floor that friction is proportional to its velocity (like $F=-kv$) and there is a box with its width as $l$ and its height as $h$. (you may assume that $l$ is longer than $h$). It is on the ...
1
vote
1answer
38 views

Angular velocity and instantaneous rotation axis

Let's suppose that we have a cylinder of moment of inertia $I$ rolling on the floor without sliding, moving with linear velocity $v$ and rotating around an axis passing through the center of mass with ...
0
votes
1answer
29 views

Starting point for a derivation of fictitious forces

I came across this expression at the start of a derivation of fictitious forces: $$(dA/dt)_L = (dA/dt)_R + \omega \times A$$ Where the $L$ subscript refers to the laboratory (inertial) reference ...
1
vote
3answers
1k views

Aircraft Level Flight Trajectory

An aircraft climbs to 15000 feet and enters 'level flight' phase. My basic knowledge of physics says that forces on the aircraft at this time are balanced - as seen in this diagram. Would an ...
1
vote
1answer
24 views

force acting on a small point mass dropped over a rotating rigid body

I came across a situation where I must find the force exerted by a rotating rigid body on a point mass $m$, dropped over it. The rotating rigid body will smash the point mass away in a direction ...
4
votes
1answer
93 views

In 2-dimensional and 3-dimensional universes, stellar systems and galaxies are flat and disky. But what about in 4-dimensional universes?

I just watched that interesting video: https://www.youtube.com/watch?v=tmNXKqeUtJM In 2 dimensions a cloud of particles rotating in a plane is flat by definition since it's in 2 dimensions. ...
1
vote
2answers
73 views

Half-integer spin and infinitesimal rotations

On p. 692 of 'Quantum Mechanics' by Cohen-Tannoudji, he states that: Every finite rotation can be decomposed into an infinite number of infinitesimal rotations, since the angle of rotation can ...
1
vote
1answer
247 views

Is the spin 1/2 rotation matrix taken to be counterclockwise?

The spin 1/2 rotation matrix around the $z$-axis I worked out to be $$ e^{i\theta S_z}=\begin{pmatrix} \exp\frac{i\theta}{2}&0\\ 0&\exp\frac{-i\theta}{2}\\ \end{pmatrix} $$ Is this taken to ...
0
votes
1answer
27 views

In a rolling ball (no slipping) do all points move at the same velocity?

For example does the centre of the ball rotate at the same speed as a point on the surface of the ball?
7
votes
2answers
291 views

Why isn't in counting the no. of degrees of freedom, rotation about the axis running down the length of the molecule counted?

I was reading about the Equipartition Theorem. Then I got the following quotations from my books: A diatomic molecule like oxygen can rotate about two different axes. But rotation about the axis ...
1
vote
1answer
83 views

What are phase conventions in angular momentum and rotation calculations?

I work with complicated angular momentum calculations related to atomic physics; nevertheless, I never need to use anything related to a phase convention (apparently because it's taken care of in a ...
4
votes
2answers
153 views

How do you rotate spin of an electron?

I can't seem to connect these two stories. Can you please help? I have heard that you have to turn electron by 720 degrees in order to get the same spin state. Has this been seen experimentally? How ...
3
votes
4answers
821 views

Puzzling : Relative motion of two points on a rotating disc

Consider two points on a radial line for a rotating disc. One point, $A$, is at the circumference and the other, $B$, is at distance $R/2$ from disc's centre. Relative velocity of $B$ w.r.t. $A$ ...
2
votes
4answers
1k views

Does being suspended in air allow you to not be affected by Earth's rotation?

Let's assume that there was some mechanism by which we could remain suspended in air. By this I mean that our feet is not in contact with the ground. One possible way of doing this would be by means ...
0
votes
3answers
108 views

QM rotation operator

I have seen the proof that for fermions a rotation of $2 \pi$ does not return a spin angular momentum eigenstate to its original form, but instead multiplies the wavefunction by $-1$. Here is an ...
5
votes
5answers
2k views

Video of Earth spinning?

