The study of how the properties of matter arise from its structure at all scales and of how processing can be used to modify those properties (often in pursuit of a specific application).

learn more… | top users | synonyms

-1
votes
3answers
107 views

What can justify the decrease of the electrical conductivity with the increase of light intensity?

I have currently been working with a sample that "appears to" decrease its resistance when I cover it and protect it from light. Basically it presents the opposite behaviour of a photoresistor. What ...
2
votes
2answers
166 views

A few questions about the Fermi Level/Energy

My first question is, how is the Fermi Energy for a material actually determined? I know this derivation, but it seems to say that the Fermi Energy is just based on the electron density (and maybe ...
0
votes
2answers
45 views

What temperature will create amorphous TiSi?

At what temperature will create amorphous TiSi? I think it's around 500 Celsius but I'm not sure.
5
votes
1answer
105 views

Force problem related to adhesive and bonding

I have two PCBs (printed circuit board), and they are glued by adhesives, as show in the pictures. And the location of the adhesives are indicated on the picture (please notice that NO adhesive is ...
3
votes
1answer
228 views

Semiconductor problem: how much Boron is required to establish a certain amount of charge carrier density

The problem description is as follows: Boron is used to dope 1 kg of germanium (Ge). How much boron (B) is required to establish a charge carrier density of 3.091 x 10^17 / cm^3. One mole of ...
3
votes
1answer
99 views

What ring weave disposition should be the most resistant against stabbing and/or how to determine it

In a website that I am studying so I can build a Chain Mail, I have found a page featuring a lot of different Ring Weaves to build them. I want to determine which one is the best to provide ...
2
votes
1answer
42 views

The resolution limit for lithography in practice?

For a given wavelength of light $\lambda$, and a given numerical aperture (NA), I always see the statement in papers/etc. that we can perform lithographic patterning at the Rayleigh limit given by ...
1
vote
1answer
30 views

Why can't a dislocation terminate in the bulk?

We are told that they can only terminate on surfaces, grain boundaries or other dislocations but we are not told why they can't terminate inside the crystal.
1
vote
1answer
720 views

Properties to select suitable materials for making permanent magnets

I have read that soft iron is suitable for making a permanent magnet. Because it is required for permanent magnet to have high coercivity and high retentivity. Same text also said earlier that soft ...
0
votes
1answer
86 views

Ashcroft Mermin Solid State Eq. 22.15

I recently read a paper on Specific heat of a Classical Crystal: Dulong-Petit law. In Eq. 22.15, I don't understand why the ionic displacement $\mathbf{u}$ and ...
0
votes
1answer
78 views

Limits of Poisson's ratio in isotropic solid

For an isotropic solid, Poisson's ratio can be expressed in terms of stiffness constants as: $$\sigma = \frac{c_{11} - 2c_{44}}{2c_{11} - 2c_{44}}$$ Alternatively we may express Poisson's ratio in ...
0
votes
1answer
510 views

Stress due to the mismatch of thermal expansion coefficients of two different attached materials

I'm simulating the thermo-electro-mechanical behavior of a copper wire which is surrounded by silicon dioxide. In other words, the wire segments is under mechanical and thermal loads and at the same ...
4
votes
0answers
55 views

Why does foam dull knives?

I have recently taken up prop making and just started my first foam-built costume from a video game. These kinds of costume armour builds are often built out of the various foam floor mats you can buy ...
4
votes
0answers
133 views

Why does the overhand knot jam but the figure-8 knot doesn't?

After tensioning a rope with an overhand knot in it, it is often very hard if not impossible to untie it; a figure-8 knot, on the other hand, still releases easily. Why is that so? Most "knot and ...
4
votes
0answers
944 views

Inflating a balloon (expansion resistance)

I am doing a quick calculation on how to calculate the pressure needed to inflate a perfectly spherical balloon to a certain volume, however I have difficulties with the fact that the balloon (rubber) ...
3
votes
0answers
33 views

Wall stress of a hexagonal pressure vessel

Problem: I want to calculate the stress in the walls of a hexagonal pressure vessel but I can't manage to get coherent results. For long vessels, cylinders are supposed to have the lowest hoop stress ...
3
votes
0answers
26 views

Aerosol size distribution

When the size distribution of particles in an aerosol is obtained, there is always a bimodal distribution. The small peak accounts for the particles that are in sub-nanometer size range and the larger ...
3
votes
0answers
102 views

What is the theoretical upper limit on the rigidity of a material?

