The study of how the properties of matter arise from its structure at all scales and of how processing can be used to modify those properties (often in pursuit of a specific application).

learn more… | top users | synonyms

2
votes
1answer
65 views

The resolution limit for lithography in practice?

For a given wavelength of light $\lambda$, and a given numerical aperture (NA), I always see the statement in papers/etc. that we can perform lithographic patterning at the Rayleigh limit given by ...
3
votes
0answers
113 views

Bubbling metal vapor through liquid Helium?

When a metal cools from its liquid state, part of the nucleation happens from pre-existing clusters (a group of unit cells of the crystal lattice) already present in the liquid. In the case of a ...
3
votes
4answers
1k views

How to determine what an object is composed of?

Heads up: This question has never been asked (here) before the way I will ask it here, so let's shed some light on it a bit. Prelude and anecdote(can be skipped): The other day I was walking home, ...
0
votes
2answers
356 views

Stretching a rod? [closed]

The stress applied on a rod is linearly proportional to its strain. But shouldn't the opposite be true? I mean if you pull particles further apart doesn't the force they apply on each other decrease ...
5
votes
1answer
238 views

What is the theoretical upper limit on the rigidity of a material?

Take a perfectly rigid metal rod of length $2\ell$ and some uniform linear density. Place one end (‘south’) at $(0,-\ell)$ and the other (‘north’) at $(0, \ell)$. Over some reasonably short time ...
12
votes
2answers
1k views

Are synthetically-produced diamonds as hard as natural diamonds?

I was having a discussion with my friend about the intrinsic worthlessness of diamonds (DeBeers and whatnot) and how synthetic diamonds haven't caught on, again because of the marketing/propoganda ...
2
votes
1answer
235 views

Pressure applied to flat plate

I have a question about the pressure placed on a plate of material X, how the force is distributed and what would be the material property that would determine its failure. To simplify things ...
0
votes
0answers
263 views

What's the typical material used as a low-k ILD in semiconductors?

Semiconductor companies (namely IBM, Intel, TSMC and etc.) may use different low-k materials as inter-layer dielectric (ILD) in their fabrication process. I'm wondering what is the most typical one. ...
0
votes
2answers
2k views

What causes liquids to have different densities?

We know that different liquids have different densities and it is mass over volume. When the mass is more, then its gravitational attraction will be higher (Compared to other lighter atomic mass ...
8
votes
3answers
813 views

Is an atom-thick sheet of a material visible and tangible?

If one could make a sheet of a material (thickness of an atom), Aluminum for example, would it be visible to naked eyes? What about tangibility? would it be tactile by human finger skin?
1
vote
1answer
140 views

Transparency of gypsum and concrete for RF waves

Is there a database (or any other source) of graphs of average transparency of various materials (cardboard, concrete, gypsum etc.) as a function of wavelength?
199
votes
11answers
43k views

Why don't metals bond when touched together?

It is my understanding that metals are a crystal lattice of ions, held together by delocalized electrons, which move freely through the lattice (and conduct electricity, heat, etc.). If two pieces ...
1
vote
1answer
349 views

In a game of tug of war, what concepts are involved in determining where the rope breaks?

Assume that in a game of tug-of-war the rope ends up breaking. What concepts/factors would contribute to the position of where the rope breaks?
2
votes
1answer
9k views

Calculating force absorbed by compression of a material (i.e. rubber)

Say I was trying to design padding to absorb impacts using polymers or similar materials, such as rubber. I have a good understanding of any relevant physics, most likely, but I wouldn't know where to ...
1
vote
1answer
316 views

Is it possible for a material to shift the frequency of all light reflected off of it by a specific and constant value

Without reducing the energy more than necessary due to the frequency decrease? And if this happens/works, is there an index of such materials and their optic properties?
1
vote
1answer
1k views

Where I can find a torsional stiffness table for different types of stainless steels?

