Questions tagged [imaging]
The imaging tag has no usage guidance.
178
questions
1
vote
0
answers
13
views
Transition from Coherent to Incoherent Light / Partially coherent Light for Imaging
I want to know how to model partially coherent/incoherent light for imaging applications.
Usually, you find mathematical treatments of imaging just for the extreme cases.
For the coherent light, there ...
4
votes
1
answer
283
views
Why do we see a black hole shadow despite the fact that there is hot gas all around it and not all radiation is absorbed by the horizon?
If the accretion disk surrounds the black hole but is too far away from the black hole to have its light captured, why do we still see a black shadow? Is the 'shadow' not covered from our perspective ...
0
votes
0
answers
89
views
Classical Ghost Imaging not reproduced from the setup
I have been trying to reproduce classical ghost imaging(for reference, see this). You can check the setup that I have done
The light beam from the collimator has beam radius of about 0.8 mm.
\begin{...
0
votes
1
answer
36
views
Correlation time of speckle pattern
I am setting up classical ghost imaging. I am trying to reproduce the results by this paper. It mentions that crucial things to get the experiment to work is spatial incoherence and measurement time ...
0
votes
0
answers
37
views
If lidar is used underwater, would passing through a turbulent surface into a pocket of air (e.g. a "moon pool") distort the resultant image at all?
I have zero experience with lidar systems, but I have been under clear water and looked up at the interior/ceiling of an indoor pool, and even the slightest turbulence at the surface distorts what I ...
0
votes
0
answers
42
views
Second-order variation of an integral
I was reading the paper SISAR Imaging for Space Debris based on Nanosatellites, in which the Fresnel-Kirchoff diffraction formula is applied for a scenario in which the receiver, transmitter and ...
1
vote
1
answer
23
views
Slice selection in MRI
Studying MRI, I found that excitation is done by applying B1 (RF) and Gz simultaneously.
But, I think that if those are applied at same time, slice selection cannot be done correctly because Gz will ...
1
vote
0
answers
25
views
Causes of diamond shaped gaps PET image
I'm a math student, and I'm studying about inverse problems in specific reconstruction of PET images, but I have a problem understanding some things. Some sinograms have black diagonal lines, after ...
1
vote
2
answers
213
views
How does 2f-2f lens configuration work?
Say I want to image a shape which is cut out on an Aluminium sheet. If I am passing a laser through the object in a setup like the image below. What I don't understand is why is there a need of ...
0
votes
0
answers
19
views
Super resolution with STED microscopy and evanescent waves?
Consider the angular spectrum method, given a field $U$ with a wavelength $\lambda$ we can decompose it with Fourier transform.
\begin{equation}
U(x, y,0) = \int \int {\tilde{U}_0(f_x,f_y)} e^{2 \pi ...
0
votes
0
answers
47
views
Connection between the Modulation Transfer Function (MTF) and Line Spread Function (LSF) in "Hecht - Optics, 5th ed"
I try to understand the derivation of the connection of the MTF and the LSF and found a derivation in the Book "Optics" by Eugene Hecht (5th edition), chapter 11, section 11.3.6.
However, ...
0
votes
0
answers
97
views
What is the benefit of using entangled photons for ghost imaging compared to just spatial correlated photons?
I am planning to work in quantum ghost imaging. I will be using a type 2 entangled spdc source which is already there in the lab. I need to know what will be the effect of using polarization entangled,...
2
votes
1
answer
86
views
My phone sees the NIR from a TV remote. Why does it not see the NIR in rainbows?
My Pixel phone's camera shows the IR light from the LED of a TV remote as a magenta/lavender color. That wavelength is likely around 940 nm.
Now, when I take a picture of a rainbow in the sky, it does ...
1
vote
1
answer
128
views
What exactly is deconvolution doing?
The widely recognized theory for the detected image in microscope (I believe) is calculated by taking the convolution of the object and a point spread function (PSF). Deconvolution tries to reverse ...
1
vote
1
answer
212
views
Why are CT scans much smaller than the raw data?
I'm not too familiar with CT, but I worked with medical CT images long ago, and recall that the raw data, recorded by the scanner was way bigger than the 3D image itself (Both were 16-bit TIFF files, ...
0
votes
2
answers
50
views
Is it posisble to have multiple obejcts in focus provided that parallel ligthrays pass through them? [closed]
I have the following setup, with a light source, 4 mirrors (two concave and two flat) and a 200mm lens, plus a divergent lens.
In the parallel section of the flow, I have a translucent background (in ...
