3
votes
0answers
28 views

How much weight is lifted from each side? [closed]

I don't know the math to do this, so I am asking here if someone can work this out with all of the details I'm providing. Total mass EST.: 2,400 lbs. Length from front to back: 14 feet 6 inches. ...
0
votes
1answer
43 views

Finding friction forces of stacked boxes on a table

Consider the following system. The given friction coefficients are for static. Let $g=10$ (meter per square second). If the $F(t)=10t$, for example, determine the friction forces $f_{AB}(t)$ ...
4
votes
4answers
263 views

Blocks stacked on an incline connected by rope around pulley

Two objects A and B, of masses 5 kg and 20 kg respectively, are connected by a massless string passing over a frictionless pulley at the top of an inclined plane, as shown in the figure. The ...
0
votes
0answers
53 views

Why friction force is force of constraint?

My understanding about constraint force is that it is a force which limits the geometry of particle's motion. For example, situations such as the particle trapped in a track or limited in domain can ...
0
votes
1answer
84 views

Help understanding a potential energy problem [closed]

Apologies if the following problem does not seem to involve potential energy, it is a homework problem that is labeled under the potential energy chapter. Question While a roofer is working on a ...
1
vote
1answer
427 views

Calculate work done in an inclined plane [closed]

How can you calculate the work done by a force (of unknown quantity) exerted on a 10kg block on an inclined plane. The force is pointing upwards and parallel to the incline (which is inclined 30 ...
-3
votes
1answer
59 views

Forces: why are the theta's equal?

I found this figure in my physics book, the task says that the incline got a angle of theta. How do figure out that the gravity and the y-axis got the same angle as the incline? There is no ...
-6
votes
1answer
170 views

Is it possible to find the coefficient of friction without frictional force? [closed]

I am working on the following problem: The braking acceleration for a car based on data in a driver’s handbook is –12.2 m/s2. If the car has a mass of 925 kg, find the frictional force and state the ...
-1
votes
1answer
53 views

What is the frictional force of this car? [closed]

The breaking acceleration for a car is $-12.2\frac{m}{s^2}$. The car has a mass of 925kg. I want to find the frictional force. Here is what I have so far: $$\Sigma\vec{F} = m\vec{a}$$ $$\Sigma\vec{F} ...
0
votes
2answers
421 views

What is the direction of static friction?

Note: My question is duplicate of the following Direction of friction when a car turns Why does friction cause a car to turn? I've gone through many related questions especially the first. As ...
-1
votes
1answer
89 views

What stops the car?

Centre of mass of a system cannot change its state of motion, unless there is an external force acting on it. Yet the internal force of brakes can bring a car to rest. Then what stops the car?
-1
votes
2answers
96 views

Friction acting on mass on string

Assume we have some stationary point mass that would slide, if not for some coefficient of friction, along a light, inextensible string, attached to two points at different heights. Considering ...
1
vote
1answer
109 views

If friction disregard area, why the direction you drag a long object matters?

I am talking here about dry friction between solid objects, for example a ruler and a table, not anything lubricated or fluid. I noticed that with a ruler and a table for example, if you drag the ...
0
votes
1answer
57 views

Find the force used to press a book against a leaned desk so it doesn't slip

I know there are several threads concerning this issue, but none of it helped me, so I decided to open a new one. So, the task is to find a force $F_{\mathrm{push}}$ on a desk which is leaned for an ...
0
votes
2answers
204 views

Direction of friction when a car turns

When a ball moves to the right, friction acts to oppose the motion, in other words, to the left. However, when a car travels around a bend, the friction acts in the perpendicular direction to the ...
2
votes
2answers
142 views

How is it possible to move something without completely lifting it?