I am trying to comparing the torsional stiffness of different types of stainless steels. I googled the keywords but I could not find any useful information. Would anyone please give me some links ...
5
votes
1answer
267 views

Force problem related to adhesive and bonding

I have two PCBs (printed circuit board), and they are glued by adhesives, as show in the pictures. And the location of the adhesives are indicated on the picture (please notice that NO adhesive is ...
6
votes
1answer
492 views

Why can we skate on ice? [duplicate]

I have known the reason why skate can slide over ice is that water's melting curve in terms of pressure and temperature has a negative slope. If the pressure due to our mass increases sufficiently ...
1
vote
0answers
147 views

Is there a derivation of all possible Bravais lattices in 2D and 3D?

Do any of you know a (possibly elegant) derivation of all possible Bravais Lattice and the Crystallographic Group of Lattices in 2 and 3 dimensions? Group theory /abstract nonsense approaches are ...
-1
votes
2answers
68 views

What temperature will create amorphous TiSi?

At what temperature will create amorphous TiSi? I think it's around 500 Celsius but I'm not sure.
6
votes
1answer
327 views

Why Negative refractive index is negative

$n=\sqrt{\epsilon \mu }$ Negative refractive index happens when permittivity ($\epsilon $) and permeability ($\mu $)of a material is negative. My question is, if permittivity and permeabilitity of a ...
1
vote
4answers
3k views

when we rub objects together, what determines which material will pick up electrons?

For example We know glass when rubbed by silk will become positively charged while the silk will be charged negative. What exactly makes glass appropriate for losing electrons in that experiment? (
2
votes
2answers
294 views

A few questions about the Fermi Level/Energy

My first question is, how is the Fermi Energy for a material actually determined? I know this derivation, but it seems to say that the Fermi Energy is just based on the electron density (and maybe ...
0
votes
0answers
99 views

Best material for heat transfer between ice and water

What is the best container material for heat transfer between ice and water? this is a difficult question to ask without displaying a picture of what I'm meaning.
-9
votes
2answers
312 views

Can a sound like a sonic boom change a object like a wall? And how the light on the walls will be changed after a sound like this? [closed]

Can a sound like a sonic boom change a object like a wall? And how the light on the walls will be changed after a sound like this? .
6
votes
1answer
164 views

Material implementations of the holographic principle

I'm afraid this question is a little too open-ended, but bear with me while I find a better formulation. carbon allotropes (like fullerenes and graphene) are regular patterned. Conduction bands of ...
1
vote
2answers
343 views

Do bifacial solar panels operate at lower temperature than normal solar panels?

Bifacial solar panels have a glass backplane instead of the usual aluminum and are designed to absorb and convert to electricity light incident on either face. Many manufacturers claim that their ...
0
votes
2answers
1k views

Stress due to the mismatch of thermal expansion coefficients of two different attached materials

I'm simulating the thermo-electro-mechanical behavior of a copper wire which is surrounded by silicon dioxide. In other words, the wire segments is under mechanical and thermal loads and at the same ...
0
votes
0answers
56 views

Can we make any substance that will produce ions at low temprature

I am talking about thermal ionization, Is to possible to make any material or is there any element that can be ionized at let say 20 degree centigrade Temperature? I am a computer engineer and into ...
2
votes
4answers
14k views

Why don't FCC metals have a brittle-to-ductile temperature transition?

I initially thought that it had something to do with the number of slip systems in FCC vs. BCC, but they're both the same.
1
vote
3answers
192 views

What can justify the decrease of the electrical conductivity with the increase of light intensity?

I have currently been working with a sample that "appears to" decrease its resistance when I cover it and protect it from light. Basically it presents the opposite behaviour of a photoresistor. What ...
4
votes
2answers
505 views

Why are there direct bandgaps?

This Question has been bugging me for sometime. Some semiconductors have direct bandgaps and indirect bandgaps. So what causes a direct bandgap to occur? The physics behind ,why there are direct ...
1
vote
0answers
65 views

Twisted Nematic liquid crystal: extent of degradation due to DC drive?

