0
votes
2answers
21 views

potential difference in parallel connecting resistors

How could the potential difference be constant across all the resistors of parallel connecting resistors although each resistor has a specific resistance?
17
votes
4answers
1k views

Are voltages discrete when we zoom in enough?

Voltages are often thought of as continuous physical quantities. I was wondering whether by zooming in a lot, they are discrete. I feel like the answer to the above question is yes as voltages in the ...
0
votes
1answer
23 views

Name of battery voltage when load connected/disconnected

If I had a 3V battery, and when no load connected it reads 3.2V, and with a load 2.8V (just a hypothetical example), what is the name for these two terms, with a load or no load? I know the voltage ...
0
votes
1answer
55 views

Simple Parallel Electric Circuit [closed]

Ammeter (A1) and voltmeter (V) in series have parallel connection to another ammeter (A2). Currents in A1 and A2 are respectively 0.2 and 1.7 amp. Voltmeter's voltage is 6 volts. How should I find ...
1
vote
1answer
73 views

Interpreting Physics Results Regarding Circuitry Analysis (Highschool Level Physics) [closed]

I conducted an experiment which aimed to detail and record the voltage across series resistors in series circuits. I noticed that: The Final Voltage, V3, stayed the same. The resistors with the ...
0
votes
1answer
69 views

The Voltage and Current of a Discharged Inductor at the Instant the Switch is Closed

The figure shows an LR circuit with a switch and a 240-volt battery. At the instant the switch is closed the current in the circuit and the potential difference between points a and b, Vab, are ...
1
vote
0answers
61 views

Voltage in a lossless transmission line

I have a question where I'm deriving expressions for different variables within a lossless transmission line. Here's the question as posed: Consider a lossless transmission line of characteristic ...
1
vote
5answers
143 views

Ohm's Law Intuition

When we derive Ohm's Law using the Drude Model, we assume at one point of time that $E=V/L$, when is fact, $E=dV/dL$, unless $E$ is constant, in which case the assumption $E=V/L$ is true. But I don't ...
0
votes
1answer
47 views

Back EMF & Current, how can we make I stable?

Lets assume we have a wire that has $10V$ across and $1$ $Amp$ flowing, now if this conductor is introduced to a changing magnetic field, $-EMF$ is induced, can we control our voltage to increase it ...
0
votes
1answer
161 views

The shape of the graph of the equation: $V= -r I + E$

I have recently collected data (for a school experiment) in order to measure the EMF and the internal resistance of a solar cell. The data complied with the equation: $V = -rI + E$, i.e. the voltage ...
0
votes
2answers
82 views

Voltage Drop and Charge Flow

I am hoping someone can help me with understanding voltage drop and charge flow. Here is what I think I know. The voltage drop through a circuit must equal the voltage of the battery source, and ...
1
vote
4answers
72 views

Wrong positioned Ampere-meter and Voltmeter [closed]

I'm dealing with a problem here and even that I'm trying to solve it i can't It says: In what figures the voltmeter and ampere-meter are wrong positioned? I think that all the the others are ...
-1
votes
1answer
100 views

Electric shock from a frayed wire

Let's say it's a laptop charger not connected to a laptop, and it is frayed near the tip. I am guessing about 20Volts runs through that area. Now if a person touches a bit of plastic below the frayed ...
0
votes
2answers
165 views

How to calculate potential in circuit

In the following circuit (that has come up during a BJT DC analysis for what is worth), I'd like to calculate the potential at point B and point E. My notes say that $V_B = -10 + 0.7 = -9.3V$. ...
1
vote
4answers
214 views

Is voltage important when creating a magnetic field?

Would a DC circuit that has a high current and low voltage have a powerful magnetic field? I'm trying to create a powerful solenoid. In order to create a powerful magnetic field, I'm focusing more on ...
1
vote
3answers
722 views

Questions about voltage

For some reason, I feel like the concept of voltage is escaping my grasp. I've done much research on these forums and through texts, and come across answers that seem quite well thought out, but still ...
0
votes
1answer
130 views

Voltage and current in parallel circuit

I am having a bit of a tough time understanding the following: ...
0
votes
3answers
186 views

Current without voltage?