0
votes
1
answer
345
views
Calculating the power received by a pixel from a set of rays
I've written a path tracer and am now working on implementing a physically accurate way of simulating the actual sensor response for a given wavelength$^*$, given an exposure time, aperture size, ...
1
vote
1
answer
228
views
4f Imaging System with cylindrical lenses
I have seen an imaging system (4f) which uses two cylindrical lenses in a 4f configuration, but with an extra cylindrical lens at the fourier plane. How does this work?
Edit: Posting an image of the ...
2
votes
1
answer
47
views
Does the substage condenser numerical aperture cap total resolution of an imaging system?
Amongst formulas to estimate the theoretical resolution of a transmitted light microscope, I often see:
$$
\delta = \frac{1.22\lambda}{NA_{obj} + NA_{cond}}
$$
Where $NA_{cond}$ is the numerical ...
1
vote
1
answer
33
views
Can neutral density filters be substituted by other parameters of the imaging system in any context?
One of illuminators in my imaging system has a built-in neutral density filter. I am considering removing it and changing the exposure time of the imaging system's camera to compensate for the ...
1
vote
0
answers
137
views
What is the Point Spread Function of a pinhole camera?
Is the geometric spread of a pinhole camera a uniform blur convolution?
Pinhole cameras have blur due to a. wave effects (diffraction) and b. ray effects (geometric properties). This question ignores ...
2
votes
1
answer
50
views
When building an optical system, how can I increase the size of the useful image?
I am trying to put together a system of lenses that has a probe with a 2 mm diameter. The system has a probe with an objective and a relay and a set of lenses with a larger diameter that function as a ...
0
votes
1
answer
87
views
Is Terahertz SAR imaging of Earth possible?
The Terahertz band is at the Wavelength range of 1 mm to 100 μm, which is very good for synthetic aperture radar aka SAR since the shorter the wavelength the better angular resolution you get. ...
0
votes
2
answers
71
views
How the resolution of an image change when it is out of focus?
do you know if does exist a relationship between resolution and out of focus imaging?
For example given a lens, an aperture and a distance d. How can I calculate how much out of focus is an object ...
0
votes
2
answers
214
views
Can radar detect electrical fields?
Can we create a radar image of electrical fields, or this is even possible?
Do we need a detector opposite the emitter or does reflection work?
(see figure.1)
0
votes
0
answers
62
views
So what do we really see in the image of the black hole?
I have already read this question - Orange ring in a black hole image
And also have seen several videos about it (Specificaly one from Veritasium -https://www.youtube.com/watch?v=zUyH3XhpLTo&...
0
votes
1
answer
76
views
How does MRI distinguish information between in-plane localization and slice selection, despite both using frequency encoding?
A MRI machine can generate 3D image of a human brain. A 3D image have three axis x (horizontal), y (vertical) and z (head-foot). First, a slice along z were selected using frequency encoding. Then, ...
1
vote
1
answer
121
views
Temporal vs Spatial Contrast in Speckle Contrast Imaging
I have been reading about Speckle Contrast Imaging recently. Its quite an interesting topic given that it should be possible with relatively inexpensive equipment. The basic premise from what I ...
1
vote
1
answer
273
views
Why bi-telecentric lens works with a finite focal length while it should be afocal system?
I bought a bi-telecentric lens for experiment. From all I've learned before, it accepts only axis-parelle incoming beams and exits the same parelle light, so it should be an afocal system with ...
0
votes
0
answers
40
views
Entaglement and causality violation. Devices that detect pure states
I have not seen a similar question to mine on the site. Please forgive me if there is any.
When I studied quantum mechanics and the entanglement phenomenon, I was told that, although when one wave ...
2
votes
2
answers
361
views
How does x-ray attenuation compare to sound wave attenuation?
When it comes to medical imaging (x-ray and ultrasound specifically) there seems to be a difference between the attenuation of sound and x-rays.
What I am gathering is as follows:
When it comes to x-...
1
vote
1
answer
206
views
How pinhole camera works? [closed]
What is the working principle of pinhole camera? What is the function of translucent screen in the camera? Now, if we look behind the translucent screen, what do we actually see: the image formed on ...
1
vote
1
answer
423
views
Simulate a camera PSF?
Say I have a $3D$ object stored as a $3D$ $\texttt{NumPy}$ array in python. I want to view this $3D$ object as a camera would give: a particular aperture, focal length, etc. My understanding is I can ...
1
vote
1
answer
48
views
What is the technology that uses a rectangular mask to do high focus imaging?
