for questions about design, process, data, or analysis of experiments and observations.

learn more… | top users | synonyms (2)

15
votes
0answers
479 views

Are the fast axes on Thorlabs quarter-waveplates mislabeled?

Some members of my lab are performing a polarization-sensitive experiment where they need to use a quarter-waveplate (QWP) with the fast axis in a specific direction. In the process of carefully ...
7
votes
0answers
106 views

Experimentally diminishing random errors for low wavelength UV observations

Part of the work that I do involves observations of solar low wavelength UV observations, specifically UV-B and UV-A II (up to 340nm). I have noticed that when I observe responses on a CCD or CMOS ...
6
votes
0answers
141 views

Statistical analysis of data in Physics

Analysis of data is integral in bridging the gap between theory and experiment. My question is about the two major methods of approaching the analysis - Bayesian and Frequentist. How much do the ...
6
votes
0answers
241 views

Does this method of predicting the ratio of translational diffusion coefficients for a sphere and a sheet, work?

Imagine that I have a spherical particle of molecular weight $M$, volume $V$, and some experimentally observed center-of-mobility translational diffusion coefficient $D_{sphere}$ in water. I take ...
5
votes
0answers
51 views

Why do flux qubits have to be micrometer-sized?

Flux qubits are made using micrometer sized Josephson junctions. They exploit superconducting properties to create and interfere with the magnetic flux between them. My question is that I've seen ...
5
votes
0answers
104 views

The use of Artificial Intelligence in physics resarch

I have been reading about a machine that observed a double pendulum and created equations that both described its motion and associated conservation laws. The authors claims: We have developed a ...
5
votes
0answers
110 views

Textbook about the handiwork of a HEP analysis?

I'm wondering if there is a textbook that describes the handiwork of a particle physics analysis. There are a bunch of books about theory, about the experimental aspects like detectors, and about ...
5
votes
0answers
204 views

Parity and Helicity of the Higgs Boson

I have been studying how the spin and parity of the new boson discovered at the LHC will be studied and have run into some confusion. The Standard Model Higgs is expected to be a scalar (i.e. have ...
5
votes
0answers
51 views

Experimental tests of Cluster Decmposition

How tight are experimental and astrophysical tests on whether Cluster Decomposition is satisfied at various space-like separations? Is there a review paper or a standard reference on the question? I ...
5
votes
0answers
179 views

Is there precision experimental evidence for Furry's theorem — that only even degree VEVs are non-zero?

Is there precision experimental evidence for or contradicting Furry's theorem -- that only even degree VEVs are non-zero, specifically for the EM field?
4
votes
0answers
25 views

How can the effects of temperature be accounted for in-situ electrical resistance corrosion monitoring?

In reading the Berkeley Lab's article Rust Never Sleeps, where research is underway investigating the use of iron oxide rust as a photovoltaic, they state: Rust – iron oxide – is a poor conductor ...
4
votes
0answers
277 views

Calculation of water bulk modulus using equation of state

I simply want to calculate the bulk modulus of water at 50C and increasing pressures. I think I am correctly calculating the new specific volume from the original conditions at (25C and 1atm) to 50C ...
4
votes
0answers
178 views

Baryonic density in collision experiments

Does anyone know any way of estimating the net baryon density in collision experiments, e.g. in LHC, RHIC, or the upcoming ones at GSI-FAIR? I have comes across many hand-waving arguments, sample - ...
4
votes
0answers
390 views

Toward the establishment of non-equilibrium (quasi-equilibrium) magnon BEC theory

In 2006, Demokritov et al have reported that they have achieved the observation of quasi-equilibrium magnon Bose-Einstein condensation (BEC) in YIG at finite (room) temperature by using the method ...
3
votes
0answers
38 views

How “steady” are screw threads?

I have a setup whereby two stainless steel end caps screw into a similar tube about 100mm in length and 25mm internal diameter. Thread is fairly standard, and is finger tight. The question is: ...
3
votes
0answers
19 views

How can I precisely measure the intensity of the Hydrogen Alpha (Balmer) line at low intensities?

