Light Amplification by Stimulated Emission of Radiation. A means of creating coherent light by either driving an atomic or molecular transition in an optical cavity or firing a beam of electrons through an undulator.

learn more… | top users | synonyms (1)

1
vote
1answer
157 views

Ideal four-level Gain Medium (or just any old gain medium)

What exactly is happening in a laser's gain cell when the irradiance is greater than the saturation irradiance? Also can someone offer a clear conceptual treatment of the gain-coefficient and its ...
3
votes
1answer
1k views

Beam splitters- Direction of use

There are two cases I'm asking about. The square in the middle is a cube beam splitter in the same orientation for both cases. We are looking at the beam splitter from the top. In the first case, ...
4
votes
5answers
17k views

Free Optics Simulation Programs

I'm having an extremely difficult time finding an optics program that is easy to use and offers accurate physics simulations. I'm not asking for much, I just want to be able to simulate a laser going ...
1
vote
1answer
481 views

Calculating laser wavelength/power to cause emission of light in a gas?

I've become interested in volumetric displays. In particular I'm looking at a pair of lasers scanning a volume of gas such that the intersection of the lasers would supply enough energy to cause the ...
3
votes
2answers
363 views

Redirecting light beams from beam splitters

I'm doing a project where I am taking a laser beam and sending it through a beam splitter. As I understand, approximately 50% of the light will go pass through and 50% will be reflected. So this means ...
13
votes
4answers
5k views

Tried to do the double slit experiment, failed. Why?

I tried, and failed, to do the double-slit experiment. I thought I had a good experiment setup, but obviously I was wrong. Can anyone offer some insight in what I might have done wrong? Most of ...
4
votes
3answers
303 views

Water Jet Cutter and Laser

I watched a video of "Glass cutting" which uses a Water Jet Cutter. It was said that Cutting glass simply by machines would eventually crack it... So, They're using grains of sand (by placing a sand ...
-2
votes
3answers
315 views

A Different Lasing Medium [closed]

Powerful lasers are highly intense, diverge negligibly and are also coherent. These radiations are emitted through partially reflecting mirrors after simultaneous reflections within the lasing medium. ...
5
votes
1answer
152 views

Optical laser pumping and reflectors

Let's say we are building Nd:YAG laser. It is optically pumped by some linear xenon flash lamps, it absorbs light around 750nm and 800nm, and emitted light is at 1064nm. The question is why doesn't ...
2
votes
0answers
93 views

Macroscopic chromodynamics

Lately I've been reading about gamma ray lasing phenomena, and I've been wondering about the applications of this. More concretely, the above fantastic question led me to wonder if we could somehow ...
1
vote
1answer
213 views

Does Combining Lasers Add to Their Power?

For example... If I had a 2W green laser, a 2W red laser, and a 2W blue laser, could I combine them using crystals to form a 6W white laser? Or is that now how it works? If not what would be the ...
1
vote
2answers
371 views

Why does heterodyne laser Doppler vibrometry require a modulating frequency shift?

On the wikipedia article (and other texts such as Optical Inspections of Microsystems) for laser Doppler vibrometry, it states that a modulating frequency must be added such that the detector can ...
5
votes
1answer
69 views

what general physical arguments discredit induced emission of nuclei?

trying to read a bit about "quantum nucleonics", i've encountered this rebuttal from people at Livermore that induced radiation stimulation of Hafnium nuclei is possible. Something that catches my eye ...
3
votes
1answer
377 views

gamma ray lasers?

Is it really possible in the foreseeable future to create a gamma ray laser? I've read these two articles on Wikipedia: the Hafnium controversy Induced gamma emission It sounds pretty amazing, ...
0
votes
1answer
103 views

Density and statistical models for visible air dust

If a laser beam is looked at from the side versus a dark background, a sparkling effect can be seen caused by dust particles in the air hit by the beam. Is there any simple model or coarse ...
0
votes
2answers
187 views

Image contrast as function of exposure for a CCD detector

In a laser interferometry experiment, we project a pattern of interference fringes onto a CCD sensor. For best results, we want good contrast between the bright and dark fringes, and we carefully ...
25
votes
2answers
824 views

Why does laser light not affect glowing materials?