Take a perfectly rigid metal rod of length $\ell$ and some uniform linear density. Place one end at $(0,0)$ and the other at $(0, \ell)$. Over some reasonably short time interval $t$, perhaps on the ...
3
votes
0answers
78 views

Where does one find pair-correlation functions for various materials?

What is the canonical source for finding pair-correlation functions for atoms in various materials? I am interested in both numeric computations and experimental measurements (like might be obtained ...
3
votes
0answers
91 views

Why Does Germanium Spontaneously Extrude Long Screw Dislocations?

Pure germanium is known to spontaneously extrude very long screw dislocations. They are one of the primary reasons for the failure of older diodes and transistors made from germanium; depending ...
3
votes
0answers
55 views

Does graphene actually remain strong for macroworld engineering?

I heard that people envision strong structural materials made out of graphene, but I heard it may weaken when being stack in layers. Is graphene viable for macroworld structural engineering or is it ...
2
votes
0answers
19 views

How can one reasonably theoretically model polycrystalline materials?

Many techniques are taught in advanced solid state courses but they are almost all derived for perfectly crystalline materials. For example, band structure really only appears theoretically when you ...
2
votes
0answers
38 views

Reasons to consider the coefficient of restitution velocity independent - conditions when this does apply

In high-school mathematics textbooks a bouncing ball is often considered as an example of an exponential decay. One can easily derive this if one assumes that the coefficient of restitution is ...
2
votes
0answers
36 views

Is it possible that a battery goes flat faster in a cold environment?

I own an old iPod Classic with original lithium-ion polymer battery and I use it primarily while running. Recently I discovered that when a temperature outside is low, usually below 5 C degrees, the ...
2
votes
0answers
83 views

Bubbling metal vapor through liquid Helium?

When a metal cools from its liquid state, part of the nucleation happens from pre-existing clusters (a group of unit cells of the crystal lattice) already present in the liquid. In the case of a ...
2
votes
0answers
136 views

How can I determine the type of magnet used in a DC motor?

I repair electrical motors in a workshop and sometimes I must repair permanent magnet DC motors and other motors that use permanent magnets. I need to specify type of permanent magnet (Ferrite or ...
1
vote
0answers
69 views

Is there a derivation of all possible Bravais lattices in 2D and 3D?

Do any of you know a (possibly elegant) derivation of all possible Bravais Lattice and the Crystallographic Group of Lattices in 2 and 3 dimensions? Group theory /abstract nonsense approaches are ...
1
vote
0answers
30 views

Twisted Nematic liquid crystal: extent of degradation due to DC drive?

It is commonly accepted wisdom that a Twisted Nematic LCD must always be driven using AC instead of DC, because DC will supposedly denature the LC. I have two questions: Does this effect only happen ...
1
vote
0answers
38 views

AWG chart for Tungsten

This is the American Wire Gauge (AWG) chart page for Copper that I found from Google: http://en.wikipedia.org/wiki/American_wire_gauge Is there a similar table for Tungsten/Wolfram available? Has ...
1
vote
0answers
213 views

Why is my ballpoint pen spatially temperamental?

I'm trying to write with a ball-point ink pen on a plastic[1] sandwich bag. When I try to write on some parts of the bag, no ink transfers to the bag: I can continue trying for quite a while in vain. ...
1
vote
0answers
234 views

Electrical machines: electrical and mechanical properties of steels and cast iron

I would like to know a good source of information for the common metals (steels and cast iron). Information that I need are basically the mass density and the electrical conductivity or resistivity. ...
0
votes
0answers
38 views

What physical properties of silver would contribute to the sound of a musical instrument?