I assume that I will need some kind of very precise filtering, but how is that accomplished? After that, photon counting at worst, but I am expecting millions of photons per second. The background is ...
3
votes
0answers
55 views

Large Hadron Collider 2015 upgrade, what can it show us?

I realise that the initial answer to my question that may come to mind is, "we don't know yet, duh!!" But my question is hopefully not opinion based. To be specific, have we now a greater chance of ...
3
votes
0answers
37 views

Energy dependence of integrating dosimeters

The graph shows the relative response of a dosimeter at different energies, normalized to 1.25 MeV Co-60 gamma rays. Curve A is the graph of the equation $$ ...
3
votes
0answers
85 views

Did these scientists actually detect dark matter?

I came across an article in The Guardian (definitely not the best source for science, but that's why I'm asking this question) that said that a team of scientists may have detected dark matter ...
3
votes
0answers
50 views

How could we find preons?

If I understand correctly, scientists were able to find strong evidence for the existence of quarks by using deep inelastic scattering. If quarks (hypothetically) are composed of preons, could we use ...
3
votes
0answers
70 views

Clarification about Bragg's law explanation

The Wikipedia has this illustration of Bragg's law and then says The two separate waves will arrive at a point with the same phase, and hence undergo constructive interference, if and only if ...
3
votes
0answers
84 views

Has the existence of anyons been experimentally verified?

I've been wondering whether there has been any experimental evidence for the existence of anyons or are they just objects of purely mathematical interest?
3
votes
0answers
30 views

Experimental results regarding non-extensivity in small systems

From a statistical mechanics point of view, the extensivity of thermodynamics arises from the fact that we can neglect interaction terms in the Hamiltonian. This allows us to infer that when we put ...
3
votes
0answers
53 views

Alternative ways to take particle tracks photographs in a cloud chamber

I know that the most common type of particle tracks photography is in photographic plates, but i'm using a cloud chamber and I would like to know if there are alternative ways to take photographs of ...
3
votes
0answers
106 views

Did Penzias and Wilson need such a large horn antenna to discover the CMB?

Penzias and Wilson discovered the 2.7K Cosmic Microwave Background (CMB) Radiation using a 6 meter horn antenna, along with a cryogenic low-noise detector measuring at 4 GHz: ...
3
votes
0answers
60 views

Converting impact speed to pressure magnitude

In explosive safety and stability testing, a drop test is commonly used to determine the sensitivity to impact. In the test, an impactor of known mass is dropped. The initial height varies throughout ...
3
votes
0answers
133 views

Irradiation of electronic memory circuits

I am investigating the radiation hardness of electronic memory circuits (EEPROM). The following measurement has been performed: Beam set-up: Irradiation occurred perpendicular to the DUT (device ...
3
votes
0answers
357 views

Pockels effect/Kerr effect

In Pockels electro-optic effect, change in Electric field produces change in refractive index/ birefringence. Moreover this effect becomes electric field squared in the case of Kerr effect. If we ...
3
votes
0answers
289 views

How is the Geometric Phase measured in the experiment?

I had read some papers that have mentioned the geometric phase (Berry phase) can be used to detect the quantum phase transitions in a quantum many-body system. My question is: How is it measured in ...
3
votes
0answers
139 views

List of cross sections?

Sometimes I need to look up a certain cross section, say the inclusive Z production cross section at $\sqrt{s}$ = 7 TeV. Is there a place where 'all the' cross sections are tabulated ...
3
votes
0answers
54 views

What is meant by the quantum integrity in a superconducting loop

I encountered this in the context of using squid microscopy to test for d-wave pairing in an iron arsenide superconductor where the goal of the experiment was to detect half integer flux quantum ...
3
votes
0answers
185 views

Why is a washing machine unable to spin-dry a duvet?

Background story: I put my duvet (synthetic filling) into a washing machine, and the machine was unable to spin-dry it. My mom told me: "It's because it is full of air". I was not satisfied with the ...
3
votes
0answers
198 views

How can one activate the decay of the quark b with PYTHIA event generator?

This is my problem and I hope finding a solution. _In the simplest alternative, MSTJ(22) = 2, the comparison is based on the average lifetime, or rather (c*tau "time life") , measured in mm. Thus ...
3
votes
0answers
25 views

Review of Gas Chromatographs?

