An electronic system, with closed loop current flow, and relative electrical potentials present across electrical components.

learn more… | top users | synonyms

19
votes
5answers
2k views

Does alternating current (AC) require a complete circuit?

This popular question about "whether an AC circuit with one end grounded to Earth and the other end grounded to Mars would work (ignoring resistance/inductance of the wire)" was recently asked on the ...
39
votes
2answers
24k views

On this infinite grid of resistors, what's the equivalent resistance?

I searched and couldn't find it on the site, so here it is (quoted to the letter): On this infinite grid of ideal one-ohm resistors, what's the equivalent resistance between the two marked nodes? ...
43
votes
7answers
4k views

Cyclist's electrical tingling under power lines

It's been happening to me for years. I finally decided to ask users who are better with "practical physics" when I was told that my experience – that I am going to describe momentarily – prove that I ...
5
votes
3answers
7k views

What happens when we connect a metal wire between the 2 poles of a battery?

As I remembered, at the 2 poles of a battery, positive or negative electric charges are gathered. So there'll be electric field existing within the battery. This filed is neutralized by the chemical ...
4
votes
2answers
641 views

Why is the voltage drop across an ideal wire zero?

I'm having trouble conceptualizing why the voltage drop between two points of an ideal wire (i.e. no resistance) is $0~V$. Using Ohm's Law, the equation is such: $$ V = IR \\ V = I(0~\Omega) \\ V = ...
18
votes
2answers
2k views

The “Nerd Sniping” problem. Generalizations?

This question is motivated by this xkcd comic strip . The problem is indeed interesting, and my first recollection upon reading this was a similar problem in the book Problems in General Physics by ...
7
votes
4answers
4k views

Resistor circuit that isn't parallel or series

What's the equivalent resistance in this circuit (between points A and B)?
11
votes
8answers
16k views

Electricity takes the path of least resistance?

Electricity takes the path of least resistance! Is this statement correct? If so, why is it the case? If there are two paths available, and one, for example, has a resistor, why would the ...
10
votes
3answers
449 views

Current in a simple circuit

I was going over my notes for an introductory course to electricity and magnetism and was intrigued by something I don't have an answer to. I remember my professor mentioning, to the best I can ...
4
votes
1answer
327 views

Why doesn't the electric field inside a wire in a circuit fall off with distance from the battery?

We studied electric fields due to point charges. The magnitude of these fields decreases with the square of the distance from the point charge. It seems to me that we could treat the positive ...
3
votes
2answers
2k views

Relating milliampere-hours to watt-hours for batteries

I've seen many batteries that are measured in milliampere hours (mAh), while others are measured in watt hours (wh). How can I convert them between each other so that I can actually compare them? It's ...
1
vote
1answer
72 views

Interpreting Physics Results Regarding Circuitry Analysis (Highschool Level Physics) [closed]

I conducted an experiment which aimed to detail and record the voltage across series resistors in series circuits. I noticed that: The Final Voltage, V3, stayed the same. The resistors with the ...
0
votes
1answer
10k views

What is the role of center-tapping in a full wave rectifier?

Note: I have already tried googling. Although similar questions have been asked on different forums, I couldn't find a detailed explanation, which I could really understand. Circuit diagram ...
0
votes
3answers
1k views

Direction of Magnetic force from a current running through a coil of wire

What is the direction is the magnetic force vectors pointing from a coil of wire that has current running through it? ...
5
votes
6answers
15k views

In an alternating current, do electrons flow from the source to the device?

If electrons in an alternating current periodically reverse their direction, do they really flow? Won't they always come back to the same position?
3
votes
4answers
3k views

Detecting if resistances are parallel or series in complex circuits

I know how to detect when resistors are arranged in parallel or series arrangement and I can also find their equivalent resistance in simple circuits or when resistances are connected in form of ...
1
vote
1answer
4k views

Current against the inverse of resistance graph, $I = V/R +c$

If I have a plot of current ($y$ axis) against 1/Resistance ($x$ axis). The circuit it is measured from is a simply 2 resistors connected in parallel to battery, where the potential across the ...
7
votes
3answers
2k views

Is it safe to use any wireless device during a lightning storm?

