# Tagged Questions

31 views

### Energy stored in a battery?

I want to calculate the energy lost from a battery to heat, and the energy stored in a battery. Are these formula's correct? $E_b$ = $I$$V x t E_H = I$$R$$^2$ x $t$ $E_b$ = energy stored in ...
69 views

### Suggest why electrical power input P1 differs from power used P2

We have done an experiment heating water with a wire element and have determined it takes 21.5964 watts to heat 200ml of water to a specific temperature in 10 minutes. However the power of the ...
143 views

### How much electricity can be produced by my thermoelectric generator?

I am using a thermoelectric cooler from a pc's heatsink to produce electricity. Its size is 30mm by 30mm. I will cool it on one side at -10 degree Celsius and the other at 24 degree Celsius. Can ...
72 views

### Which thermoelectric effect is better?

I am doing an experiment which requires the thermoelectric effect. I know about the Seebeck and the Peltier effects. Well, from what I have found till now on these topics is that they both can produce ...
270 views

### Why do high current conductors heat up a lot more than high voltage conductors?

120 volts x 20 amps = 2,400 Watts However, if I increased the voltage and lowered the current, you can also use a smaller wire size (more inexpensive), also have less heat and achieve the same watt ...
328 views

### Calculate water use and design parameters for closed loop wet cooling tower

I am looking to estimate water use at a power plant with a closed loop wet cooling tower system. I have done some reading on cooling towers, but am struggling to connect the equations to a final ...
131 views

### Electric power transmission

If we want to transmit electic current for a long distance, we must minimize a heat that releases because of the resistanse. We cannot make a cable wide because it is expensive and it will be massive. ...
128 views

### What are the properties and impediments of a liquid air fueled engine?

I recently came across a very interesting article that suggested the possibility of using liquified gases like air, nitrogen, or oxygen as a power source for cars. It appears that this company is ...
I'm working through an example I have been given to study. Suppose I have a 2m X 4m photovoltaic panel on my roof that is irradiated with a solar flux of $G_s = 700W/m^2$. Given: $\alpha_s = 0.83$ ...