If the Earth is spinning or rotating at a really fast speed, why haven't we seen any videos from space of it spinning when we get a lot of photos of it?
0
votes
5answers
213 views

As a car turns around a circle, why does the force of static friction point towards the center of the circle [duplicate]

A car moves along a flat, circular road. It has a tangential velocity to the road, but the car tires change direction and the car experiences a force of static friction causing a centripetal ...
1
vote
1answer
43 views

Wheel slowing down with constant acceleration

A wheel of radius $R$ spins about its center with a centripetal acceleration of $v^2/R$. I get that the acceleration at all points on the rim of the wheel point towards the center of the wheel. But, ...
0
votes
0answers
27 views

Applying a Force on a non fix body [duplicate]

If we apply a force on a fixed body and if that body rotates, we calculate torque about that pivot point. But if that body is not fixed and then we apply force that provides translational motion and ...
0
votes
1answer
30 views

A fluid in a wide tube being centrifuged

Imagine a large, awkward and imbalanced centrifuge with the glass test tube in the shape of a large rectangular prism, rotating about one of its ends parallel to the sides. Inside this glass test ...
2
votes
1answer
52 views

Does the moment of inertia change?

I am currently working on a practice problem for my upcoming exam and I have difficulties getting my head around moment of inertia. If the ball has mass $m$ and is going around in a circle with ...
1
vote
0answers
31 views

What if you spin a fluid in one direction at center and at the same time opposite direction at outside?

This question keeps me busy for couple of weeks. To be clear, If I put a fluid into a blender and start it, it will spin in one direction. This will create a small vortex. What if I am able to spin ...
1
vote
1answer
60 views

Euler angle rotation - active/passive

I have a very simple problem, that I cannot wrap my head around and is hurting my brain. I have a very simple example of the problem, please consider the the figure below: In the first picture, you ...
2
votes
0answers
57 views

How to get from momentum to force

Situation: I have a solid object (black) attached to a rod (blue) as shown below: The rod is fixed at the top. The solid object is a cylinder as shown, with a rate of rotation ...
0
votes
2answers
41 views

Can center of mass move without any force?

For instance, consider a weight on one end of the ring. Assume that the ring has negligible mass compared to the weight. When the weight splits into two, moves around the ring and recombines at the ...
0
votes
3answers
73 views

Newton's Second law of Rotation

In my book (Halliday Resnick Walker) there is a solved example which is as follows There is a uniform disk with mass $M$ = 2.5kg and radius $R$ = 20cm, mounted on a fixed horizontal axle. A block ...
1
vote
1answer
67 views

Physical interpretation of diffeomorphism from $SO(3)$ to $\mathbb R \mathbb P^3$

I am not good at picturing either $SO(3)$ or $\mathbb R \mathbb P^3$, the latter denoting the real projective space. Can someone give me a rough physical understanding of the geometry and implication ...
2
votes
2answers
64 views

How's equilibrium possible here?

Here's the question.......Two point masses $m$ and $2m$ are attached at each end of a light rod. The rod is pivoted at the center and is free to move in a vertical plane. Then find the angle $A$ when ...
7
votes
3answers
309 views

How does a rotating object cause frame dragging?

Frame dragging is a consequence of general relativity. But I don't really understand it. Of course I can find metaphors like the "honey metaphor" where stirring a honey can move the specks even if ...
-2
votes
2answers
70 views

Torque at a disc sandwiched between two rotating discs

I have a question in my mind regarding torque transfer taking place in the current situation. There are three rotation elements A, B & C as shown in the figure. The rotating element A is ...
3
votes
2answers
62 views

Physics of tidal locking: can the process be underdamped?

Is it possible for a satellite undergoing the process to overshoot the required rotation rate for tidal locking? For example, if its rotation rate is being slowed, can it become slower than it needs ...
0
votes
0answers
75 views

Why and how is acceleration absolute?