I need "educated" reasons whether it is safe to use any wireless device during a lightning storm. Most people said don't use it but they cannot explain why.
4
votes
1answer
641 views

How can I put a permanent current into a superconducting loop?

I know that you can use induction to create a current in a superconducting loop, but this only works as long as the coil that induces the field has a current flowing through it. And obviously, this ...
1
vote
4answers
2k views

Capacitor Charging and Discharging when connected to the ground

When we charge a capacitor using a battery and then remove the battery, the plates of capacitor becomes charged. One holds positive charge and the other one gets equal negative charge. o. k. ? Now ...
4
votes
3answers
4k views

is it possible to flow current in open circuit?

First , i don't know much about chemistry and physics. I'm just a graphic designer but i have this question in my mind. I'm sorry if this question is too basic and use 'generic' language. As i know ...
3
votes
1answer
204 views

Why is the anode (+) in a device that consumes power & (-) in one that provides power?

I was trying to figure out the flow of electrons in a battery connected to a circuit. Conventionally, current is from the (+) terminal to the (-) terminal of the battery. Realistically it flows the ...
1
vote
3answers
2k views

Magnitude of magnetic field at the center of circular wire

I'm preparing for an exam by solving the sample questions , here is the one I'm having difficulty with : Following is the given circuit. Which contains two resistance $R_1$ and $R_2$ in form of ...
1
vote
1answer
610 views

Physical explanation for capacitive circuit

In capacitive circuit, the voltage and current are out of phase. the current leads the voltage by 90 degrees. this can be explained by these two equations: $$V = V_{\max} \sin \omega t$$ $$I = ...
1
vote
2answers
1k views

Why does the light bulb's brightness decrease?

The book said that the brightness of R1 would increase and R2 would decrease. I don't understand this at all. Why does adding a wire from b to c change anything to R1? Shouldn't charge still flow ...
0
votes
0answers
56 views

Need to find the Vab of this circuit! [closed]

Find Vab in the circuit http://imgur.com/IqZ7Yis I uploaded a picture of the circuit. I tried adding 10 and 5 (top) because they appear to be in series. I also added 10 and 15 (bottom two) because ...
0
votes
2answers
220 views

Is $Q=CV$ still acceptable formular on the capacitor charged by the transformed circuit?

Assume there is a 100V to 1000V transformer and the capacitor connected in the second circuit.(You know, transformers have two circuits) The second circuit's voltage is 1000V, but the amount current ...
0
votes
1answer
569 views

measuring electromagnetic induction

There is a famous law which says that a potential difference is produced across a conductor when it is exposed to a varying MF. But, how do you measure it to prove? It is quite practical. ...
0
votes
4answers
625 views

Voltage drop along an idealized resistance-free wire in a circuit?

If you connected the positive terminal of a battery to the negative terminal to a battery with a wire with (hypothetically) no resistance, and are asked to give the voltage drop of a segment of wire ...
4
votes
2answers
1k views

Pn junction voltage drop?

This image from wikipedia, explains that there occurs a potential drop across a pn semiconductor junction, and an electric field confined to the depletion region. I already know the reason for the ...
1
vote
3answers
460 views

Is this really how a capacitor works? Why doesn't it behave like a resistor?

My book says a capacitor is two conducts being connected by an insulator. Now let's take a parallel plate capacitor to simplify the problem I have. Suppose I got two parallel plate capacitor in ...
-8
votes
3answers
3k views

Why current through all the resistors in series is considered to be same? [duplicate]

Consider the circuit shown, where $R_{1} > R_{2}$. I meant to say that resistance offered by the resistor 1 is greater than the resistance offered by the resistor 2. Keep $t$ constant i,e ...
8
votes
2answers
921 views

How does my hand amplify an FM radio signal?