Could anyone suggest a recent review article or book on gas chromatography instrumentation? My interest is in the devices themselves, rather than using them for a particular application. This ...
2
votes
0answers
34 views

Are Cosmic Microwave Background (CMB) photons entangled?

Suppose we'd like to know whether two cosmic microwave background photons emitted from different parts of the sky have any quantum correlation with each other. We could measure polarization of two ...
2
votes
0answers
35 views

Experimentally realizable states for bosonic quantum fields

I would like to know which type of quantum states of a bosonic field, that have an explicit analytical expression as vectors/density matrices in a symmetric Fock space, can be prepared in an ...
2
votes
0answers
86 views

Where does an LED use energy other than emitting light?

I have a quantum formula describing what kind of photon should be emitted by an LED depending on its voltage. Of course the colour is depending on the material, but every type of LED also needs its ...
2
votes
0answers
67 views

How do we get the power spectrum through the CMB?

How do we get the power spectrum through observing the CMB?
2
votes
0answers
44 views

What could cause the gradual loss (or change) of power in a CO2 laser over a long period (e.g. a year)?

For example, if it were a 10W CW CO2 laser that were used for ~45 minutes per day over a period of a year. Would you expect a slight reduction in power with age? Does the dissociation of CO2 occur ...
2
votes
0answers
28 views

What material could be used to study magnetic phase transitions in a college laboratory exercise?

I am working to develop a simple laboratory exercise in solid state physics to be conducted by fourth year students of physics. The idea of the exercise is for the student to get some experience in ...
2
votes
0answers
37 views

How to distinguish Shake-Up Satellites from Plasmons?

I am studying XPS spectra (X-ray Photoelectron Spectroscopy) at the moment. In XPS, different processes can influence the final state energy of detected electrons. One of these processes is the ...
2
votes
0answers
39 views

Scintillator Length Calculations

This is sorta homeworkish, yet it still relates to my understanding of the physics behind it as well. Does anyone know how you determine t_98 (aka the length to contain 98% of the energy) for a ...
2
votes
0answers
96 views

Formulas for Haitz's law?

The Nobel Prize in Physics 2014 is for LED. There is a related Haitz's law: ...every decade, the cost per lumen (unit of useful light emitted) falls by a factor of 10, and the amount of light ...
2
votes
0answers
140 views

Odd experiment results (electromagnetics)

Okay, a bit of background. So I'm working on a linear accelerator (you might know it as a Gauss rifle), and I had worked through the equations I thought I needed (Magnetic force, displacement, etc.) ...
2
votes
0answers
60 views

What is the highest frequency directly detected?

The Feynman Lectures of Physics states: In fact, although we mentioned many frequencies, no phenomenon directly involving a frequency has yet been detected above approximately $10^{12}$ cycles per ...
2
votes
0answers
31 views

Why is the current measured through a thin film increasing with time? (experimental question)

I'm doing an experiment: I'm thermally evaporating a metal in a vacuum onto a quartz (very insulating) substrate, between two gold contacts that I use to measure the current through the (growing) ...
2
votes
0answers
55 views

Strength of Magnet in Magnetic Bearings

While reading about magnetic bearings, one reads about passive/active magnetic bearings. By passive, one means no electric current is put into the bearing for attaining magnetic levitation/flux. In ...
2
votes
0answers
72 views

Is there a cheap way I can do a Bell inequality experiment?

My work is almost completely theoretical/computational. But I'd really like to do a Bell inequality experiment just so I can personally see this (the best way to learn something is hands-on, right?) ...
2
votes
0answers
95 views

Balloon tethering cable tension model (catenary tether)

If a moving balloon (let's say it's a blimp system with some rotors for movement) is connected to the ground by a cable that describes a catenary curve, how can we model the tension being applied on ...
2
votes
0answers
53 views

need data-point: count rate of APD (avalanche photo-diode) for specific aperture and stellar magnitude

I hope lab / experimental physics is fair game for this web-site. If not, sorry! I'm designing a sensor system to perform specialized [astronomy and space-sciences] experiments, and need a "reality ...