Suppose you have a 120 volt, 20 amp circuit which only has a light bulb connected. When measuring the voltage going to the light bulb my meter reads 120 volts. The basics taught me that a circuit is ...
1
vote
0answers
404 views

Finding potential difference (PD) between two points [closed]

How do I find the potential difference between two points in a circuit without using Kirchhoff laws?
-2
votes
1answer
336 views

Hard circuit problem [closed]

I want to find the p.d. between points A and B. I'm not sure how to approach this problem though, could I have a hint?
1
vote
1answer
57 views

In what way do passive circuit elements change the functional form of the voltage?

I heard capacitors affect the valleys and mounds of voltage sine curves, so that you get DC from AC. It's related to Graetz bridge, flipping signs of sine waves and seemingly afterwards smoothing ...
0
votes
1answer
3k views

Does the phase difference between voltage and current in an LCR circuit exist throughout the circuit?

I know that in an purely inductive circuit the current lags behind voltage by $90^o$, in a purely capacitive circuit vice-versa and in an LCR circuit the current may lag or gain with respect to ...
3
votes
1answer
920 views

Sign conventions for voltage drop and gain in circuit

In Sears and Zemansky's University Physics book and in many other books in English they define the following sign conventions (used for Kirchhoff loop rule for example): While in many other books ...
1
vote
1answer
126 views

Resistance and current

I'm not a current student at any school, but I am learning a new profession, and some of it is a basic understanding of elecrticity. I have some knowledge, but definitely not enough, and I have had to ...
1
vote
0answers
91 views

Circuit Analysis: Help getting the Thevenin equivalent [closed]

I am attempting to solve this problem which requires me to get the Thevenin equivalent of a circuit, and I've gotten as far as getting the equivalent resistance of the circuit (which I believe is 5 ...
0
votes
5answers
7k views

Why does voltage remains same over Parallel Circuit

Why does voltage remains same over parallel circuit. If a resistor is connected in the circuit some of the charge should be transformed into heat and make a lack of charge after the resistor (in my ...
0
votes
3answers
201 views

Potentiometer voltage change

I'm trying to understand simple things about electricity reading allaboutcircuits.com web. This chapter includes image which´s principle I don't understand. Here it is: When supplying constant ...
0
votes
4answers
629 views

If components of differing resistance are wired in parallel, how does a common voltage drop arise?

I've been teaching myself DC electronics as a hobby and, although I have a feeling i'm "missing something obvious", I was wondering if someone could help me out. If two components of differing ...
0
votes
1answer
67 views

Would the empirical behavior of a simple circuit match my model of it?

I have a practical problem in E&M which has baffled me and and my electrician. The copper water pipes in my house are carrying a current of small potential (~1V) AC current. Here is my ...
0
votes
0answers
102 views

About electric current analogy

my teacher gave me this analogy to the electric current , the wire is like a pearl necklace where the pearls can move, the current or the movement of electrons is like putting your fingers between 2 ...
2
votes
2answers
365 views

How to find $\tau$ in this circuit?

1) 2) I know, that $$ τ = \frac{L}{R} $$ but what is $R$ in this formula? It seems to be the total resistance, but how to find it in 1) and 2)?
0
votes
2answers
4k views

What happens when non-equal voltages are put in parallel? [duplicate]

If two batteries, say 2 volts and 5 volts, are connected in parallel, are there any problems? The higher voltage will then want to flow out, but also towards the lower 2 volt battery end, right?
2
votes
1answer
96 views

Help Understanding Non-conservative Fields

While watching a video lecture, I became uncomfortable with the results, (around 35 mins). The professor draws an electric circuit with a 1V batter, and two resistors (1 and 9 ohms). He then ...
0
votes
2answers
427 views

Out of phase voltage current source and resulting power

Examining the following graph, I am trying to understand the power plot. The power appears to take on a negative value when the current changes direction or the voltage changes polarity. Negative ...
0
votes
1answer
2k views

Relationship between resistance and voltage drop

In a series or parallel circuit, if two bulbs have the same resistance, do they have the same voltage drops? The problem I am asking about is below. Do A, B, and C have the same voltage drops since ...
0
votes
4answers
336 views

Why is there a potential difference?