It is commonly accepted wisdom that a Twisted Nematic LCD must always be driven using AC instead of DC, because DC will supposedly denature the LC. I have two questions: Does this effect only happen ...
3
votes
2answers
175 views

Can a liquid shrink as something is dissolved into it?

Not much more to add. By shrink, I mean become more dense at the same pressure and temperature. And I don't mean vol(A+B) < vol(A) + vol(B). I'm sure this is possible. Is it possible to ...
2
votes
1answer
601 views

Regarding Bravais lattices

There is 'End-Centered' Orthorhombic lattice . Why this type is not in 'Cubic' lattice ? On which basis did Bravais propose his theory ?
0
votes
1answer
273 views

'Push' in a rigid rod travel at speed of sound or speed of light [duplicate]

Two person, $A$ and $B$, each holding one end of a long solid rod. Now person $A$ pushes the rod on one end. Question: Is it correct that the information that the rod has been pushed will travel ...
1
vote
1answer
124 views

Will a diamond helm be more protective against bullets?

Will a helm made entirely of diamond be more protective against bullets than standard steel or kevlar helmlets?
3
votes
1answer
3k views

What causes stress concentration (aka stress risers/raisers) at corners?

I've read a few explanations about why stress concentration occurs at sharp corners but I don't find the explanations intuitive. Can anyone explain it perhaps using an analogy such as atoms "holding ...
4
votes
3answers
311 views

How to block neutrons

What is a good way to block neutrons and what is the mechanism that allows this? It's my understanding that polyethylene is somewhat effective. Why?
0
votes
0answers
21 views

Estimating the fatigue life of elastomer diaphragm [duplicate]

Disclaimer: I have asked this question before, but it got put on hold because it was judged as off-topic. I happened to disagree and explained my reasons in the comments, but they have been ignored, ...
2
votes
2answers
126 views

Do all impacts create a wave-like disturbance in the medium through which they travel?

There is a scene in the first Matrix movie, where a helicopter strikes a skyscraper. The most interesting part is the 'slow-motion' bit where, as the helicopter strikes the building, a wave first ...
7
votes
3answers
3k views

Is there a Tungsten alloy more dense than gold?

This thought came from researching a previous question. In the spirit of our get-rich-quick scheming I looked up element densities and prices near gold. Element (g/cm^3) (dollars/kg) Uranium ...
6
votes
3answers
279 views

Hollow gold bar

A scammer got a hollow gold bar and fills it with a combination of lead and air, with the same average density as gold. What's the simplest way of discovering the fraud? I know that x-rays will see ...
25
votes
3answers
13k views

If aerographite is lighter than air, why doesn't it float?

Air is 6 times denser than aerographite but looking at pictures or videos presenting the material, I see it resting on tables rather than raising to the ceiling. Also, since the material is made of ...
13
votes
2answers
900 views

How is graphene a 2D substance?

How is graphene a 2D substance? It has length, width and some thickness to it, else it would be invisible. Why is it considered a 2D substance?
0
votes
1answer
92 views

Is this the strongest steel?

I found this link where it described steel with UTS at 5200 MPa (755kpsi), is this the strongest steel or just a typo because value is seemed to be unreal?
0
votes
1answer
193 views

Heat Sink Design-Choice of Material [closed]

I am currently designing a heat sink for OPA 549. Among the many considerations, for example, the choice of material, the geometry of heat sink, the design of fins and all the parameters that come ...
2
votes
1answer
253 views

Abacus about the thermal expansion of copper

I am currently working on the measurement of the coefficient of thermal expansion of copper. In order to compare my experimental results with theory or experiments made by others, I am looking for ...
1
vote
0answers
243 views

X-Ray transparent material [duplicate]

I am looking for a material which is fully transparent to X-rays. In addition, it should be solid enough to serve as a substrate on which I will deposit some biomolecules.
0
votes
0answers
82 views

adhesion(bonding etc.) of materials and frictional force

I am studying material physics. I heard in the class that every adhesion or bonding can occur only with frictional force. Today, I tried to find a proper reference for this statement but I could ...