0
votes
0answers
38 views

Polarizing virtual photons to make fusion easier?

So, this is probably incredibly foolish, outlandish, etc but I figure I'd post it anyways. Basically I was thinking about how the Deuterium nuclei repel each other and how they do this by exchanging ...
0
votes
2answers
39 views

Energy realized in fusion and electrons?

I was doing this question about the energy released in a fusion reaction: In the mark scheme it included the mass of the electrons (for part cii) on the left and just used the mass of protons for ...
1
vote
1answer
30 views

Calculate the average temperature needed for hydrogen fusion reaction [duplicate]

my question is simple. How can we calculate the temperature needed in order to do the nuclear fusion things , and also the temperature after the reaction successful. If you can describe it, it ...
3
votes
1answer
69 views

When did the first carbon atom in the Universe come into existence?

I am a chemist with a passion for astrophysics and particle physics, and one of the most marvellous things I have learned in my life is the process of stellar nucleosynthesis. It saddens me how my ...
3
votes
2answers
94 views

How clean will first generation fusion reactors be compared to fission reactors?

Googling the topic seems to indicate that fusion reactors will produce less waste and less toxic radioactivity, but this fact never seems to be mentioned during the current debate over nuclear power. ...
3
votes
1answer
48 views

pp chain gamma decay / intermediate state

Based on the first equation at http://en.wikipedia.org/wiki/Proton%E2%80%93proton_chain_reaction $$_1^{1}H+_1^{1}H \to _2^{2}He+\gamma$$ Is it correct to say that in the P-P chain two hydrogen atoms ...
4
votes
1answer
67 views

What does the Coulomb barrier really mean?

I realize I'm trying to get a simple answer on a complicated subject, but here goes anyway. I've done some research and I understand (well, mostly) about how Vc is the amount of energy required to get ...
0
votes
1answer
30 views

What is the theoretical wattage output of a Tokamak fusion reactor?

By that I mean the complete radiative wattage of any type of energetic radioactivity or electromagnetic wave or even particle if that's what they output. My purpose is to compare this to the suns ...
0
votes
0answers
29 views

Does the plasma move in the tokamak?

I was reading about tokamaks, for usage in fusion, and it seems that the positive ions circle in one way in the toakmak, while the negative circles in another. That would make a lot of sense, as it ...
3
votes
2answers
264 views

Why can't Iron fusion occur in stars?

It is said that iron fusion is endothermic and star can't sustain this kind of fusion (not until it goes supernova). However star is constantly releasing energy from fusion of elements like Hydrogen ...
0
votes
1answer
180 views

Can we generate infinite energy by successive fission and fusion reactions?

Fission divides one Helium atom into two Hydrogen (Deuterium) atoms. And fusion, once again, puts together those two Hydrogen atoms into one Helium atom. In both reactions, overall output energy is ...
1
vote
2answers
435 views

How much iron would I have to shoot into the sun to blow it up?

My understanding--though it's from a Science Channel show so I'm not sure if it is correct--is that there is a fusion reaction happening in the center of the sun. Atomic nuclei are being created and ...
2
votes
2answers
99 views

Can Deuterium undergo a nuclear fusion without the presence of Tritium?

I've been reading about fusion fuels for a while now, and I understand that in Lithium-Deuterium fuel, the neutrons from the fission reaction bombard the Lithium to produce Tritium and the D-T ...
10
votes
1answer
490 views

With what probability does nuclear fusion occur at energies far below the Coulomb barrier?

Even at the core of the sun, the temperature of $\sim 10^7$ K only results in $kT\sim1$ keV, which is about a thousand times less than the electrical potential energy of $\sim1$ MeV needed in order to ...
2
votes
2answers
527 views

Would a matter-antimatter explosion cause fallout?

I know matter and antimatter annihilation release a lot of gamma rays which are considered ionizing radiation if I am not mistaken. But what if the explosion happened on the surface of the earth, ...
3
votes
2answers
287 views

What is the shielding in nuclear reactors mainly against?

I have a little knowledge about ionizing radiation and I have been confused over why nuclear reactors need these massive shields. So, if I am not mistaken, Alpha and Beta radiation are not that ...
2
votes
2answers
669 views

In nuclear fusion reaction, what is the percentage of mass converted to energy?

I read somewhere that it is about one percent of the mass, but I find this too high. Also I have done some calculations, for example, the Tsar Bomba was 50 MT bomb and weighed about 27 tons. Although ...
0
votes
2answers
122 views

Drop a star in a river [closed]

I (as I am sure you will be able to tell) know very little about nuclear physics, so please understand if something here seems dumb or obvious. I am going to question some Hollywood physics here. At ...
1
vote
2answers
476 views

Under what conditions is a pure fusion nuclear bomb possible?

Is it possible to build a pure fusion and powerful nuclear bomb? (because due to the harsh conditions of enriched uranium, I would guess most of today's world countries will want to build pure fusion ...
2
votes
1answer
118 views

Fusion vs. Fission

I understand why fission generates large amounts of energy when the nucleus is split, but then why does fusion generate such large amounts of energy. If fission releases energy when some mass is lost ...
6
votes
3answers
4k views

How do you build a nuclear reactor in your garage?