I have this childrens rubber ball which glows in the dark after it's exposed to light. I "charge" it with a flash light then play with my dogs at night. I thought to try a very intense green laser, ...
4
votes
2answers
608 views

Optical Drive Physics

I have been recently wondering how is data stored on and retrieved from optical devices like CDs, DVDs, and Bluray. What makes these different storage types different from each other?
0
votes
1answer
132 views

Can the inverse of a laser exist?

Speaking as a layman, I understand a laser works by exciting an electron so it returns to rest by emitting a photon. Is it feasible to 'damp' the energy level/s of an electron so it absorbs energy ...
3
votes
1answer
308 views

What is the optical power level of common fiber optics lasers?

In the book Nonlinear Optics, it is stated that the nonlinear effects start to become a problem in WDM systems (around 1550 nm) after about 1 mW of optical power. However, I measured the optical power ...
5
votes
2answers
342 views

Did anyone claim that quantum theory meant lasers would never work

I've been reading 'How the Hippies saved Physics', which describes a design for a superluminal communication device, of which the crucial part was a laser which duplicated an incoming photon many ...
2
votes
1answer
233 views

Why does a coulomb explosion induce fusion?

If you strip the valence electrons apart with a very short intense electromagnetic field the remaining core explodes in a so called coulomb explosion. But experiments have shown that under certain ...
2
votes
1answer
474 views

Validity of Einstein Coefficient Derivations

Consider a two-level energy gap with electronic energy states $E_1$ & $E_2$ and associated population densities $n_1$ and $n_2$ with $E_2>E_1$. In the derivation of the Einstein coefficients ...
0
votes
1answer
402 views

How does a Blu-Ray work? [closed]

I've just bought a BluRay, and I want to know how it works. I'm not searching for a high-level scientific explanation--just a simple answer.
8
votes
2answers
654 views

How does infrared light 'erase' phosphorescence on zinc sulfide?

I found some sheets of zinc sulfide in my basement that phosphoresce green for up to 24 hours or so after exposure to bright light in the violet range or shorter. One of the first things I tried was ...
2
votes
1answer
302 views

What is 'tilt locking' of a laser cavity?

In another question, jasonh mentions a scheme for locking a laser to a resonant cavity called 'tilt locking': The signal is used for locking the frequency of a laser to a high finesse cavity. The ...
4
votes
1answer
770 views

Turn-on delay time for Laser diode

Do you know any simple explanation on the reason why the turn-on delay time on a laser diode is reducing while we increase the bias current? Turn on delay,is the time that the laser needs from the ...
0
votes
1answer
866 views

Increase of threshold current by temperature in a laser diode

I read somewhere that if we increase the temperature of the material in a laser diode the threshold current for lasing also increases. Can someone explain to me why is this happening? What is the ...
2
votes
1answer
148 views

Consistently oscillating micron sized particles in a liquid

I have an idea that would involve the measurement of an oscillating substance whilst the substance is immersed in a liquid. However, the method that I would use to measure the frequency of these ...
7
votes
4answers
27k views

What makes some laser beams visible and other laser beams invisible?

What makes the beam of some lasers: 1-visible? such as the ones used in clubs or such as the laser pointers sold at amazon which if pointed to the sky look like a solid visible beam of light ...
1
vote
2answers
2k views

Can energy be extracted from clouds?

Can cloud charge imbalance be used as an energy source? First off quite some energy must be present in clouds: a lightning path is quite long, and electrical breakdown of air requires about 1MV/m. ...
1
vote
0answers
137 views

What narrow-linewidth laser system runs at 2100nm with 1W of power?

For an experiment at our university we need a laser that runs at about 2.1 μm (about 20nm higher or lower would be fine too. We have found a multitude of lasers that achieve this (typically Thulium- ...
4
votes
1answer
622 views

Focusing laser & off-axis illumination & diffraction limit

I've thought I had a good understanding how resolution enhancement tricks works for projection lithography, until I tried to understand if it's possible to get sub-diffraction performance for focused ...
4
votes
2answers
2k views

Can 2 beams of ultraviolet light intersect and be visible where they intersect?