For example, let's assume a chair here: It can be "slid" across the force if we use minimal upwards force, but not enough to actually "lift" the chair. Why should it move? Here's a better example: I ...
-3
votes
1answer
39 views

Acceleration on an inclined rail [closed]

I have to use $\vec{P}+\vec{R_N}+\vec{F_f}=m\vec{a}$ with $\|\vec{F_f}\|=\mu\|\vec{R_N}\|$ to express the acceleration as $$a_{x'}=g\sin\alpha(1-\frac{\mu}{\tan\alpha})$$ The configuration is (sorry ...
-1
votes
1answer
3k views

Rope tension between two objects [closed]

Let me explain the picture just to make sure. Object with mass 2 kg is being pulled with a force of F = 14.4 N. The whole system has an acceleration of a = 2.8 m/s^2. The friction coefficient ...
0
votes
3answers
99 views

$P\sin(\alpha)$ and not $\sin(\alpha)/P$?

Why is the force parallel to the surface that pushes the object $P \sin(\alpha)$ and not $\frac{\sin(\alpha)}{P}$? I didn't understand when they showed me it. can someone give me an answer in full ...
0
votes
1answer
343 views

Direction of friction in case of a rolling sphere

Suppose a ball rolls on a ground .obviously it is friction that helps to develop the required torque.Hence I find the direction of friction by pointing out the direction of rolling of the ball. But is ...
-4
votes
2answers
222 views

Why does a bicycle come to rest after travelling a distance?

According to Newton's law of motion, an object that is in motion will not change its velocity unless an external force acts upon it. In the case of a bicycle, if it is in motion with a certain ...
1
vote
1answer
318 views

Newtons Cradle, Collision Theory

It has come to the point in my computing program now where I have 5 swinging pendulums that are all modified at once by slider values. These values are drawn onto the from and passed through the class ...
-3
votes
3answers
152 views

Newton's laws of motion

According to Newton's laws, if net force is zero on a particle then the particle is at rest or in uniform motion, and if it is not zero then it is accelerating. So when a car moves on the road, ...
2
votes
3answers
248 views

Nature of frictional force

I was thinking about a situation where a person in standing on the ground with some friction. The frictional force is directly proportional to the normal reaction acting on him by the ground. Assume ...
1
vote
1answer
604 views

Calculating the frictional force

Here's my problem and the work I've done. The time is already past for me to submit the answer, but I want to know where I went wrong and why I was wrong. The 2-kg box slides down a vertical wall ...
2
votes
0answers
43 views

Impact of friction on a fallen body [closed]

If a body travelling at speed falls to the ground through an arc from a certain height (someone walking who trips, for example), how does friction of the ground surface affect the forces impacting ...
0
votes
3answers
86 views

Is it possible to reach the edge of a room if there isn't any gravitational acceleration?

Consider that a large room(an indoor badminton court) is orbiting the earth with a person floating exactly at its center without any relative initial velocity. Consider that the person has no ...
0
votes
0answers
25 views

Static friction greater than kinetic friction [duplicate]

Please explain why static friction is greater than kinetic friction logically. Speak about it microscopically and tell what does happen on surfaces of objects by considering electromagnetic force ...
-4
votes
2answers
1k views

How much force needed to push a car on neutral? [closed]

The car is a 2002 Toyota Corolla SE I have in my garage on a stone surface, I.e., the floor itself. What I want to know is how to determine the force needed to get it in motion at all. The curb ...
-1
votes
1answer
79 views

Force-Weight Pinewood Derby Car [closed]

Force-Weight Pinewood Derby Car. I'm trying to make a fast derby car. I was wondering if I could make a car that can drop/eject weight once it comes off of the incline. Would that increase speed or ...
0
votes
0answers
86 views

Mass on a plane, 'sideways' force on three points

I am trying to model sideways forces on three hydraulic cylinders (or 'legs) of different lengths resting on tilted ground, connected to a solid rectangular chassis with a center of mass slightly ...
5
votes
3answers
686 views

Why do we take small steps while walking on ice?