I have a gizmo that broadcasts an FM radio signal from my phone's headphone socket to my car's radio antenna. Sometimes, there's another station on the same frequency with a stronger signal and my ...
4
votes
5answers
375 views

Intuitively, Why is Power Proportional to $I^2R$

As the resistance of a circuit goes down, the power increases because the current increases, assuming constant voltage. Why is this? I feel like resistance and current are inversely proportional, so ...
4
votes
5answers
5k views

Does a current carrying wire produce electric field outside?

In the modern texts of electromagnetism in the presence of stationary currents the electric field is assumed conservative $\nabla \times E =0 $. Using this we get $E_{||}^{out}=E_{||}^{in}$ which ...
4
votes
2answers
2k views

Strategies against 50 Hz mains hum on detector signals?

I'm having problems with a strong 50 Hz mains hum on signals created by photodetectors. I assume that they are due to ground loops and I realize that the best option would be to remove those. What are ...
4
votes
1answer
945 views

General integral to find resistance

My question is: is there a simple and truly general equation for the resistance between two electrical equipotential surfaces?. Obviously, if so, what is it, and if not, why? It would be very ...
2
votes
2answers
148 views

What does E/M field look like when I close a circuit?

Suppose that we have a charged capacitor with two pins: $ C_+ $ and $C_-$. Suppose that we have a long wire with fixed geometry, that is already connected to the pin C+. Let the ...
2
votes
1answer
1k views

How to find the total current supplied to the circuit?

Recently, I came across a question based on finding electric current of a circuit. Here's the image... I know, by using the formula $I=V/R$, we can easily calculate the current as $V$ is given and ...
2
votes
2answers
274 views

Is equivalent resistance always lower if we add a resistor to a passive electronic circuit?

How to prove that equivalent resistance of any passive network is always lower if we add a resistor between arbitrary two nodes? Note that this is not necessarily a parallel circuit, 2 nodes that we ...
2
votes
1answer
1k views

How are the CPU power and temperature caculated/estimated?

From Wikipedia The power consumed by a CPU, is approximately proportional to CPU frequency, and to the square of the CPU voltage: $$ P = C V^2 f $$ (where C is capacitance, f is ...
1
vote
1answer
109 views

Batteries and fields?

Batteries generate fields in wires that essentially cause the movement of electrons. I think of batteries as two charged plates that essentially contain a mechanism between them to move electrons from ...
1
vote
3answers
646 views

Questions about voltage

For some reason, I feel like the concept of voltage is escaping my grasp. I've done much research on these forums and through texts, and come across answers that seem quite well thought out, but still ...
0
votes
0answers
65 views

Why isn't resistance proportional to distance squared

Here we have a wire. At both ends there is an equal and opposite field caused by a chemical reaction. So, if we decrease or increase the distance between the two points, the strength of the field ...
0
votes
5answers
7k views

Why does voltage remains same over Parallel Circuit

Why does voltage remains same over parallel circuit. If a resistor is connected in the circuit some of the charge should be transformed into heat and make a lack of charge after the resistor (in my ...
-2
votes
1answer
325 views

Hard circuit problem [closed]

I want to find the p.d. between points A and B. I'm not sure how to approach this problem though, could I have a hint?
6
votes
2answers
209 views

Will I get a shock when I try to use my hair-dryer under water?

Occasionally people get killed in their bathtubs by having an electrical device such as a hair-dryer take the bath with them - in movies. It seems to be a common belief that this is realistic, even ...
5
votes
5answers
1k views

Does current flow back to the source through earth?

We know that if Single Line to Fault occurs, then fault current flows to the earth. I want to know whether the current will return to the source or not. For the current to flow we need a closed path. ...
4
votes
2answers
174 views

Voltage in a circuit

Suppose I have a following circuit: I do not understand, why the potential difference between the points $c$ and $d$ is equal to the potential difference between the points $b$ and $a$? That is, ...
4
votes
1answer
3k views

short circuit an alkaline battery

i'm not doing anything related to physics, but i'm just curious : What really happen when i short circuit an alkaline battery ? some article in the net shown that fire/explosion can be happened when ...