# Tagged Questions

0answers
29 views

### Finding the work Done by Normal force? [on hold]

The problem is as follows: There is a Right Angled Wedge fixed in an box against left wall. The angle of incline of the wedge is 45 degrees from the horizontal. The height of the wedge is same as ...
1answer
32 views

### Pushing a crate on a friction floor [on hold]

A man is pushing a crate at a constant velocity. there is a friction between the floor and the crate of $$\mu =0.41.$$ The pushing force is directed downward at an angle $\theta$ below the ...
1answer
54 views

### Massive ropes and tension

Consider the diagram bellow, a massive string hanging in equilibrium My question is this: Can we take any 2 random point on the rope, say A and B and then use $\sum F=0$ on the rope between them: ...
0answers
24 views

### Find out angle of a projectile [on hold]

For a projectile launched from a point on horizontal ground, the speed when it is at the greatest height is 25−−√ times the speed when it is at half of its greatest height. Determine the angle of ...
1answer
22 views

### What is the work done below proportional to? [on hold]

A raindrop falls from a certain height to the ground, with a terminal velocity u. The viscous force is F = 6*3.14*n*r*v, where n is the coefficient of viscosity, r is the radius of the raindrop, and v ...
0answers
24 views

### Similarity in two events from Dynamics point of view [on hold]

What is similar from dynamic point of view between book lying stationary on horizontal table and rain drop falling down with constant speed? I can find two similarities Force acting on them is ...
2answers
30 views

### Finding coefficient of friction between block and plane [closed]

An inclined plane makes angle $\theta$ with horizontal. Upper half plane is perfectly smooth where as lower half is rough. The block of mass m starts sliding from top. If the block again comes to rest ...
0answers
21 views

### What is the angle of projection when at maximum height the speed of a projectile is half the speed at half the maximum height? [closed]

I have been struggling with this problem: The speed of a projectile when it reaches its maximum height is one half of its speed when it is at half its maximum height. What is the initial ...
1answer
28 views

### Modeling a stool with three legs pushed on one leg

If a stool with three legs is pushed (horizontally) on one leg in the direction of the axis passing through the other two legs, it starts both moving and rotating. Is it correct to assume 1/3 of ...
1answer
44 views

### Will A Vertical Projectile Travel the Same Distance as A Horizontal Projectile

If a projectile is fired vertically from an initial height, $h$, above ground level, and an identical projectile is fired with equal initial velocity from the same initial height in the horizontal ...
1answer
66 views

### Finding equilibrium of mechanical system

A system is described as follows: Consider a system consisting of two rotating bars of length $l$ and with uniform mass density and each with total mass $m$. The bars are attached to a common ...
0answers
30 views

### Find the relation between the displacements [closed]

Let there be a pulley moving downwards. It has mass $m_1$ to the left and $m_2$ to the right(latter has greater mass). Let in time interval $t$ , the pulley moves from $C$ to $C^`$ ; $m_1$ moves from ...
2answers
1k views

### Put a bullet into orbit around the moon

While I was watching this beautiful video, the absence of air friction pushed me to ask myself: While standing on the surface of the moon, what is the initial velocity by which you can fire a bullet ...
1answer
83 views

### Moving wedge and pulley system

A wedge of mass $M$ rests on a rough horizontal surface with coefficient of static friction $\mu$. The face of the wedge is a smooth plane inclined at an angle $\alpha$ to the horizontal. A mass ...
1answer
37 views

### Distance along projectile motion [closed]

I was doing kinematics these days, projectile motion. And I did the basic concepts: range, max height, time of flight, projectile on inclined plane. I am curious to know how we would solve a question ...
0answers
28 views

### At what speed (km/h) are the ride-goers (harnessed at opposite ends of ends of “propeller”) travelling? [closed]

The Revelation is one of the fastest and most exhilarating extreme rides in the world! Designed like a giant airplane propeller, the Revelation holds two to four riders comfortably in the cockpit ...
1answer
48 views