Is it possible that if you have 2 ultraviolet lasers, that are invisible to the human eye, and if you aim their beams to intersect at some point, that the place of intersection will show a lower ...
2
votes
0answers
315 views

Levitation rotation speed involving laser acceleration, pyrolytic graphite and a vacuum

The experment would involve a small NIB magnet levitating between or on the diamagnetic material pyrolytic graphite, unlike other forms of levitation this doesn't require power to run such as ...
0
votes
1answer
6k views

laser spectral width vs. linewidth

I have been racking my brains over the differences between laser spectral width and something called the linewidth. The linewidth was written about in detail by Henry in 1982. The spectral width is ...
4
votes
1answer
138 views

What theories allow for “Tractor Beams”?

NASA recently announced $100k grant to study the possibility of using laser tractor beams. What tractor beam concepts have been published but not been dis-proven?
4
votes
1answer
255 views

what is the probability distribution for the angle of an approximate laserbeam

I'm trying to simulate the light distribution characteristics from a Gaussian laser beam, but having difficulty with the angular distribution. I need to generate a large number of points on an x/y ...
4
votes
2answers
172 views

Optical element is heated by laser: is it possible to get oscillating heat distribution?

Imagine that we have thin optical element, which is irradiated by laser. Laser heats element, so there is some heat distribution in element. There is a heat sink through upper and lower element faces ...
2
votes
1answer
345 views

What's the big deal with Nd:YAG rods?

I see the prices of Nd:YAG rods for lasers, and could someone explain why they are so expensive? Do they need to be mono-crystalline or something? Will Nd:YAG laser work with ...
4
votes
1answer
302 views

Laser frequency tripling

I've heard that common way to get 354nm laser is to triple 1064nm Nd:YAG one. But how to make non-linear crystal to do tripling instead of doubling? What are the best crystals for tripling and what's ...
2
votes
2answers
420 views

Why we don't see long range airborne CO2 lasers?

I wonder, why http://en.wikipedia.org/wiki/Boeing_YAL-1 is not CO2 one? Are the issues with air transparency at 10um? Or it's impossible to focus on large distances due to diffraction?
5
votes
2answers
1k views

Line width of green DPSS laser

Could someone suggest what is the line width/mode stability/coherence length of generic cheapo green (532nm) DPSS laser? I've found lots of nice info here: ...
2
votes
0answers
228 views

How is the “negative dispersion” derived?

I'm looking at Kopfermann H., Ladenburg R., Nature, 122, 338-339 (1928) and it appears Ladenburg in Ladenburg R., Z.Physik, 4, 451-468 (1921) was the first to discover the phenomenon of "negative ...
5
votes
4answers
577 views

Why isn't V. A. Fabricant given the credit for the discovery of the laser?

In another question here I asked for help in finding old Russian papers in physics and as an example I gave the founding papers on the laser by Basov and Prokhorov (from 1945 and 1954). In an answer ...
6
votes
2answers
527 views

What makes excimer lasers so complex, rare and expensive?

We all can agree that UV lasers are extremely useful, but we (poor majority) are still struggling with 355nm DPSS ones, while excimer lasers being prohibitively expensive (let's say at 1-10W average ...
3
votes
2answers
1k views

Propagation of light in transparent media: absorption and reemission or scattering?

In the two Phys.SE questions What is the mechanism behind the slowdown of light/photons in a transparent medium? and Why glass is transparent? transparent media were discussed. But I'd like to clarify ...
13
votes
3answers
7k views

Physics of Focusing a Laser

The temperature that a solar death ray can produce is limited due to the solid angle of the sun itself. Entropic arguments dictate that you can't focus the sun's light to create temperatures higher ...
5
votes
3answers
437 views

Laser beam shaping

Hi I like to build a laser pointer that reflects different shapes for a project I am working on. I know this can be done with Diffractive Optical Elements. Are there other options? DOEs are expensive. ...
1
vote
4answers
2k views

How can a laser pointer have range of several kilometers in atmosphere?

Laser pointers manufacturers claim that some pointers have range of several kilometers. Okay, they use a powerful laser, but that powerful laser usually has power less than one watt. Okay, the laser ...