# Tagged Questions

1answer
44 views

### Torque due to Gravity

I have learned that a torque on an object due to the gravity can be calculated as if the gravity acts on the center of mass of the object when the object is near the surface of the earth. Now I want ...
1answer
54 views

### Falling off a chair, how best to save yourself

If I consider a man sitting on an office chair that reclines backwards iff you lean backwards. What could be done to prevent hin from falling? a) raising his legs till they are parallel to ground. ...
3answers
94 views

### Why doesn't a block rotate due to friction?

In a horizontal surface, a block (cube) is sliding due to a sudden push. When the block slides, there is frictional force which is acting on the block. Frictional force will have a torque around ...
1answer
77 views

### How can a reel of thread move in opposite direction?

There is a nice puzzle about reel of thread. I wonder why the solution works. The puzzle: You take a reel with threads on it. Inner radius r, outer radius R. You put it on a table. If you pull ...
0answers
26 views

1answer
209 views

### Why can you add moment vectors?

My book says the following: If the body is acted upon by a system of forces, the resultant moment of the forces about point O can be determined by vector addition of the moment of each force. The ...
2answers
246 views

### Would this box on the floor rotate based on friction?

There is a floor that friction is proportional to its velocity (like $F=-kv$) and there is a box with its width as $l$ and its height as $h$. (you may assume that $l$ is longer than $h$). It is on the ...
1answer
224 views

### Conservation of angular momentum

We were learning about angular momentum in class today, and although it sort of makes sense, it's much harder for me to think about than linear momentum. So from what I can tell: Angular momentum ...
3answers
2k views

### How does a car's low gear increase power while going slower?

People have always told me that when a car goes into low gear, it goes slower but puts "more power" or "more torque" on the wheels, which allows it to descend slippery slopes or get out of mud traps ...
0answers
652 views

### Torque of a winch with pulleys [closed]

I'm working on a project that involves using a remote-controlled electric winch to raise and lower my bicycle using a pulley system. The problem is that I don't know how much torque will be required ...
1answer
202 views

### How to sum several thrust vector on a single object (like a plane)

I'm a developer. I tried (mostly for fun) to create a realistic physic engine. I try to sum all forces (here thrust) applying to an object in two composantes: an acceleration vector and the angular ...
1answer
134 views

### Why does this screwdriver roll in a curved trajectory?

I am trying my level best to give this screwdriver a horizontal push only, but it is going in a circular path. I thought of uneven friction due to non-uniform normal reaction...what do you think? I ...
2answers
154 views

### How do objects change their axis of rotation?

If I hold a pencil at its end and spin it, throwing it upwards, it will spin about its end, but will soon start spinning around its center. How is this? I would draw the following torque diagram for ...
1answer
149 views

### Find the bending moment of a pole attached to a moving block

I'm having trouble with the following problem. What I've done so far: x-y is the usual coordinate system. $a=\frac{F}{m}=\frac{800}{60}$ and the y component of this is $a_y=a\sin{60^\circ}$. To ...
1answer
411 views

### Direction of the torque

In each one of the following figures there's a pole of length $1.2 \text{m}$ and there's a force $\vec F = 150 \text{N}$ acting on it. Determine the torque that is created by the force relative ...
1answer
2k views

### Calculating the acceleration of a car

I'm trying to calculate the maximum acceleration a car can achieve with the current gear ratio. I am ignoring drag forces and friction to keep it simple. I'm doing this by: calculating the torque ...
2answers
233 views

### Thrust center in space

I have this dilemma: Suppose you have a space ship somewhere in deep space, where there is no drag force or substantial gravity. If the ship has a single engine situated in such a way that the center ...
1answer
2k views

### Is angular momentum always conserved in the absence of an external torque?

Consider either the angular momentum of the earth around the sun or equivalently swinging a ball horizontally on a string. I know that with respect to the point of rotation of the swinging ball, ...
5answers
2k views

### Difference between torque and moment

What is the difference between torque and moment? I would like to see mathematical definitions for both quantities. I also do not prefer definitions like "It is the tendancy..../It is a measure of ...
0answers
638 views

### Neglecting friction on a pulley?

So, this is how the problem looks: http://www.aplusphysics.com/courses/honors/dynamics/images/Atwood%20Problem.png Plus, the pulley is suspended on a cord at its center and hanging from the ceiling. ...
1answer
478 views

### Calculation of torque for motor used in 4 wheel robot [duplicate]

Possible Duplicate: Torque Required For a Motor to Move an Object on Wheels? I want to build a 4 wheel robot. the maximum weight of the robot is approximately 100 kg. and the radius of my ...
1answer
69 views

### If a cart hits a wall, does the weight of it affect how it moves, when the center of gravity is constant?

I have a model that represents a bicycle (a wood block with wheels), and I'm balancing the center of gravity so it's the same as a real bike. However, when the center of mass is kept constant, does ...
1answer
256 views

### Does mass concentration affect the torque induced by a force?

If you had two bodies with the same weight but one having mass concentrated more in the center, while the other had most mass concentrated on the outside, but both had the same center of mass and ...
1answer
279 views

### How can the torque a bicycle experiences be calculated based on the center of gravity, weight and a force?

The position center of gravity of a bicycle and its rider is known, and the distance from it to the point of contact of the front wheel with the ground, in terms of horizontal and vertical distance (x ...
4answers
4k views

### What determines the direction of precession of a gyroscope?

I understand how torque mathematically causes a change to the direction of angular momentum, thus precessing the gyroscope. However, the direction, either clockwise or counterclockwise, of this ...