When I came across this link earlier today, I was astounded. Nuclear reactors are immensely complex devices that took scientists years to develop, and are usually housed in huge facilities. The link ...
1
vote
2answers
85 views

Theoretic Mass Energy Conversion?

say you had a large quantity of a heavy element such as uranium... AND you put a massive amount of energy into it, so that it began to undergo nuclear fission and transformed to a significantly ...
5
votes
1answer
1k views

Can open, unsafe nuclear fusion reaction burn the atmosphere?

I happened to hear people saying that the nuclear fusion bomb tests could set the atmosphere on fire. I have some serious doubts about that - but I have no facts. Nuclear fusion reaction requires ...
6
votes
2answers
340 views

Why is Helium-3 better than Deuterium

I see that many websites and magazines with physics thematic are pretty excited about mining Helium 3 isotope on the Moon. But this seems to be a very hard-to-get resource. For more than one reason: ...
1
vote
1answer
782 views

What is the lowest possible theoretical temperature that nuclear fusion can occur at?

I am not talking about the pseudo-science of so called cold fusion I am interested in what temperature you can get away with to produce fusion reaction. I was thinking in terms of micro-fusion or at ...
8
votes
2answers
170 views

What is the difference between the KDEMO and DEMO projects?

I'm writing a paper on the future of fusion technology and I can't seem to find the difference between Europe's DEMO experiment and Korea's KDEMO except for the fact that they are both planned to ...
2
votes
1answer
260 views

Is man-made Carbon Fusion possible?

In a type Ia Supernova, the carbon accumulated in the earlier stages of a stars death fissues to create even heavier elements. Could this be used by humans aswell? Is it theoretically possible to ...
11
votes
3answers
2k views

Nuclear fusion: what causes this “resonance” peak?

Can anyone explain why the $^{11}\mathrm{B}\mathrm{H}$ fusion cross-section has a peak near 150 keV, and why $\mathrm{D}\mathrm{D}$ and $\mathrm{D}\mathrm{T}$ have no such sharp peaks?
1
vote
1answer
137 views

Is there a good summary of all nuclear fusion approaches?

I am pretty sure, that during last 60 years of well-funded research a lot of ideas on nuclear fusion were already tried and ruled out. Is there some summary describing all of them and why they ...
1
vote
1answer
337 views

Complete list of nuclear fusion reactions

Could anyone suggest good source of all fusion reactions and their cross section vs energy graphs, including ones which were ruled out for nuclear fusion reactors (i.e. including endothermic and ...
7
votes
3answers
461 views

Nuclear fusion : ion vs atom fusion cross section?

I've read critique on ITER project (in Russian), and one of points was that cross section of ion-ion fusion is much lower than ion-atom and atom-atom, and that's the reason why it likely to not work. ...
3
votes
1answer
373 views

“Dynamic Albedo of Neutrons” and all these Farnsworth fusors

I've checked specs of Russian "Dynamic Albedo of Neutrons" module on Mars MSL rover - it can do 10^8 neutron pulses at 10 pulses per second. It works on D-T reaction in tiny linear accelerator, and ...
16
votes
2answers
476 views

Is there a sound theoretical argument against inner-shell induced nuclear chain reactions?

There is a claim often made about cold fusion, that it is excluded theoretically. The main theoretical argument is that electronic energies are too low to overcome the Coulomb barrier, since d-d ...
4
votes
1answer
2k views

How to explain $E=mc^2$ mass defect in fission/fusion

What is the nature of nuclear energy? This is closely related to the correct explanation of mass defect. I did some research of that topic and cannot come to a single comprehensive and consistent ...
3
votes
0answers
114 views

Helium Fusion and the Origin of Elements

In the fifth of his Messenger Lectures Feynman mentions the fact that Carbon-12 has an energy level at 7.82 MeV. He then states that this is what enables the fusion of three Helium-4 ions into Carbon ...
1
vote
1answer
161 views

Why does a coulomb explosion induce fusion?

If you strip the valence electrons apart with a very short intense electromagnetic field the remaining core explodes in a so called coulomb explosion. But experiments have shown that under certain ...
2
votes
1answer
254 views

How does the internuclear repulsion vary in Hydrogenic atom collision?

Hydrogen fusion requires two hydrogen nuclei to get close enough (typically a few fm) to fuse. Much of the problem of creating a fusion reactor is overcoming the Coulomb repulsion between a pair of ...
7
votes
2answers
355 views

What elements can be created in the fusion process of different types of stars?

As I understand it fusion inside a sun can produce heavier and heavier elements until some sort of "nucleus size limit" is reached. As far as I understand, the limit is thought to be reached with the ...
12
votes
2answers
306 views

Hydrogen as a fuel in Sun

The source of Sun's incessant energy is hydrogen; which is continuously converting to helium through nuclear fusion reaction releasing energy. Why does not all hydrogen convert into helium in one big ...
12
votes
3answers
1k views

How often does nuclear fusion occur within the human body?

I'm just curious. I figure atoms fuse occasionally just by chance, like quantum tunneling or rogue waves. Is this true? If so, any idea how often?
5
votes
2answers
1k views

Origin of elements heavier than Iron (Fe)

In all the discussions about how the heavy elements in the universe are forged in the guts of stars and especially during a stars death, I usually hear that once the star begins fusing lighter atoms ...
2
votes
1answer
444 views

How much energy can be extracted from hydrogen?

http://en.wikipedia.org/wiki/B-L says that the difference between baryon number and lepton number is conserved. Ordinary hydrogen has one of each, but turning it into helium releases only the binding ...