### What happens when the speed of a body is less than optimum speed?

Yesterday I learned about optimum speed. My teacher told that optimum speed is the speed with which one can take turns on banked road without wear and tear. $v_0=\sqrt{rg\tan\theta}$, $v_0$= ...
1answer
30 views

### How would we find what sort of a force this one is? [closed]

The potential energy for a force field is given by $U = -Kxy$, where $K$ is a constant. The body moves in an $x$-$y$ plane. Find the force vector. $i$ is the unit vector along the $x$ axis, $j$ is ...
2answers
49 views

### Find the minimum force that has to be applied to the block $m_1$ so that the other block just begins to slide

This is a problem from the book 'Problems in General Physics' by I E Irodov. Two blocks of masses $m_1$ and $m_2$ are placed on a rough horizontal surface, connected by a light spring. Find the ...
0answers
18 views

### Inclined plane problem with friction [closed]

A block of mass 6.0 kg slides from rest at a height of 2.0 m down to a horizontal surface where it passes over a 1.5 m rough patch. After crossing this patch it climbs up another incline which is at ...
0answers
32 views

### Max speed as a function of engine power

My question started out as finding the maximum speed of a go kart, taking into account only the drag forces as force opposing the motor. I've done some investigation to find:  F_{drag}=\; ...
0answers
34 views

### A force applied to an inclined plane

Below are two drawn diagrams of the problem with some explanation. Note: I think my notation for the force that the block exerts on the plane in the horizontal direction is not the standard ...
1answer
46 views

### Equation of motion for a double pendulum

firstly I am a Grade 12 Physics student currently doing my final experimental investigation which I decided to do on double pendulums. Before I got into this, I was under the impression that there was ...
1answer
41 views

### Coupled Spring System (3 mass 3 springs)

Hello I am having trouble trying to find the correct model for this coupled spring system. The scenario is the following we have: Ceiling - Spring - Mass(1) - Spring(2) - Mass(2) - Spring (3) - ...
1answer
48 views

### Rotating platform with pulleys and stacked blocks

This was a practice test question. Consider the following figure. (If the frictional coefficients are unclear, between A and B we have $k_1 = 0.3$, B and platform is $k_2 = 0.2$. If you further ...
2answers
151 views

### Block Sliding Down Hemisphere

A block of mass m slides down a hemisphere of mass M. What are the accelerations of each mass? Assume friction is negligible. a_M = Acceleration of hemisphere N_m = Normal force of M onto m N_M ...
1answer
61 views

### Confusion about Impact Force

Let a person of mass ( m ) = 10kg. then his weight will be 98N. Now, when he jumps from 1m height on the ground, the impact force becomes 9800N ( considering deflection of ground after impact is 1cm ...
1answer
76 views

### Determine the acceleration in a double Atwood machine

Trying to solve the following double Atwood machine: Suppose there is a mass of 12kg hanging on an ideal rope that wraps around an ideal pulley, and that the other end of the rope is attached to ...
1answer
50 views

### Calculating force of a car [closed]

I'm simulating car cruise system and my results are not making any sense. I have been told that my force formula is wrong but I don’t understand why it is wrong and how I can fix this. Does anybody ...
1answer
75 views

### Moment of inertia of a cylinder about its base

I've tried to find the moment of inertia of a cylinder rotating about an axis parallel to its base (i.e about the 'End diameter') as one can see here . But when I checked my results with different ...
2answers
43 views

### Deriving spring oscilation period [duplicate]

We have a spring attached to a wall and at the other part an object on a frictionless surface. I tried to calculate the spring oscilation period. I used the conservation of energy and kinematics ...
2answers
33 views

### Work done by a frictional force on a cylinder

A cylinder of mass $m$ and radius $R$, is rolled on surface with coefficient of kinetic friction $\mu_{k}$ about the axis passing through the center and parallel to the surface, with initial ...
4answers
74 views

### Is work done by how much velocity is changed or how much displacement is done?

A sailboat is moving at a constant velocity. Is work being done by a net external force acting on the boat? The answer key is "No" according to the work energy theorem about work is done when ...
3answers
82 views