When we walk on ice we should take small steps. Small steps ensure: a.)larger friction. b.)small friction. c.)larger normal force. d.)smaller normal force. The correct ...
-3
votes
1answer
265 views

Question on static friction [closed]

This is the question, and the answer is given as 2). Now my basic doubt is, are they asking us the direction of the total contact force on the object by the floor? Or, are they asking the direction ...
1
vote
1answer
335 views

Mechanics question (a block on top of a block) [closed]

This question is very similar to this one here. A block of mass $m_1$ is placed on another block of mass $m_2$ lying on a smooth horizontal surface. The coefficient of friction (static and ...
-2
votes
1answer
259 views

Question on friction [closed]

Please look at the figure carefully. The question is written, and one has to match the two columns 1 and 2 given under "choices and explanation". Please tell me if I am really wrong, i.e. would you ...
5
votes
4answers
324 views

Comparing Static Frictions

In this figure, which of the static frictional forces will be more? My aim isn't to solve this particular problem but to learn how is static friction distributed . Since each of the rough-surfaces ...
0
votes
3answers
169 views

Smallest force to move a brick

Having a brick lying on a table, I can exert horizontal force equal to $\mu m g$ to a middle of it's side, and it will start moving (assume $\mu$ is the friction coefficient). However, can I make the ...
1
vote
1answer
1k views

Work done by friction

Suppose we have a block of mass $M$ and we are moving it up a curve, very slowly ($a=0$). The surface is not smooth, and coefficient of friction is $\mu=\mu_s=\mu_k$. To move the block we apply a ...
0
votes
1answer
387 views

A very elementary question regarding force of friction

When I first studied friction I faced f = $\mu$ N where f is force of friction, $\mu$ is coefficient of friction for the surface considered and N is the normal force for the body on surface. Now f is ...
3
votes
2answers
625 views

How can a train locomotive generate enough traction to pull all the coaches?

Sorry for posting what may be an obvious question but we just learning about friction at school and my teacher couldn't explain well enough to me and I would appreciate your inputs. Consider the ...
4
votes
3answers
312 views

How can a vertical force cause motion at an angle?

I just started learning physics 3 days ago and am having trouble understanding what I am doing wrong. Can someone please explain my error(s)? Thanks! We have a 1kg object on a plane at a 30 degree ...
8
votes
4answers
11k views

Block on a block problem, with friction

Consider two blocks, one on top of the other on a frictionless table, with masses $m_1$ and $m_2$ respectively. There is appreciable friction between the blocks, with coefficients $\mu_s$ and $\mu_k$ ...
1
vote
0answers
927 views

Newton's second-law word problems with coefficient friction [closed]

Here is an example problem: A sled of mass 50kg is pulled along a snow-covered, flat ground. The static coefficient of friction is 0.30, and the kinetic coefficient friction is 0.100. What force ...
1
vote
0answers
217 views

What is the angle of the string with the vertical?

A heavy uniform sphere of radius $a$ has a light inextensible string attached to a point on its surface. The other end of the string is fixed to a point on a rough vertical wall. The sphere ...
0
votes
2answers
548 views

What is the force of friction between two bodies given their masses and a force pulling them as a unit accross a surface?

Where a force of 200N pulls two blocks together(as one system) across a horizontal table top(µ=0.800) $m_A$ = 5.00kg, $m_B$ = 10.0kg Find the acceleration of the system. Find f$_k$ between B and A ...
5
votes
2answers
164 views

Boy and box on ice

I have a troubles. Can you help me? I have a task, called "slippery activity". Boy (he has $m=45kg$) Stands at ice and tries to move a big box ($M=90kg$) with a string (rope). Boy's Slip ratio is ...
2
votes
1answer
186 views

Moving along friction surfaces

If a particle moves along a one dimensional surface with constant friction. As the particle moves from point $A$ to point $B$ it loses an amount of energy equals $E(A,B)$. Consider that the particle ...
0
votes
0answers
21 views

Helpful tutorials on force [duplicate]

Possible Duplicate: List of good classical physics books I'm having a hard time understanding force in my highschool AP physics class, i looked through youtube but without luck. Could ...
14
votes
3answers
858 views

Why doesn't a fly fall off the wall?

Pretty simple question, but not an obvious answer at least not to me. I mean you can't just place a dead fly on the wall and expect it to stay there, he will fall off due to gravity. At first I ...
2
votes
3answers
1k views

How do I find work done by friction over a curve represented by a polynomial?

I am facing a problem in Physics. Problem: What will be the work done by the frictional force over a polynomial curve if a body is sliding on this polynomial($a+bx+cx^2+dx^3+\ldots$) curve from rest ...