Sorry if this is off-topic. A question was recently asked on Musical Practice & Performance, asking what physical properties of silver would contribute to the sound of percussion instruments. It ...
0
votes
0answers
7 views

Can we say that nanomaterials have higher cohesive energies compared to coarse-grained counterparts?

Can we say that nanomaterials have higher cohesive energies compared to coarse-grained counterparts?
0
votes
0answers
28 views

band gaps in tight binding model

What happens at the zone boundaries of the brillouin zones in the tight binding model? How does the band gap originate in the TB model?
0
votes
0answers
34 views

Types of semiconductor relaxation

Ok, so you've basically got tensile and compression strain in a lattice mismatched material right? So as you're epitaxially layering the material, the strained material is deforming more and more ...
0
votes
0answers
25 views

Heat Sink considerations for thermionic generators

I recently read an article describing thermionic generation. I am considering building a TG for a science fair experiment. I was thinking about surrounding my heat source with a spherical emitter and ...
0
votes
0answers
42 views

A distributed axial load acting on a bar

Normally, when a distributed force is acting on a bar, if it's 'rectengular' we multiply the length with q, but I have no idea what I'm supposed to do at this situation. I first need to calculate ...
0
votes
0answers
38 views

What's the typical material used as a low-k ILD in semiconductors?

Semiconductor companies (namely IBM, Intel, TSMC and etc.) may use different low-k materials as inter-layer dielectric (ILD) in their fabrication process. I'm wondering what is the most typical one. ...
0
votes
0answers
37 views

Finding proportions of metal microstructures from eutectic diagrams

So I have an equilibrium phase diagram of steel and I am asked to 'Calculate the proportion of pearlite in the microstructure of 0.4 wt% C steel just below the eutectoid temperature (727 °C).' I have ...
0
votes
0answers
30 views

When does a crystal take the shape of its Primitive Cell?

I know thought that a crystal, if annealed for long enough at high enough temperatures, will "shed" its higher index (higher energy) planes, leaving only its most stable form. This, I wrongfully ...
0
votes
0answers
78 views

Best material for heat transfer between ice and water

What is the best container material for heat transfer between ice and water? this is a difficult question to ask without displaying a picture of what I'm meaning.
0
votes
0answers
43 views

Can we make any substance that will produce ions at low temprature

I am talking about thermal ionization, Is to possible to make any material or is there any element that can be ionized at let say 20 degree centigrade Temperature? I am a computer engineer and into ...
0
votes
0answers
69 views

Mu-metal electromagnetic core?

Is it possibile to use Mu-metal as an core for a electromagnet? Considering thats is has a very high relative permeability? Low coercive force, and low hysteresis losses. And a very very low magnetic ...
0
votes
0answers
62 views

adhesion(bonding etc.) of materials and frictional force

I am studying material physics. I heard in the class that every adhesion or bonding can occur only with frictional force. Today, I tried to find a proper reference for this statement but I could ...
0
votes
0answers
63 views

Electrical properties of molten gallium arsenide

I'm looking for the resistivity and magnetic permeability of molten gallium arsenide, but can only seem to find the values for the solid material at room temperature (e.g., Wikpedia). Not even ...
0
votes
0answers
14 views

$SiO_2$ PVD deposition to HDPE (plastic)

Is it possible to deposit $SiO_2$ onto HDPE plastic parts (Fresnal Lens)? Will the deposition disrupt infra transmission?
0
votes
0answers
96 views

UV light penetration into silicon

I'm in need of some information about UV (particularly UVA) light's ability to penetrate into silicon. Specifically, I am looking for a relationship between wavelength and penetration depth. Also, if ...
0
votes
0answers
125 views

Is resilience a measure of power expended upon unloading?

I read the definition of 'elasticity' and 'resilience on Wikipedia: Elasticity is a property of materials which return to their original shape after they are deformed. Resilience is the ...
0
votes
0answers
290 views

Whats the contact area for elastic contact between a cylinder and a plane surface?

I am trying to determine the contact area between a cylinder and a plane surface of two different materials so that the plane lies tangent to the cylinder. There is elastic contact between the two ...