### Projectile Motion with air Resistance - Adjust only the Angle to hit a target

OK, let me preface this by saying i am not a physics student, nor have i ever been. I am a software engineer working on a development degree. So this is homework but the assignment was just to create ...
1answer
450 views

### Can an elliptical orbit take the same time as a circular obit?

In the picture below you can see two orbits of potential pbjects. The main aspect of the orbits is that they have a collision point at the maximum of the elliptical orbit. My question is, could the ...
5answers
4k views

### Which ball touches the ground first?

This is a very well known problem, but I can't find an answer in the specific case I'm looking for. Let's consider two balls : Ball 1 weighs 10 kg Ball 2 weighs 1 kg Balls have identical volumes ...
1answer
42 views

### Gas pressure and centrifugal force

I think about a rotating torus (simplified tire) filled with ideal gas. Mass of gas is $m$ and molar mass is $M$. Pressure in non rotating torus is $p_0$. Temperature is constant $T$. Inner radius of ...
1answer
51 views

### Torque due to Gravity

I have learned that a torque on an object due to the gravity can be calculated as if the gravity acts on the center of mass of the object when the object is near the surface of the earth. Now I want ...
0answers
57 views

### How to find the force to cause certain trajectory? [closed]

So I got a little board today and decided to do some physics. What I came up with is confusing me alot. Say someone throws a rock and when this happens you get the known's of. From here is there a way ...
2answers
85 views

### Electrical force between two objects

I tried to solve the following problem: There are 2 objects . The object m1 with charge q and the object m2 with charge q.(same charge).The object m2 is connected with a rope to the ceiling. at the ...
0answers
19 views

### Does a pivot exert an additional force, normal to the centripetal force, on an object rotating about it?

A thin plank of mass $M$ and length $l$ is pivoted at one end. The plank is released at 60$^{\circ}$ from the vertical. What is the magnitude and direction of the force on the pivot when the plank ...
0answers
44 views

### Does a rotating plank only acquire rotational kinetic energy?

I have another doubt with a Kleppner problem :(. A thin plank of mass M and length l is pivoted at one end. The plank is released at 60$^{\circ}$ from the vertical. What is the magnitude and ...
1answer
55 views

### Does a spinning part affect the moment of inertia of a composite object?

I have been going back through some Kleppner problems and have a doubt concerning problem 6.18. It states: Find the period of a pendulum consisting of a disk of mass $M$ and radius $R$ fixed to ...
1answer
53 views

### Relative wind velocity explanation - understanding Irodov problem 1.6

I am having trouble understanding the reasoning behind the solution in this Irodov General Physics problem. The problem is 1.6: 1.6. A ship moves along the equator to the east with velocity vo = ...
1answer
24 views

### Calculate amount of energy based on height of object

How can you calculate the amount of energy an object produces that falls from a particular height? Or water. In an eg i would like to know how can you calculate the amount of electricity water can ...
1answer
33 views

### Apparent weight on a hill and in a ditch [closed]

first time posting. I'm trying to solve these 2 problems. I have a solutions I just don't know if I'm right...seems odd that they are the same answer... 1) If you are driving over a hill of ...
0answers
57 views

### How to calculate launch angle for tangentially launched satellites?

What is the value of theta for a satellite not falling back to the Earth if it is launched from the direction tangent to the surface of the Earth? I have found the escape velocity which is 11.18km/s, ...
4answers
103 views

### Is it possible to prove that projectiles with drag will not travel in a parabola under the theory of classical mechanics?

Can you prove that projectiles will travel in a parabola, provided the acceleration due to gravity $g$ does not vary significantly along the trajectory? This should take air resistance into account. I ...
1answer
27 views

### How to calculate required energy to displace a pendulum?

How can one calculate the amount of energy needed to displace pendulum with given mass m and string length L to $\alpha$ degrees from resting position when acceleration due to gravity is known?
1answer
44 views

### Calculate the weight that a hot air balloon can carry [closed]

Given a hot air balloon of radius 10 meters and negligible mass, calculate the maximum weight it can carry if the density of outside air is 1.2 $\frac{kg}{m^3}$ and the density of inside air is 0.9 ...