There is a newly developed technology that involves using a specialized mask to resolve images without the use of a lens. The technology potentially allows the imaging system to avoid limitations ...
3
votes
1
answer
230
views
Is it possible to take long-distance X-ray images at a high resolution in Earth's atmosphere?
It's my understanding that different wavelengths of EM radiation are affected by scattering and attenuation to varying degrees. Would a camera using only X-rays be able to take a picture of something ...
2
votes
0
answers
74
views
Why is the Point Spread Function of a diffraction limited lens the Fourier transform of the Aperture Function?
I understand that only part of the spherical wave emerging from a point source in the object plane can be captured by the lens and so only a partial converging wave creates the image as shown on ...
0
votes
1
answer
241
views
How do I apply Zernike coefficients to a wavefront?
I have been using the textbook "Numerical Simulation of Optical Wave Propagation with Examples in Matlab" (pdf available online: https://www.academia.edu/42684537/...
0
votes
0
answers
126
views
How can the Fourier delta function produce different matrices in single-pixel imaging?
The pattern in the masks used for single-pixel imaging are created applying equation $(1)$,
$$P_\phi (x,y) = \frac{1}{2} \left[ 1 +| F^{-1} \{\delta_H (u,v) e^{i\phi}\}|\right], \tag{1}$$
in which the ...
1
vote
1
answer
95
views
Is it possible to get a resolution that is better than what is given by the Rayleigh criterion?
I remember reading recently that it is possible to unblur a face that has been blurred by using a computer to process multiple images of the blurred face from different angles. This got me thinking, ...
0
votes
1
answer
69
views
Does it makes sense to interpret the Point Spread Function as a volumetric density of energy?
The Point Spread Function (PSF) of an imaging system is its impulse response. Therefore
$$ I(x,y,z) = \left[O \star PSF\right](x,y,z) $$
where $I$ is the image, $O$ is the object, and $\star$ is the ...
0
votes
1
answer
53
views
How does a transformation domain differ from a spatial domain?
In the context of single-pixel imaging, the following statement is given:
"Global transformation has a property that each point (coefficient) in the transformation domain
is a weighted sum of all ...
0
votes
1
answer
42
views
Why does CW imaging not provide the same data as Pulsed imaging?
"Unlike pulsed THz imaging, the CW imaging (...) only yields intensity data and does not provide any depth, frequency-domain or time-domain information (...)." [1]
Why does a pulsed signal ...
0
votes
1
answer
139
views
What's limiting the field of view of a lens
An ideal lens with finite aperture leads to the formation of an image in the image plane as
\begin{equation}g(x, y) = \int \text{psf}(x/\lambda d - x', y/\lambda d -y') f(x', y') dx'dy',\end{equation} ...
1
vote
0
answers
35
views
Glow around objects in AFM image (amplitude modulation mode)
I have made an AFM scan (Amplitude modulation mode) of a sample consisting of polyethylene in a matrix of polystyrene. I have tried to figure out why there appears a 'glow' around the domes of ...
1
vote
1
answer
86
views
Imaging aberration
Qs: Doesn't a curved side lens produce less aberration than a flat lens in general because the overall angle of deviation is smaller in the curved lens?
Consider the following experimental results ...
1
vote
1
answer
237
views
Why does MRI (Magnetic Resonance Imaging) have high contrast and spatial resolution albeit having lower frequency and higher wavelength?
So we've been discussing this in the classroom and I really can't say if my answer to this question is correct since there could be various answers to this.
I know that to have a high-resolution image,...
-2
votes
3
answers
171
views
How to feel energy so I can imagine it? [duplicate]
Please tell me what is energy in reality and how can I imagine it . Please don't rearrange the question . Thanks
0
votes
1
answer
42
views
Implement EPR Imaging deconvolution
I have bruker's EPRI data and I want to deconvolute it.
I read some article, that says
$$
f(r) = x(r) \circledast g(r) \\
F(ω) = X(ω) \times G(ω) \\
X(ω) = \frac{F(ω)}{G(ω)}
$$
$f(r)$: imaging spectre,...
1
vote
0
answers
45
views
In Quantum imaging with undetected photons, why is the idler photon sent through a second non-linear crystal if it is then discarded?
I've been reading up on quantum ghost imaging and other similar approaches. In particular, I'm reading a paper Quantum Imaging with Undetected Photons by Gabriela B. Lemos et al and trying to ...
1
vote
1
answer
98
views
Could we take an image of a fundamental particle?
I would like to know is there any physical limitations that prevent us from imaging a fundamental particle in someway? The Planck length gives us a limit to measurability wrt distance, is this the ...