The question then asks for the potential difference between $X$ and $Y$, which is claimed to be $3.6\text{ volts}%$. Why would there be a potential difference in this case? If I connect a lightbulb ...
2
votes
1answer
2k views

Effective resistance of inductor

In a lab experiment, we connected a simple circuit: an AC voltage source, connected (in series) to a variable resistor and an inductor. We measured the current in the circuit, and the voltage that ...
0
votes
1answer
627 views

How do I solve the current of this resistor using Maxwell's Current Theorem?

I've been trying to solve this using the method the prof. taught us, and I happen to know the answer but I can't reach it no matter how many times I've tried. The circuit in question is below: I am ...
6
votes
2answers
1k views

How electric currents can flow between 2 points at the same potential?

According to Ohm's law, if there is a potential difference, $V$, across a resistor then there is a current, $I$, flowing through it. Since we assume that points along the connecting wire are at the ...
0
votes
2answers
8k views

Confusion about P=VI and V=IR

If we look at $P=VI$, we see that if the current doubles then the potential difference is halved but this doesn't seem to make sense according to $V=IR$. If we look at that equation, since the ...
1
vote
1answer
266 views

Electromotive force

EMF is defined as: "The potential difference across the terminals of a battery or dry cell when it is giving no current to the circuit." So, if current starts to flow from the ...
1
vote
2answers
2k views

Basic questions about voltage drop in DC circuit

I understand all the concepts of what voltage is using all the analogies but some things related to the drop of voltage across a circuit confuses me. If I had a short circuit and attached a ...
5
votes
3answers
36k views

Why do we use Root Mean Square (RMS) values when talking about AC voltage

What makes it a good idea to use RMS rather than peak values of current and voltage when we talk about or compute with AC signals.
3
votes
2answers
423 views

Electrostatic notion of voltage as it applies to circuits

I have a question that's been bothering me about electric fields, voltage, and circuit analysis. Initially, I came to understand voltage as it was taught in the context of electrostatics - through ...
2
votes
3answers
7k views

Finding current using EMF & internal resistance

What exactly is the difference between internal resistance and resistance? This came up in the context of a homework problem I have been given: The circuit shown in the figure contains two ...
0
votes
0answers
96 views

what exactly do electric waves transfer from one point of the wire to other..? [duplicate]

Possible Duplicate: how does electricity propagate in a conductor? so basically i was considering the speed of the charges inside wire defined by the drift velocity and speed of electric ...
0
votes
1answer
369 views

Emf Of a Cell in a common circuit

My questions will be based on the above figure. The Emf Source V1 and R1 Together form a cell(R1 is internal resistance) R2 Represents the entire load on the source VoltMeter My teacher told ...
0
votes
2answers
8k views

How do I calculate output voltage from a given supply voltage and resistance?

I have searched everywhere but I can't seem to find out how I can calculate the output voltage (or voltage over a component) from the resistance of a resistor (or other component) and the supply ...
2
votes
1answer
273 views

What electric potential is found over individual resistors connected in series to an AC power supply?

Given a set of resistors connected in series to an AC power supply: What formula governs the peak-to-peak voltage which will be measured when voltage is probed over individual resistors and sets of ...
2
votes
2answers
2k views

Voltage and Current in transformers

In transformers, the ratio of the voltages equals the ratio of the turns - so double the output coil's turns and the output voltage doubles. Then, in order to conserve energy, current halves. This ...