Is there a testable model which explains why rotation of an object in space and straight-line acceleration appear to be absolute while uniform translation is relative? I know of Mach's explanation, ...
11
votes
5answers
833 views

Rotation vs translation

What is so fundamentally different between a rotation and a translation that one can be represented with a single n-vector and the other one needs an n-n matrix?
0
votes
1answer
52 views

Rigid Body Dynamics - Calculating Rotation of an Object

I've looked everywhere and I can't quite find a concise answer, especially due to my limited knowledge and understanding of terminology. I found something called Rodrigues' Rotation Formula that ...
1
vote
1answer
51 views

Could someone explain the “revolving frame” to me, as it is used in basic NMR?

I am an undergrad intern at a national lab currently working with a basic proton NMR device. The device consists of two big coils which provide the static magnetic field, and a smaller coil, which ...
0
votes
1answer
57 views

How many times does the ISS celebrate New Year each year? [closed]

My question is, how many times each year do the crew of the ISS have an opportunity to celebrate New Year? Does it vary each year or will it be a fixed number? I tried to work this out for myself ...
6
votes
3answers
758 views

Does the Earth actually rotate around the sun? [duplicate]

Why does one say that the Earth rotates around the sun? There should be no preferred reference frame and from an observer on the sun, the sun will rotate around the Earth.
4
votes
2answers
242 views

Does a tire need to slip to generate force?

Recently, I have been doing some research on racing and tire modelling. While I was doing this, I encountered many curves like those shown below. While I understand the need of slip angles to ...
0
votes
2answers
96 views

Is this a correct understanding of circular motion?

We say an object experienced uniform circular motion iff it moves in a circle of constant radius, with constant angular velocity. To experience uniform circular motion, must the net force on the ...
3
votes
2answers
744 views

Euler angle: space-fixed vs body-fixed axes

I am sooo confused!! Between active and passive, intrinsic and extrinsic, vectors and basis .... Stipulate that we stick to active rotations only. Then Standard derivation of $R(\alpha, ...
0
votes
1answer
26 views

inertial pressure on in a rotating syringe

First question on stackexchange. Hopefully somebody can help me out. I'm struggling to express the following eloquently. I have a rotating syringe tipped with a needle. rotation speed w, with radius ...
1
vote
1answer
34 views

Specific scenario involving rotation and inertial frames of reference?

We recently went over some rotational motion in my freshman physics class, I had a question for the professor on your frame of reference, and how that would effect the rotation of the object. Say you ...
8
votes
5answers
334 views

Can a ultracentrifuge be used to test general relativity?

With today's ultracentrifuge technology, they can spin so fast that the sample can be subjected to accelerations of up to 2 millions Gs. That is equivalent to two solar masses. Has someone tried to ...
0
votes
1answer
1k views

Force acting on a simple rigid body in space

so this is the question that's been bothering me: Say you have a simple rigid body in space that is at rest or travelling with only translational motion at a constant speed. Say that the body is ...
1
vote
1answer
81 views

Rotating metal sphere

My knowledge of physics is not that great, but I am always willing to learn. I have the following question: If we have a sphere made out of metal with a radius of 1 meter, and it rotates in an ...
1
vote
1answer
98 views

Can the angular momentum of any rigid body (symmetrical or asymmetrical) be found this way?

Can the angular momentum of anybody regardless of whether its symmetrical about the center of mass or not be found by finding the angular momentum about its center of mass and summing it up with the ...
0
votes
0answers
93 views

Does non-rotating object have rotational inertia if it is attach to rotating object by a spring

My question relating to the Rotational Inertia as a whole system. As I learn that the Rotational Inertia is defined for a rotating object to an fixed axis but I got problem in the case a rotating ...
1
vote
1answer
48 views

Motion of a rigrid body: Why is motion only a compostition of two forms: rotation and Translation?

If you are in a 2-D space the motion of any rigrid body is composed of 2 different things, namely rotation and translation. If you are in 3-D space the motion of any rigrid body is also composed of 2 ...